For UN Agenda 2030 #blueplanet SUSTAINABILITY Discover some of our commitments for the planet 100% carbon offset renewable energy Logistics warehouse powered by geothermal and solar energy system Supporting Amazonian reforestation using paper from responsibly managed forests according to the strictest environmental, social and economic standards. Full offset of transport-related emissions by adhering to Blue Valley project Working alongside organisations to achieve 2030 Agenda goals Initiatives and organizations we care about Powered by: How we help the planet 7 Boating simply
12 PM
13 Anchors, rollers and compensators 01
14 Anchors, rollers and compensators 01 Trefoil® anchor made of hot-galvanized cast steel With progressive penetration system. Trefoil | Trefoil anchors | Steel anchors | Cast Code A mm B mm C mm 01.110.02 2 175 358 210 01.110.05 5 273 469 310 01.110.07 7.5 298 531 360 01.110.10 10 320 583 375 01.110.13 12.5 330 630 395 01.110.15 15 335 655 425 01.110.20 21 395 701 470 01.110.30 32 410 800 560 01.110.50 50 470 980 660 01.110.80 80 560 1100 720 Trefoil® anchor made of mirror-polished AISI316 stainless steel AISI 316 Hand-crafted investment cast steel. Perfect aesthetic and dimensional result. Trefoil | Trefoil anchors | Steel anchors | Mirror- Anchors Code A mm B mm C mm 01.109.25 2.5 170 357 235 01.109.05 5 240 470 320 01.109.07 7.5 270 540 360 01.109.10 11 310 590 385 01.109.15 15 335 645 450 01.109.20 20 355 660 475 01.109.30 30 410 815 560 01.109.50 50 495 1000 665 Trefoil® stainless steel slide anchor with gripping plate Slide anchor with lock for low bows (similar to rubber dinghies) and inverted bows. Trefoil | Trefoil anchors | Steel anchors | SS Code A mm B mm C mm 01.117.10 10 320 570 385 Trefoil® folding grapnel anchor made of hot-galvanized cast steel PATENT The huge holding power of Trefoil® anchors combines with the convenience of folding grapnel anchors that are easily stowed onboard. Folding anchors | Trefoil | Trefoil anchors | Steel Code A mm B mm C mm 01.104.05 5 240 469 315 01.104.07 7.5 273 531 361 LEWMAR C.Q.R.® anchor Lifetime warranty against breaks and Lloyd’s Test Certification as High Holding Power anchor. CQR | LEWMAR | CQR anchors | LEWMAR Metal frame Forged Recommended chain mm Recommended for hulls up to m A mm B mm C mm D mm E mm 01.147.07 01.145.65 7 6 6 626 253 82 439 287 01.147.09 01.145.09 9 8 9 690 279 86 484 313 01.147.11 01.145.11 11 8 11.5 740 299 90 552 336 01.147.16 - 16 8 14 827 335 94 584 373 01.147.20 - 20 10 18 901 366 100 635 405 01.147.27 01.145.27 27 10 19 989 402 106 700 445 01.147.34 - 34 11 20 1071 435 112 754 481 - 01.145.64 66 12.5 22 1337 537 128 933 583
15 Anchors, rollers and compensators 01 LEWMAR Epsilon anchor SUPER-HIGH HOLDING POWER Deriving its sturdiness and quality from the Delta anchor, the Epsilon anchor is Super-High Holding Power certified by Lloyd. Its concave fluke and ballasted keel ensure record holding and super-fast grip. Delta | LEWMAR | Delta anchors | LEWMAR Stainless steel Recommended chain mm Recommended for hulls up to m A mm B mm C mm 01.127.06 6 6-7 10 483 271 8 01.127.10 10 8 13 573 332 10 01.127.16 16 8 15 670 376 12 01.127.20 20 10 17 720 406 12 01.127.25 25 10 18 778 438 16 01.127.32 32 10 21 839 474 16 01.127.40 40 10 23 907 512 20 01.127.50 50 12 25 974 550 20 01.127.63 63 12 27 1049 595 22 E01.127.xx LEWMAR Delta® zinc-plated steel anchor HIGH HOLDING POWER Its best features include: - Exceptional holding power to grab into any seabed (including seaweed grounds). - Quickness to re-grab the hold when the spinning boat tends to trip the anchor. - Real ability to improve its hold when the wind increases. Tests carried out under various conditions confirm that the Delta anchor has the best hold/weight rate. Lifetime warranty against breaks and Lloyd’s Test Certification as High Holding Power anchor. Delta | LEWMAR | Delta anchors | LEWMAR Code Recommended chain mm Recommended for hulls up to m A mm B mm C mm D mm E mm 01.108.04 4 6-7 7 514 228 8 387 210 01.108.06 6 6-7 9 595 263 10 450 241 01.108.10 10 8 11 695 308 12 526 283 01.108.16 16 8 13 812 360 12 614 334 01.108.20 20 10 15.5 877 389 16 663 361 01.108.25 25 10 17 945 417 16 713 384 01.108.32 32 10 18.5 1026 455 16 774 417 01.108.40 40 10 20 1099 489 20 835 446 01.108.50 50 12 23 1175 520 20 890 479 01.108.63 63 12 26.5 1278 568 22 673 518 LEWMAR Delta® DTX stainless steel anchor New version of the renowned Delta Inox, DTX is 100% of 316 stainless steel. With unchanged and patented geometry, still unmatched, it ensures high holding power to grab into any seabed and quickness to re-grab the hold under all conditions. Certified as Ordinary Holding Power, 3-year warranty. Delta | DTX | LEWMAR | Delta anchors | Code Recommended chain mm Recommended for hulls up to m A mm B mm C mm D mm E mm 01.106.10 10 8 9.5 695 310 13 526 282 01.106.16 16 8 13 812 362 13 614 328 01.106.20 20 10 15.5 877 392 16 663 357 01.106.25 25 10 17 945 415 16 713 387 01.106.32 32 10 19 1023 453.5 20 775 425 LEWMAR Delta® stainless steel anchor HIGH HOLDING POWER Ultra-resistant stainless steel version with the same high performance as the standard Delta. Lifetime warranty against breaks and Lloyd’s Test Certification as High Holding Power anchor. Delta | LEWMAR | Delta anchors | LEWMAR Code Recommended chain mm Recommended for hulls up to m A mm B mm C mm D mm E mm 01.107.10 10 8 11 695 308 12 526 283 01.107.16 16 8 13 812 360 12 614 334 01.107.20 20 10 15.5 877 389 16 663 361 01.107.25 25 10 17 945 417 16 713 384 01.107.40 40 10 20 1099 489 20 835 446 01.107.50 50 12 23 1175 520 20 890 479 01.107.63 63 12 26.5 1278 568 22 673 518
