1079 Accessories for inflatable boats 66 SCOPREGA GE 900AA- PLUS electric inflator Top flow electric inflator able to inflate any dinghy or inflatable structure in a short time and with little noise (max 85 dB). 25-mm diameter and 1.5-m long inflating hose and universal fittings included. Electric inflators | Inflators for SUPs | Inflation | Code Function V W Flow rate l/min Pressure Current draw A mm 66.448.05 Inflation + deflation 220 700 1700 250 mbar (3,6 psi) 4 150 x 170 x 220 BRAVO GE 20-2 electric inflator Designed to meet all requirements, it inflates at high volume. Technical specification: - Ergonomic handle. - High-efficiency and low-noise electric inflator. - Double-piston pumping unit. - Auto stop when selected pressure is reached. - Fast connection to cigarette lighter plug. - Battery life LED indicator. - 12V built-in DC battery rechargeable via cigarette lighter plugs or 110-240 AC/DC transformers. - Fitted with 12V with battery clips. - Inflation connectors suitable for the most common valves. Electric inflators | Inflating | Deflating Code Functions V W Flow l/min Max pressure Current draw A mm Sandproof filter 66.449.20 Inflation 12 108 125 1,5 bar (22 PSI) 9 200x320x2 20 Yes GE 230/1000 inflator Electric pump designed for professional use: manufacturers of inflatables, shipyards, fixing technicians and resellers. High air volume and pressure to quickly inflate any kind of inflatable and/or inflating structure. Electric inflators | Inflating | Deflating Code Functions V W Flow l/min Pressure cm 66.449.10 Inflation + deflation 230 1100 1500 3.3 PSI Ø 165 x 270 h GE 230/2000 electic inflator pump It consists of a main motor + booster to increase flow and pressure. The two motors can work in parallel or the main motor operates alone: this choice is possible by means of the two starting buttons (orange and red). Electric inflators | Inflating | Deflating Code Functions V W Flow l/min Pressure mm Basic With booster Basic With booster Basic With booster 66.446.93 Inflation + deflation 220 1000 2000 1200 2000 2 PSI 5 PSI 320x170x 260 ATMOS Integrated Air station 12V inflator IPX6 INFLATE/DEFLATE IGNITION PROTECTION The ATMOS onboard built-in inflator combines an elevated air flow and high-pressure capacity (20 psi / 1.37 Bar) and is therefore ideal for any kind of inflatable: tenders, SUPs, towables. It is IPX6 watertight and is designed to resist the most challenging marine weather conditions. Its newgeneration technology inflates and deflates rapidly and effortlessly. Compact and with reduced depth, ATMOS adapts to almost all the panels on board. Supplied with a 2.5-m inflating hose and a fittingvalve universal kit. Handy and ready to use, just set the target pressure on the display and start it: the inflator automatically stops when the set pressure is reached. ATMOS is ignition-protected certified (standard ISO 8846) so that is can be installed in area where flammable gases or fuel are stored. It complies with the directive EMC CE-RED (2014/53/UE) and the standard EN 62368. It comes in a practical and resistant storage bag. Average inflating time for SUPs: 6 to 8 minutes. Certifications: CE, ROHS, UN ECE R10, UKCA. It complies with the following standards: ISO 8846 and SAE J1171. Electric inflators | Inflators for SUP | Inflation | Code Scanstrut code Function V W A Max pressure Flow rate / Pressure Installation angle mm 66.452.01 SC-AOB-A2 Inflation + deflation 12 140 12 1.37 BAR (20 PSI) Flow rate 350 l/m (0-1 PSI) - Flow rate 70 l/m- (1-20 PSI) +10° to -30° 297x123 x198
RkJQdWJsaXNoZXIy MjM2MTk=