16 Anchors, rollers and compensators 01 E01.138.xx E 01.139.xx Folding grapnel anchors - Hot galvanized cast steel version. Counterweight bar fitted to the shank to improve anchor balance (Norwegian SAV system). - Mirror-polished AISI 316 stainless steel version, ideal for dinghies. Folding anchors | Grapnel anchors | Steel Hot-galvanized cast steel Mirror-polished AISI 316 SS A mm B mm C mm 01.139.00 - 0.7 175 165 48 01.139.15 01.138.15 1.5 310 265 75 01.139.25 01.138.25 2.5 360 315 85 01.139.32 - 3.2 420 365 100 01.139.04 01.138.04 4 470 380 110 01.139.06 - 6 565 440 130 01.139.08 - 8 575 490 140 01.139.10 - 10 610 595 130 01.139.12 - 12 650 640 130 DANFORTH type galvanized anchor Made of hot-galvanized steel. Very thick plate. Steel anchors | DANFORTH | DANFORTH Code A mm B mm C mm 01.143.04 4 505 425 295 01.143.06 6 610 450 335 01.143.08 8 670 460 380 01.143.10 10 705 525 420 01.143.15 15 885 635 570 01.143.20 20 1001 670 585 01.143.30 30 1008 760 655 DANFORTH type AISI316 anchor AISI 316 Mirror-polished AISI316 stainless steel anchors. Ideal for muddy and sandy seabeds. Steel anchors | Danforth | Danforth anchors | SS Code A mm B mm C mm 01.146.07 7 630 485 340 01.146.09 9 670 500 400 01.146.12 12 760 540 420 01.146.15 15 900 570 430 01.146.20 22 990 665 515 01.146.28 28 1080 695 550 LEWMAR LFX anchor Made from high-grade anodised aluminium, the LFX anchor demonstrates exceptional anti-corrosion resistance and performs superbly under high loads while being extremely lightweight. The anchor has the additional feature of being simple to disassemble and store in a locker. Anodised aluminium anchors | LFX | LEWMAR | Code Recommended chain mm Recommended for hulls up to m OPTIONAL storage bag A mm B mm C mm 01.111.02 2 6 8 01.098.01 564 462 342 01.111.03 3.2 6-7 10 01.098.01 672 550 407 01.111.04 4.5 8 12 01.098.01 746 610 452 01.111.07 7 10 14 01.098.02 853 699 517 01.111.10 10 10 16 01.098.02 954 781 579
17 Anchors, rollers and compensators 01 FORTRESS anchor, can be disassembled Adjustable fluke angle to adapt to any seabed. Made of sturdy anodized aluminium-magnesium alloy. Ideal as sheet anchor. Cited as the best anchor currently available on the market, it came out top in five independent tests, one of which was carried out by the U.S. Navy. Aluminium anchors | Fortress | Fortress anchors Code Replaces SS anchors kg For hull size m OPTIONAL canvas stowage bag A mm B mm C mm 01.100.11 3.2 4/6 8/10 01.099.02 685 559 406 01.100.16 4.5 6/8 10/12 01.099.03 787 635 457 01.100.23 6.8 8/13 12/14 01.099.04 914 737 533 01.100.37 9.5 13/23 14/16 01.099.05 1016 813 610 01.100.55 14.4 23/29 16/18 01.099.06 1168 940 686 01.100.85 21.2 32/41 - - 1300 1040 760 Hall traditional anchor Sturdy hot-galvanized steel anchor for any seabed. Fitted with sharp-angle articulated arm. Steel anchors | Galvanized anchors | Hall anchors | Hall | Traditional anchors | Mooring | Anchorage and mooring | Anchorage Anchors Code A mm L1 mm L4 mm 01.142.25 2.5 290 160 140 01.142.04 4 320 180 170 01.142.05 6 350 210 210 01.142.08 8 380 230 230 01.142.10 10 400 240 240 Hall anchor Made of hot-galvanized cast iron. Cast iron anchors | Galvanized anchors | Hall anchors | Hall | Traditional anchors | Mooring | Anchorage and mooring | Anchorage Anchors Code A mm L1 mm L4 mm 01.103.18 16 330 310 230 01.103.28 23 350 350 245 01.103.36 34 410 395 280 01.103.48 45 465 445 325 01.103.65 60 505 505 315 Plough anchor Made of very thick high-strength hot-galvanized steel. Similar to CQR anchors, excellent performance on all seabeds. Steel anchors | Galvanized anchors | Plough anchors | Plough | CQR anchors | Mooring | Anchorage and mooring | Anchorage Anchors Code A mm B mm C mm D mm E mm F mm G mm 01.144.07 7 260 640 340 230 540 220 55 01.144.09 9 330 780 410 280 600 280 65 01.144.12 12 320 800 430 280 650 280 65 01.144.16 16 380 950 500 320 760 310 75 01.144.22 22 400 1050 490 360 800 345 80 01.144.27 27 520 1090 520 380 830 380 85 01.144.35 35 580 1110 580 410 920 410 95 Admiralty anchor Hot-galvanized steel anchor with foldable flukes for better stowage. Folding anchors | Galvanized anchors | Steel Code A mm B mm C mm D mm E mm F mm 01.114.05 5 382 50 60 380 205 230 01.114.10 10 490 60 70 500 255 280 01.114.15 15 550 60 80 542 290 320 01.114.20 20 590 68 90 600 340 360 01.114.25 23.5 615 68 90 640 340 360 01.114.35 35 660 75 130 780 370 400
18 Anchors, rollers and compensators 01 Chains, connectors and anchoring accessories Hot-galvanized calibrated chain OK FOR WINDLASS Suitable for windlasses. The tangles of chain are delivered in wooden boxes or convenient packages easy to handle and stock. Each single metre of chain has an OSC distinctive mark to ensure quality. Chains | Galvanized chains Length when stretched Ø mm kg/m Working load kg Breaking load kg Standard P mm B mm 25 m 50 m 75 m 100 m 150 m 01.373.06-025 01.373.06-050 01.373.06-075 01.373.06-100 - 6 0.800 400 1600 DIN766 / ISO 18.5 20 01.373.08-025 01.373.08-050 01.373.08-075 01.373.08-100 - 8 1.400 800 3200 DIN766 / ISO 24 26 01.373.10-025 01.373.10-050 01.373.10-075 01.373.10-100 01.373.10-150 10 2.350 1250 5000 ISO 30 35 - 01.373.11-050 - 01.373.11-100 - 10 2.300 1250 5000 DIN766 28 34 01.373.12-025 01.373.12-050 01.373.12-075 01.373.12-100 01.373.12-150 12 3.350 1800 6500 ISO 36 40 - 01.373.14-050 - 01.373.14-100 - 14 4.400 2500 10000 DIN766 / ISO 41 47 Hot-galvanized calibrated chain, Grade 70 high-resistance type OK FOR WINDLASS Under the same mechanical resistance conditions, this chains enables the use of a lower section: a) 8-mm OSC-G7 instead of 10-mm standard; b) 10-mm OSC-G7 instead of 12-mm standard. This allows for a 40/60% saving in weight or, weight being equal, a 40 to 60% longer chain. The tangles of chain are delivered in wooden boxes or convenient packages easy to handle and stock. Each single metre of chain has an OSC-G7 distinctive mark to ensure quality. GRADE 70 Chain | Galvanized chainLength when stretched Ø mm kg/m Working load kg Breaking load kg Standard P mm B mm 50 m 100 m 01.370.08-050 01.370.08-100 8 1.400 1400 5600 DIN766 / ISO 24 26 01.370.10-050 01.370.10-100 10 2.300 2200 8800 ISO 30 35 AISI 316 stainless steel calibrated chain OK FOR WINDLASS AISI 316 Suitable for windlasses. The tangles of chain are delivered in wooden boxes or convenient packages easy to handle and stock. Each single metre of chain has an OSC distinctive mark to ensure quality. Chains | SS chains | Steel chains | AISI316 Length when stretched Ø mm Kg/m Working load kg Breaking load kg Standard P mm B mm 25 m 50 m 75 m 100 m 150 m 01.375.06-025 01.375.06-050 01.375.06-075 01.375.06-100 - 6 0.800 400 1600 DIN766 / ISO 18.5 20 01.375.08-025 01.375.08-050 01.375.08-075 01.375.08-100 - 8 1.400 800 3200 DIN766 / ISO 24 26 01.375.10-025 01.375.10-050 01.375.10-075 01.375.10-100 01.375.10-150 10 2.350 1250 5000 ISO 30 35 - 01.375.12-050 01.375.12-075 01.375.12-100 01.375.12-150 12 3.200 1800 7240 ISO 36 40
19 Anchors, rollers and compensators 01 Hot-galvanized Genovese chain Elongated link version. Ideal for fixed and dock mooring (no winch). Chains | Galvanized chain Length when stretched Ø mm kg/m Working load kg Breaking load kg 50 m 100 m 01.372.06-050 01.372.06-100 6 0.73 340 1360 01.372.07-050 01.372.07-100 7 1.1 460 1840 01.372.08-050 01.372.08-100 8 1.33 600 2400 01.372.10-050 01.372.10-100 10 2.075 940 3760 01.372.12-050 01.372.12-100 12 3 1360 5440 AISI 316 stainless steel Genovese chain AISI 316 Elongated link version. Ideal for fixed and dock mooring (no winch). Chains | SS chains | Steel chains | AISI316 Length when stretched 50 m Ø mm kg/m Working load kg Breaking load kg 01.374.03-050 3 0.165 110 450 01.374.04-050 4 0.3 200 800 01.374.05-050 5 0.5 310 1250 01.374.06-050 6 0.73 450 1800 01.374.08-050 8 1.3 800 3200 01.374.10-050 10 2.05 1250 5000 Shackle with Allen-head recessed pin AISI 316 Made of AISI 316 stainless steel, it enables the anchor to fit into the bow rollers without getting tangled. Anchor shackles | Steel shackles | Mooring | Pins | Anchor pins | Steel pins | Steel shackles Chains, connectors and anchoring accessories Code A mm B mm D mm L1 mm 01.080.05 5 10 10 20 10 01.080.06 6 12 12 24 10 01.080.08 8 16 16 32 10 01.080.10 10 20 20 40 5 01.080.12 12 24 24 48 - 01.080.14 14 28 28 63 - 01.080.16 16 32 32 64 - Bow shackle with Allen-head recessed pin AISI 316 Made of AISI 316 stainless steel, it enables the anchor to fit into rollers without getting tangled. Anchor shackles | Steel shackles | Mooring | Pins | Anchor pins | Steel pins | Bow shackles | Bow pins Chains, connectors and anchoring accessories Code Ø mm A mm B mm 01.081.06 6 12 27 01.081.08 8 16 37 01.081.10 10 20 46 01.081.12 12 25 55 01.081.14 14 28 60 Anchor Rode Set: line, chain, connector and anchor The easy solution for anchor lines to suit a wide range of installations and requirements. Each set is delivered "ready to go" in a dedicated package. The spliced mooring line is fitted with a chain link suitable to the chain. Windlasses | Anchor lines | Lines | Mooring | Code Anchor type Anchor kg Chain Ø mm Chain length m Chain link Line length Line Ø mm Anchor-chain connector mm Anchorchainconnector Hulls with winch Recommended for hulls up to (approx.) m 01.700.01 Grapnel 4 6 5 Genovese 35 10 8 Galvanized shackle No 4-6 01.700.02 Grapnel 6 6 10 Genovese 35 10 8 Galvanized shackle No 5-7 01.700.03 Grapnel 8 7 10 Genovese 35 12 10 Galvanized shackle No 6-8 01.710.01 Hall 4.2 6 5 Genovese 35 10 8 Galvanized shackle No 4-6 01.710.02 Hall 6.2 6 10 Genovese 35 10 8 Galvanized shackle No 5-7 01.710.03 Hall 8.8 7 10 Genovese 35 12 10 Galvanized shackle No 6-8 01.800.01 Trefoil 7.5 6 25 Sized 35 12 8 Swivelling joint Yes 5-7 01.800.02 Trefoil 10 6 25 Sized 35 12 8 Swivelling joint Yes 6-8 01.800.03 Trefoil 13 8 25 Sized 35 14 8 Swivelling joint Yes 7-10 E 01.700.xx E 01.800.xx E 01.710.xx
20 Anchors, rollers and compensators 01 Anchor connector without protrusions AISI 316 Anchor connector made of AISI 316 stainless steel without protrusions. It lets the anchor chain slide smoothly through the bow roller and avoids entangling of the shackle. Steel connectors | SS connectors | Osculati Code Chain Ø mm B mm L mm G mm P mm H mm C mm 01.220.01 6/8 10 16 22 9 90 7 01.220.02 9/10 13 19 29 11 115 11 Anchor swivelling connector AISI 316 Made of precision-cast AISI 316 stainless steel without protrusions, used to connect the chain to the anchor. It lets the anchor chain slide smoothly through the bow roller and avoids entangling of the shackle. New reinforced model with additional finish, exclusively made by Osculati. Steel connectors | SS connectors | Connectors | Code Chain Ø mm B mm L mm G mm P mm H mm C mm 01.740.08 6/8 10 16 21 9 95 7 01.740.09* 6/8 10 17 20 10 90 7 01.740.10 9/10 13 21 28 11 120 11 * Suitable for 20-kg Trefoil® anchors Anchor maxi swivelling connector AISI 316 Made of mirror polished AISI 316 stainless steel. Used to connect the chain to the anchor, maxi version for 12/14 mm chains. Steel connectors | SS connectors | Connectors | Code Chain Ø mm B mm L mm G mm P mm H mm C mm 01.740.12 12/14 19 29 30 23 140 14 Mega swivelling anchor connector made from CNC-machined bar AISI 316 Made of polished AISI316 stainless steel. Steel connectors | SS connectors | Mooring | Code For anchors kg Chain Ø mm B mm L mm G mm P mm H mm C mm 01.740.16 50/80 14/16 35 20 36 18 176 20 01.740.17 up to 100 up to 18 38 20 36 18 176 24 Anchor double-joint swiveling connector AISI 316 Made of AISI 316 stainless steel without protrusions. This double-joint swivelling connection is the evolution of the single-joint 01.740.08/10 model. Steel connectors | SS connectors | Connectors | Code Chain Ø mm Total length mm B mm L mm G mm P mm H mm C mm 01.742.08 6/8 117 9 16 21 10 95 8 01.742.10 9/10 155 13 19 28 13 120 10 Twist anchor swivelling connector AISI 316 PATENT Made of mirror-polished AISI316 stainless steel. With the latest asymmetric anchors (Bruce, Delta, Trefoil® etc.), when the anchor is raised, it most probably turns the wrong side. The Twist swivelling connector turns the anchor correctly and it reeves into the roller or hawsehole. A shackle connects the fixed eye to the anchor. Steel connectors | SS connectors | Osculati Code Chain Ø mm Connecting shackle A mm B mm C mm 01.738.01 6/8 01.080.10 220 60 28 01.738.02 10/12 01.080.10/12/14 320 83 38
21 Anchors, rollers and compensators 01 Trimmer anchor swivelling connector AISI 316 Polished AISI 316 stainless steel. Fitted with a double joint to avoid the lever boom effect with held-on anchor. Anti-oscillation connection to the anchor during lifting when approaching the roller/ bow. Safety screws. Side load 3 times as powerful as traditional connectors. Steel connectors | SS connectors | Connectors | Code Chain Ø mm A mm B mm C mm 01.739.01 6/8 200 15 7/17 01.739.02 10/12 230 22 20/30 01.739.03 12 235 27 30/50 Rope/chain connector AISI 316 Designed to connect the anchor chain into the respective line, without knots; it is also suitable for stern mooring. Made of mirror-polished AISI 316 stainless steel. Rope/chain | Mooring | Stainless steel Code Chain Ø mm For ropes Ø mm 01.230.01 6 10 01.230.02 8 12 Chain link for calibrated chain AISI 316 Made of AISI316 stainless steel. Highly resistant due to its structural design that includes 8 locking pins capable of reaching working and breaking loads equal to or higher than those of the chains. Measures in mm (while the other connecting links available on the market are in inches) that fit precisely into windlass calibrated chains, they slide smoothly onto the gypsy preventing dangerous jamming. Chains | Steel chain links | Calibrated chain links Code Ø D mm A mm B mm 01.672.06 6 31.5 20.5 01.672.08 8 40.5 26.5 01.672.10 10 50.5 35.5 01.672.12 12 61 40.5 Chain link Made of stainless steel, for calibrated chain Chains | Steel chain links | SS chain links | Stainless steel Chain Ø D mm A1 mm A mm L mm L1 mm 01.671.06 6 11 23 33 21 01.671.08 8 12.5 29 40 24 01.671.10 10 15 34.5 48 29 01.671.12 12 19 42 62 38 Galvanized steel swivel made for anchor chains and buoys Double eye, ideal for mooring lines Steel swivels | SS swivels | Chain swivels | Buoys Code A mm L mm L1 mm B mm B1 mm 01.427.10 10 125 23.5 51 30.8 01.427.12 13 165 33 63 36 01.427.14 16 200 40.8 75.5 42.6 01.427.16 19 225 42.8 88.5 50 AISI316 stainless steel swivel Double eye, ideal for mooring lines. Steel swivels | AISI316 | Double eye swivels | SS Code A mm L mm L1 mm B mm B1 mm 01.018.04 4 50 13 19.5 11.5 01.018.05 5 60 13 23 13 01.018.06 6 65 15 26 15 01.018.08 8 90 22 35 20 01.018.10 10 115 27 44 24 01.018.13 13 148 33 59 33 01.018.16 16 188 42 75 39 E 01.428.xx; 01.427.99 E 01.428.xx; 01.427.99 E 01.429.xx; 01.428.99 E 01.429.xx ; 01.428.99 E 01.439.xx E 01.439.xx Mirror-polished AISI 316 stainless steel swivel Very sturdy, forged steel, ideal for mooring buoys, halyards, anchor chains, etc. Steel swivels | AISI316 | SS swivels | Chain Shackle + shackle Shackle + shackle (flush pin) Eye + shackle Eye + shackle (flush pin) A mm B mm C mm D mm 01.428.99 - 01.427.99 - 60 10 11 5 01.429.00 01.439.00 01.428.00 01.438.00 66 12 11 6 01.429.01 01.439.01 01.428.01 01.438.01 88 16 16 8 01.429.02 01.439.02 01.428.02 01.438.02 113 20 22 10 01.429.03 01.439.03 01.428.03 - 152 26 28 13 01.429.04 - 01.428.04 - 188 32 36 16 E 01.438.xx E 01.438.xx
22 Anchors, rollers and compensators 01 Braid Made of polyester, as per regulations for anchors. Lines | Braid | Mooring | Polyester | Ropes Chains, connectors and anchoring accessories Code Ø mm Length m 01.106.00 8 30 01.106.01 10 30 Line with chain Orange levilene line as per regulation for anchors. Fitted with a 2-metre galvanized chain and a shackle for connection to the anchor. Lines | Mooring | Levitene | Ropes | Chains | Galvanized chains | Shackles | Pins | Chain and rope Chains, connectors and anchoring accessories Code Ø mm Length m 01.105.00 8 30 Line for chain and rope windlass. Made with three-strand white rope and stainless steel chain link, the end part can be connected to the windlass chain. Windlasses | Anchor lines | Lines | Mooring | Code Ø mm Length m Gypsy Ø mm Chain link Ø mm For windlasses 02.636.01 10 35 6 6 Manual mooring, Lofrans: Project x1; Italwinch 02.407.01 02.636.02 12 35 6 6 Lewmar: Pro-series 1000, V-700, V1, V2 Lofrans: Project x1, Dorado 500W, Marlin; Lewmar CPX0; Italwinch Ray; Italwinch RayLux 02.834.00 14 35 8-10 8 Lewmar: Pro-series 1000, V1, V2, V3, V4 Lofrans: Project x1-x2-x3, Project 1000-1500, Dorado 700W, Clipper 700-1000; Italwinch Thunder, Italwinch ThunderLux 02.636.05 16 40 10 10 Lewmar: Pro-series 1000, V3, V4,V5 Lofrans: Project x2-x3, Project 1000-1500, Clipper 1000; Italwinch Thunder Lux Ø 16 Anchor line made of polyester braid with lead core in the first 10 metres Terminal with thimble and hand-made splicing. It comes in an elegant nylon bag with blue string. Ropes | Lines | Polyester lines | Braids | Sheets | Code Ø mm Length m Lead core length m Lead weight kg Total weight kg 06.446.10 10 30 10 3 5 06.446.12 12 30 10 4 7.5 06.446.13 12 50 20 8 10 Chain Boy chain stowing system PATENT It allows tidy chain stowage on all anchor chain lockers. Minimum locker height when hauling in the anchor: 80 mm for 6/8-mm chain, 100 mm for 10/12-mm chain. Chain Boy | Chain stowing systems | DOUGLAS Code Base Ø mm Head Ø mm Adjustable height 01.550.00 150 170 325 to 475 mm by means of the inserts included Chain Stopper Deluxe device made of stamped sheet + precision-cast parts. AISI 316 The chain stopper device prevents the anchor rode unwanted release while the boat is in use. It also prevents shock/abnormal loading of the windlass while the boat is at anchor. The Chain Stopper can be disengaged with a simple movement. Chains | Safety | Mooring | Anchoring Chains, connectors and anchoring accessories Code For chain Ø mm Base mm Protrusion mm 01.119.34 6/8 60x50 47 01.119.35 10/12 80x70 63 E01.119.50 E01.119.51 ITALWINCH steel chain stopper Chain stopper compatible with the most common chains (8- to 14-mm diameter and locking pin). Made of 100% AISI316 stainless steel. Code Base mm For chain Ø mm 01.119.50 110x62 8mm ISO - 8 mm DIN 766 - 10mm ISO - 10mm DIN 766 01.119.51 130x85 12mm ISO - 13mm DIN766 - 13mm DIN 764, 14mm ISO - 12,5 C.T., 14 C.T.
23 Anchors, rollers and compensators 01 E01.747.06 E01.747.10 Anchor gripper kit It consists of eyebolt and Pad-Eye + high-resistance strap + snap-hook. Made with 100% rustproof tape, it doesn’t scratch or bang against the deck. Reflective tape seams for high visibility at night. To be installed near the winch as safety gripper to prevent the anchor from falling during navigation. Anchors | Eyebolts | Pad-Eye | Straps | Snap- Code For chain Ø mm Length cm Anchorage point Snap hook 01.747.06 6/8 20 39.181.05 09.247.70 01.747.10 10/12 25 39.873.01 09.247.10 Chain Rainbow marker PATENT METS NOMINATION 2003 Coloured plastic inserts for fitting into chain links. Sold in kits for marking 25 cm of calibrated chain. Chain markers | Chains | Mooring | Chain Insert colours For calibrated chain Ø mm No of inserts white blue yellow red green 01.500.06BI 01.500.06BL 01.500.06GI 01.500.06RO 01.500.06VE 6 14 01.500.08BI 01.500.08BL 01.500.08GI 01.500.08RO 01.500.08VE 8 10 01.500.10BI 01.500.10BL 01.500.10GI 01.500.10RO 01.500.10VE 10 8 01.500.12BI 01.500.12BL 01.500.12GI 01.500.12RO 01.500.12VE 12 8 Chain Rainbow marker kit, assorted colours PATENT METS NOMINATION 2003 Package of assorted Chain Rainbow markers to mark a whole length of chain. The kit includes markers in 5 colours (white, blue, yellow, red and green). Chain markers | Chains | Mooring | Chain Code For calibrated chain Ø mm No of inserts 01.501.06 6 70 01.501.08 8 50 01.501.10 10 40 01.501.12 12 40 ERest on the first welded part E01.500.xx E 01.501.xx Mooring device and anchor chain gripper AISI 316 Designed to be hooked to the chain link, it relieves tension from the chain, and therefore prevents abnormal loads on the windlass. Made of polished precision-cast AISI 316 stainless steel. Chains | Chain stoppers | Safety | Mooring |Chain Code For chain Ø mm 01.744.06 6/8 01.744.10 10/12 KONG Chain gripper stainless steel U-bolt A special U-bolt used to connect the second anchor chain to each point of the main anchor chain. A traditional shackle is very often difficult to fit into the narrow links of a calibrated chain. Connectors | Anchors | Chain grippers | Kong | Code For chain Ø mm 01.743.01 6/8 01.743.02 10/12 PAOMAR anchor retriever Made of fiberglass reinforced polymer. It always retrieves the anchor and the line. Adjustable release load from 20 to 200 kg, long lasting in the marine environment. Anchors | Anchor retrieval | PAOMAR | Tangled Code To be used with anchors up to kg hulls up to m lines chains 01.101.00 8 8 YES YES Anchor retriever AISI 316 Made of AISI 316 stainless steel, it is used to retrieve anchors that are tangled in lines, sag of chains, chains or others. Anchors | Anchor retrieval | AISI316 Code Ø mm 01.102.00 180
24 Anchors, rollers and compensators 01 E01.211.09 EProtection for anchor buoy GRIPPY: compact and lightweight signalling buoy with self-winding ultraresistant braid line and solar recharge automatic night light Fitted with 2 fully watertight chambers housing electronic and mechanical parts, which prevents possible malfunctions due to the marine environment. Extremely lightweight and compact, it has a 200-mm diameter and weighs as little as 1.2 to 1.5 kg. The ABR version is fitted with a pioneer technology that blocks the line sliding when GRIPPY exceeds 90° inclination while retrieving the anchor so that the signalling buoy can be recovered from its line without using the boat hook. The end of the GRIPPY line has to be connected to the anchor crown, and it will automatically unwind when deploying the anchor. The line self-adjustment lets GRIPPY float on the anchor perpendicular consequently signalling its position. At night, GRIPPY automatically activates its solar-powered night lights (LIGHT, HEAVY and ABR versions). In case of tangled anchor, it can be tripped by retrieving the buoy rope, whose breaking load exceeds 500 kg in the BASIC and LIGHT versions and 1200 kg in the HEAVY and ABR versions. When retrieving the anchor, GRIPPY will automatically wind its line and will position under the boat bow. It comes with a convenient stanchion support (LIGHT, HEAVY and ABR versions) and a pull-out visual signaller. lLghtweight signalling buoys | Compact Code Model Anchor buoy length m Anchor buoy breaking load kg SS buoy protection cable Description Handrail support Ø mm 01.211.05 Grippy Basic 15 500 Yes, 500 kg With visual signaller Yes 200 1.2 01.211.02 Grippy Light 25 500 Yes, 500 kg With visual signaller + night automatic lights Yes 200 1.3 01.211.03 Grippy Heavy 20 1200 Yes, 1200 kg With visual signaller + night automatic lights Yes 200 1.4 01.211.04 Grippy ABR 20 1200 Yes, 1200 kg With visual signaller + night automatic lights Yes 200 1.5 01.211.09 10-m extension (1200-kg breaking load). GRIPPY Tracker: the signalling buoy with integrated GPS that monitors the anchor wind drift. No false alarm, extremely accurate, fitted with wireless handheld control GRIPPY Tracker constantly supplies data on GPS position, high and low tide, anchor drift, attempted theft, tampering and impacts on the anchor buoy, sending alarms and warnings to the handheld control (via SMS for the portable version). GRIPPY Tracker combines a powerful GPS receiver and mechanics able to self-adjust on the anchoring point. A micro-processor system detects high and low tide, the anchor drift caused by currents and high wind, and counteracts any possible false alarm. A very simple and user-friendly handheld control monitors the anchor at all time and if it drifts exceeding a preset range, the control immediately warns of the possible danger. The portable version of the Tracker handheld control has a rechargeable battery featuring over 100 hours of lifetime as well as a pre-installed SIM (no expiry, no subscription) that sends notifications to your smartphone. ABR system, 1,200-kg breaking load of the anchor buoy, stainless steel buoy protection, night light, guardrail support and solar recharge. lLghtweight signalling buoys | Compact Code Model Anchor buoy length m Anchor buoy breaking load kg SS buoy protection cable Handrail support Night light ABR system Ghost function Alert notification by SMS Rechargeable battery 01.221.01 Tracker (console) 20 1200 Yes, 1200 kg Yes Yes, solar charge Yes Optional No No 01.221.02 Tracker (portable) 20 1200 Yes, 1200 kg Yes Yes, solar charge Yes Optional Yes Yes, 12/24V, USB Type-C EBuoy protection EHandrail support
25 Anchors, rollers and compensators 01 Stainless steel rollers DOUGLAS MARINE AISI316 stainless steel bow shield Mirror-polished AISI316 stainless steel bow shield, bored and countersunk. Supplied already bent, it adapts to the different bow shapes when installed. With oversized thickness, it resists even the most violent impacts. Bow shields Code Thickness mm 01.290.01 2 340x520 1.78 01.290.03 2 680x450 3 Bow roller for dolphin strikers Made of stainless steel for mounting under the dolphin striker. Bow rollers | Dolphin strikers | Anchor winch | Code Sheave material Recess fit width mm Spare sheave 01.119.92 Hard rubber 85 01.219.94 Bow roller, compact version Made of satin-finish stainless steel with nylon sheave. Bow rollers | Dolphin strikers | Anchor winches | Code Length mm Width mm Height mm Spare sheave 01.118.82 155 51 72 01.218.82 Bow fairlead Very sturdy and practical, made of AISI316 stainless steel, nylon sheave suitable for ropes up to 14 mm and for chains up to 6/8 mm. Product by Osculati. Steel fairleads | Bow fairleads | AISI316 Code Length mm Base mm 01.349.00 130 90x90 E 01.118.91 E 01.118.83 Bow roller with safety pin Made of satin-finish stainless steel. Hard rubber sheave. Bow rollers | Dolphin strikers | Anchor winches | Code Length mm Width with safety pin mm Spare sheave Anchor max weight kg Max Ø line mm chain mm 01.118.83 280 55 01.218.82 15 24 10 01.118.91 231.5 51 01.218.82 15 24 10 E 01.118.83 E 01.118.91
26 Anchors, rollers and compensators 01 Bow roller with fairlead Made of satin-finish stainless steel, suitable for mounting over or under the dolphin striker. Bow rollers | Dolphin strikers | Anchor winches | Steel rollers | SS rollers | Mooring Stainless steel rollers Code Length mm Width mm Spare sheave 01.118.86 393 52 01.218.82 01.119.94 500 84 01.219.94 01.119.95 588 98 01.219.95 E 01.118.86 E 01.119.94 E 01.119.95 Bow rollers for small vessels AISI 316 Mirror-polished stainless steel with thermopolymer sheave. Bow rollers | Steel rollers | SS rollers | Mooring Code Length mm Width mm Height mm Spare sheave 01.118.80 205 45 53 01.346.51 E 01.484.12/14 E 01.484.13 Bow roller for anchor retrieval Stainless steel, Chromelux® finish, fitted with nylon sheave and upper safety pin. Bow rollers | Windlasses | Steel rollers | SS Code Length mm Width mm Height mm Versione Spare sheave 01.484.12 210 57 70 Standard 01.346.50 01.484.13 210 57 70 With anchor locker 01.346.50 01.484.14 170 57 70 Short 01.346.50 Cast AISI316 stainless steel bow roller, compact version AISI 316 Mirror-polished precision-cast AISI 316 stainless steel bow roller with nylon sheave. Bow rollers | Anchor winches | Steel rollers | SS Code Length mm Width mm Height mm Base mm Spare sheave 01.484.09 155 62 75 90x62 01.346.50 AISI316 cast bow roller AISI 316 Mirror-polished precision-cast AISI316 stainless steel, white nylon sheave. Universal for lines or chains up to approximately 10 kg. Bow rollers | Anchor winches | Steel rollers | SS Code Length mm Width mm Height mm Base mm Spare sheave 01.484.10 221 82 80 132x82 01.346.30 Roller Made of polished stainless steel. Nylon sheaves. Bow rollers | Windlasses | Steel rollers | SS Code A mm B mm C mm Plate thickness mm Suitable for anchors max kg 01.332.01 200 54 80 2 7.5 01.332.02 270 54 80 2 10
27 Anchors, rollers and compensators 01 Classic heavy hinged roller Made of polished stainless steel. Nylon sheaves. Universal for DELTA / BRUCE / TREFOIL / CQR / SOC. Bow rollers | Anchor retrievers | Steel rollers | Code A mm B mm C mm Plate thickness mm Suitable for anchors max kg 01.333.01 330 70 117 4 10 01.333.02 400 70 117 4 15 01.333.03 495 90 150 5 20 01.333.04 595 90 150 5 30 01.333.05 695 90 150 5 30 Compact lightweight hinged roller Made of polished stainless steel. Nylon sheaves. Universal for DELTA / BRUCE / TREFOIL / CQR / SOC. Bow rollers | Steel rollers | SS rollers | Mooring | Code A mm B mm C mm Plate thickness mm Suitable for anchors max kg 01.333.10 300 80 80 3 10 01.333.11 400 80 80 3 15 E 01.350.01 E 01.350.02 Bow roller with anchor locker AISI 316 Made of mirror-polished precision-cast AISI 316 stainless steel. Fitted with lock for anchor models Danforth, Bruce, Trefoil®, CQR, etc. Unbreakable stainless steel sheave. Bow rollers | Windlasses | Steel rollers | SS Code A mm B mm C mm Width mm Version 01.350.01 205 105 155 75 Short 01.350.02 340 240 160 75 Standard Hinged bow roller with safety pin AISI 316 Made of stainless steel, suitable for all anchors up to 14 kg. Nylon sheave. Bow rollers | Windlasses | Steel rollers | SS Code Length A mm Width C mm Height L mm Spare sheave large small 01.419.00 320 90 70 01.519.01 01.519.02 Hinged bow roller with fairlead up to 20 kg Made of 4-mm thick polished stainless steel plate, fitted with chain guide, suitable for any type of anchor from 10 to 20 kg. Stainless steel sheave. Bow rollers | Windlasses | Steel rollers | SS Code A mm B mm C mm D mm E mm L mm 01.337.00 416 230 186 114 47 81
28 Anchors, rollers and compensators 01 Self-locking roller AISI 316 Suitable for Bruce and Trefoil® anchors, made of mirror-polished precisioncast AISI 316 stainless steel. Unbreakable stainless steel sheave, fitted with Ushape anchor stopper. Bow rollers | Windlasses | Steel rollers | SS Code A mm B mm C mm L mm For anchors up to max kg For calibrated chains Ø mm 01.341.99 380 261 196 67 10 6/8 01.341.96 480 300 240 75 15 8/10 01.341.98 590 340 235 78 20 10/12 01.341.97 590 340 240 82 30 10/12 Shimming chock AISI 316 Designed to ease anchor pay-out if the bow section does not allow for the correct angle of the anchor into the roller. Rollers | Anchors | Roller angle | Bow rollers Code L1 mm For rollers 01.341.90 45 01.341.99 01.341.91 57 01.341.96/97/98 Special roller for Bruce and Trefoil® anchors Made of polished stainless steel plate, this bow roller makes the most of the Bruce and Trefoil® anchor design to provide a self-locking feature. Nylon sheave. Bow rollers | Windlasses | Steel rollers | SS Code A mm B mm C mm L mm For 01.342.10 370 250 187 89 Bruce/Trefoil® up to 10 kg 01.342.20 542 375 250 88 Bruce/Trefoil® up to 20 kg Roller with fairlead AISI 316 Suitable for Delta, Bruce and Trefoil® anchors, made of mirror-polished AISI stainless steel, fitted with a double sheave. It does not include an anchor locker kit. Bow rollers | Windlasses | Steel rollers | SS Code For anchors kg A mm B mm C mm L mm Recommended for 01.336.01 6/10 620 300 200 83 Delta 6/16 kg - Bruce/Trefoil® 7,5/15 kg 01.336.03* 16/25 670 340 170 85 Delta 16/25 kg - Bruce/Trefoil® 7,5/20 kg * 01.339.21 Anchor locker kit including rollers, anchor stopper and screw knob for 01.336.03 E01.339.21 E01.339.10 E01.339.20 Bow roller with anchor locker kit AISI 316 Mirror-polished cast AISI 316 stainless steel, wide overhang area to prevent anchors from touching the bow. Stainless steel sheaves, suitable for anchors CQR, Bruce, Danforth, Trefoil®, Delta etc. Bow rollers | Windlasses | Steel rollers | SS Code A mm B mm C mm D mm E mm L mm For anchor max kg For chains Ø mm 01.339.10 410 160 250 62 25 85 12 6/8 01.339.20* 530 240 290 88 22 102 20 8/10 * 01.339.21 Anchor lock kit including rollers, anchor stopper and screw knob for 01.339.20 E01.339.21
29 Anchors, rollers and compensators 01 E 01.120.07/10/20 E 01.121.07/10/20 E 01.120.xx E 01.121.xx Bow roller + Trefoil® anchor with anti-water plate AISI 316 SELF LAUNCHING Bow roller fitted with an anchor having a coupling plate that closes perfectly the hole on the hull. This system makes the plate strike against the roller preventing water from leaking into the forepeak. The roller is designed to match the Trefoil anchor for a combination of high-level products in style and performance. The system can be easily installed by 4 studs behind the roller and is fitted with two sheaves for smooth sliding of the chain. Made from 100% mirror-polished AISI316 stainless steel. It is recommended to install it on the chain by means of the Twist joint 01.738.01. Windlass ideal pull angle at 5° / 20° from the roller horizontal axis. Bow rollers | Steel rollers | Stainless steel rollers Code Description mm A B C D 01.120.07 Trefoil anchor 7.5 kg 7.5 535 230 352 - 01.120.10 Trefoil anchor 10 kg 10 588 331 383 - 01.120.20 Trefoil anchor 20 kg 20 702 370 468 - 01.121.07 Bow roller 7.5 kg 6.3 150 168 232 322 01.121.10 Bow roller 10 kg 9.3 117 203 279 305 01.121.20 Bow roller 20 kg 12.6 206 224 270 254 Evideo
30 Anchors, rollers and compensators 01 Evideo Mr. Fantastic extendable roller EXTENDABLE IDEAL FOR VERTICAL BOW SELF LAUNCHING Made of mirror-polished stainless steel, ideal for Trefoil or similar anchors. Fitted with an innovative gas spring system that moves the anchor away from the bow before being launched. At the same time, a tilting movement lets the anchor drop automatically while keeping it at a safety distance from the bow. The roller has a 22-cm extension stroke and is mainly suitable for vertical bows. Its lightweight and sports shape is well-suited to the hull and its steel frame is designed to withstand high loads. Extensible rollers | Mr. Fantastic Code For anchors kg Extension mm A mm B mm C mm D mm Ø mm Plate thickness mm 01.338.07 7.5 - 10 130 468 357 120 228 8.4 5 01.338.15 10 - 15 200 625 480 120 270 10.4 5 01.338.30 20 - 30 220 750 600 140 310 10.4 8 Universal anchor locker Adjustable to roller 01.337.00 and others, made of stainless steel. Rollers | Safety | SS anchor lockers | Universal Code Base mm Height mm 01.337.10 68x55 92 + knob
31 Anchors, rollers and compensators 01 Aluminium and brass rollers Angled alloy fairlead Made of anodized aluminium. Single roller bow fairlead. Nylon sheave. Bow rollers | Windlasses | Aluminium rollers | SS Code Length mm Width mm For lines up to mm For hulls up to m 01.340.00 160 60 13 6.5 Alloy fairlead with round base plate Made of anodized aluminium by Osculati. Excellent finish. Nylon sheave. Bow rollers | Windlasses | Aluminium rollers | Mooring | Sheaves | Osculati rollers Aluminium and brass rollers Code Length mm Base mm For lines up to mm 01.341.00 140 90x73 13 Triple roller bow fairlead Smooth-sliding interchangeable nylon sheaves. Chromed brass body. RollersCode For hulls Length mm Width mm Height mm 01.345.00 6 to 10 m 107 100 73 Light alloy bow roller with anchor locker kit up to 10 kg Made of anodized aluminium, fitted with locker. Suitable for anchors Danforth, Bruce, Trefoil® or CQR. Polished finish. Nylon sheaves. Bow rollers | Windlasses | Steel rollers | SS Code A mm B mm C mm L mm For anchors up to max kg 01.347.10 340 242 160 75 10 Alloy hinged bow roller up to 12 kg Made of anodized polished aluminium. Suitable for anchors Danforth, Bruce,Trefoil®, CQR and Delta. Nylon sheave. Bow rollers | Windlasses | Aluminium rollers | Code A mm B mm C mm D mm E mm L mm For anchors up to max kg 01.335.10 365 205 160 60 13 88 12 Alloy hinged bow roller up to 15 kg Made of anodized aluminium, wide overhang to prevent the anchor from touching the bow. Suitable for anchors Danforth, CQR, Trefoil®, Bruce, Delta etc. Nylon sheave. Bow rollers | Windlasses | Aluminium rollers | Code A mm B mm C mm D mm E mm L mm For anchors up to max kg 01.336.10 410 160 250 62 25 95 15 Bruce and Trefoil® anchor roller Made of anodized polished aluminium, it makes the most of the Bruce and Trefoil® anchors’ shape to provide self-locking features. When the anchor is raised it is firmly fitted into the roller to avoid manual locking interventions. Nylon sheave. Bow rollers | Windlasses | Aluminium rollers | Code A mm B mm C mm L mm For anchors 01.343.10 380 261 196 67 Bruce, Trefoil® kg 5/7.5/10
32 Anchors, rollers and compensators 01 Hawseholes E01.352.01/00 E01.352.02 E01.352.04 E01.352.03 Oval hawsehole AISI 316 Made of mirror-polished AISI 316 stainless steel. Internal threaded bushing. Hidden screws from outside. Fairleads | Triangular hawseholes | Windlasses | Code Outside mm Inside mm Trimming ring Hull thickness max mm 01.352.00 140x63 97x37 NO 17 01.352.01 140x63 97x37 NO 22 01.352.02 152x82 101x50 NO 29 01.352.03 238x136 194x89 NO 22 01.352.04 241x146 171x76 YES 54 Hawsehole for anchor line Made of chromed brass, with line passing hole and lock wing nuts. Fairleads | Windlasses Code Recess bore Ø mm Outside Ø mm Usable space Ø mm Calibrated chain max passage mm 01.351.00 128 153.5 108 8 Anchor line hawsehole with lid AISI 316 Made of mirror-polished AISI 316 stainless steel. Fairleads | Triangular hawseholes | Windlasses | Code Opening mm Ring mm Version 01.353.01 95x60 137x100 With hinge opening Roller hawsehole AISI 316 Made of mirror-polished AISI 316 stainless steel, fitted with trimming ring. The hull thickness can be cut at the required size. Fairleads | Triangular hawseholes | Windlasses | Code A mm B mm C mm D mm E mm Cut mm Hull thickness (to be cut) mm Studs mm 01.353.00 340 160 270 91 105 280x100 125 8 01.353.06 248 148 180 82 60 190x92 80 6x8 Sheaves for rollers E 01.218.82 E 01.219.94 E 01.219.95 Hard rubber spare sheave for rollers Rollers | Sheaves | Spares | Mooring Code Ø mm Width mm Bore mm For rollers 01.218.82 64 43 12 01.118.82; 01.118.83; 01.118.86; 01.118.91 01.219.94 71 74 16 01.119.94 01.219.95 78 88 16 01.119.92; 01.119.95 E 01.519.01 E 01.519.02 E 01.346.20 E 01.346.22 E 01.346.30 E 01.346.40 E 01.346.50 E 01.346.51 Spare nylon sheave for rollers Universal spare parts for bow rollers. Rollers | Sheaves | Spares | Mooring Code Ø mm Width mm Bore mm For rollers 01.519.01 86 49 13 01.419.00 (big roller) 01.519.02 61 49 13 01.419.00 (small roller) 01.346.20 69 43 10.1 01.347.10; 01.335.10; 01.336.10; 01.339.10; 01.343.10 - 01.346.22 54 49 12.5 01.333.01; 01.333.02 - 01.346.30 88 53 12.5 01.484.10 - 01.346.40 40 33.5 8.3 01.340.00; 01.341.00; 01.349.00 - 01.346.50 52 50.5 8.3 01.484.12; 01.484.13; 01.484.14 - 01.346.51 41 40 8.3 01.118.80 - Spare AISI316 stainless steel sheave for rollers Rollers | Sheaves | Mooring | SS sheaves | AISI316 Sheaves for rollers Code Ø mm Width mm Bore mm For rollers 01.346.60 88 60.5 14.2 01.336.01; 01.336.03 01.346.62 68 43.5 14.7 01.339.10 01.346.64 87 54 12.4 01.339.20; 01.341.96 01.346.66 67 43.5 12.8 01.341.99 01.346.68 67.5 43.5 10.3 01.350.01; 01.350.02 01.346.70 99 58.5 14.5 01.341.97; 01.341.98
33 Anchors, rollers and compensators 01 UNIMER mooring compensators UNIMER mooring compensator Made of salt-resistant EPDM rubber. Elastic mooring systems | Mooring Code Length mm For line Ø mm 01.495.01 332 10/12 218 01.495.02 416 12/14 448 01.495.03 520 14/18 710 01.495.04 600 20/24 1365 UNIMER U-Cleat mooring compensator with line locking mechanism Made of salt-resistant EPDM rubber. UNIMERCode Length mm For line Ø mm 01.495.11 332 10/12 218 01.495.12 416 12/16 448 01.495.13 520 16/20 710 UNIMER Classic inline mooring compensators Made of salt-resistant EPDM rubber. Elastic mooring systems | Mooring Code Length mm For line Ø mm 01.496.01 156 10/12 75 01.496.02 210 12/16 194 01.496.03 260 14/18 335 UNIMER Snubber elastic mooring system Made of polyurethane material that gives it long enduring elasticity in any weather. It is fitted directly on to the line, no matter what position. Add more Snubbers for increased compensation effect. Elastic mooring systems | Mooring Code For line Ø mm 01.155.02 14/16 2 01.155.04 18/20 2 Mooring compensators and springs AISI 316 stainless steel chain piece AISI 316 To be used for fixing stern mooring lines to stern rings or bollards in harbours. Mooring devices | Chains | Chain pieces | Code Chain Ø mm Piece length m 01.474.06 6 1 2 01.474.08 8 1.25 2 01.474.10 10 1.5 2
34 Anchors, rollers and compensators 01 Mooring spring This mooring springs ensure a non-yielding and long-lasting compensation effect. - Version made of high-strength galvanized steel. - Version made of high-strength polished stainless steel. Safety chain to be installed. Mooring springs | Elastic mooring systems | Code Version Ø mm Max length mm Thread Ø mm Max compression load For hulls up to m. (approx.) Hull max weight kg (approx.) 01.189.06 Galvanized steel 53 270 5.5 140 0.6 5 1000 01.189.09 Galvanized steel 66 320 6.5 200 0.9 7 2000 01.189.12 Galvanized steel 74 350 8 250 1.6 9 3500 01.189.17 Galvanized steel 90 380 9.5 350 2.7 11 7000 01.189.19 Galvanized steel 93 400 12 630 2.9 13 10000 01.199.06 Polished S.S. 50 270 5 95 0.4 5 1000 01.199.08 Polished S.S. 62 320 6 140 0.6 7 2000 01.199.11 Polished S.S. 69 320 7 200 0.9 9 3500 01.199.14 Polished S.S. 81 415 9 250 1.7 11 7000 01.199.16 Polished S.S. 89 390 10 450 2.3 13 10000 Polished stainless steel mooring spring High-resistant low-noise model fitted with friction inserts and stainless steel tension rods and bolts. Safety chain to be installed. Mooring springs | Elastic mooring systems | Code Outside Ø mm Length mm Wire Ø mm For boats up to m (approx.) 01.202.06 57 300 5 7 01.202.08 59 300 6 7 01.202.11 73 400 7 9 01.202.14 87 470 9 11 01.202.16 91 470 11 13/14 Variable pitch polished steel mooring spring This technology means that the load is increased progressively as the spring is pulled. The coils that are close together start working first, then the coils that are further apart begin to work as the load increases. This helps to prevent the spring violently ’bottoming out’ and becoming damaged under the sudden shock loading when this occurs. Safety chain to be installed. Mooring springs | Elastic mooring systems | Code Ø mm Length mm Lock load For hulls up to m (approx.) For hulls max kg (approx.) 01.201.02 60 250 180 0.8 10-12 7000-10000 01.201.03 70 300 350 1.6 13-14 12000-15000 DOUGLAS MARINE Master Moorings devices Thanks to the use of components (High resistance stainless and special elastomers), this product resists temperatures ranging from -40°C to +120°C and can endure more than 400,000 compressions (max compress). Weight and overall dimensions are reduced by up to 25% compared to equivalent products on the market. The Master Mooring devices deliver a gradual shock absorbing action due to the differentiated hardness of the elastomer materials. Wear-andtear resistant compression stoppers included. DOUGLAS MARINE Silenced Springs mooring device PATENT Made of specific HR stainless steel, they are equipped with anti-tension end-ofstroke and the particular heads allow a perfect axiality during traction. Mooring springs | Mooring elastic systems | Code For boats up to m Ø mm Length mm Flush Ø mm Absorbing force kg Break load kg 01.198.06 6 70 310 5 60 1370 01.198.08 8 70 350 6 100 1830 01.198.11 11 75 380 8 120 2500 01.198.14 14 90 480 9 190 3800 01.198.16 16 90 480 12 400 6200 DOUGLAS MARINE Cardan mooring device The mooring spring is fitted with cardan rotation device on articulated-head stainless steel ball bearings to prevent lines and chains from twisting and to ensure perfect axiality and parallelism of the spring operation. Mooring springs | Elastic mooring systems | Code For boats up to m Ø mm Length mm Wire Ø mm Elastic capability kg Breaking load kg 01.203.11 11 75 380 8 120 2500 01.203.14 14 90 480 9 190 3800 01.203.16 16 90 480 12 400 6200
35 Anchors, rollers and compensators 01 DOUGLAS MARINE Master Mooring Junior device PATENT Mooring compensators for 7- to 20-ton vessels. Mooring springs | Elastic mooring systems | Code For boats tons Breaking load kg Stroke mm Elasticity kg 01.207.01 7-9 2.2 15.000 120 160 01.207.02 9-13 2.3 15.000 120 250 01.207.03 13-17 2 15.000 120 450 01.207.04 17-20 2.4 20.000 120 750 E 01.208.03 DOUGLAS MARINE Master Mooring 20 PATENT Mooring compensators for 20- to 45-ton vessels. Mooring springs | Elastic mooring systems | Code For boats tons Breaking load kg Stroke mm Elasticity kg 01.208.01 20-25 3.4 27.000 90 1400 01.208.02 25-35 3.4 27.000 90 1600 01.208.03 35-45 3.4 27.000 90 2300 E 01.209.03 DOUGLAS MARINE Master Mooring 30 device PATENT Mooring compensators for 45- to 90-ton vessels. Mooring springs | Elastic mooring systems | Code For boats tons Breaking load kg Stroke mm Elasticity kg 01.209.01 45-55 3.8 27.000 140 2400 01.209.02 55-70 3.8 27.000 140 2600 01.209.03 70-90 3.8 27.000 140 2800 DOUGLAS MARINE Master Mooring GIGA device 40 PATENT Mooring compensators for 90- to 150-ton vessels. Mooring springs | Elastic mooring systems | Code For boats tons Breaking load kg Stroke mm Elasticity kg 01.210.01 90-130/150 5.2 30.000 180 3500 DOUGLAS MARINE Master Mooring GIGA 45 mooring device PATENT Mooring compensators for 150- to 350-ton vessels. Mooring springs | Elastic mooring systems | Code For boats tons Breaking load kg Stroke mm Resilience kg 01.210.02 150-350 7.8 35.000 165 4800 DOUGLAS MARINE mooring belt PATENT It avoids the major inconvenients caused by the use of chains. Extremely resistant (breaking load exceeding the one of 14-mm diameter chain), lightweight and safe because it avoids damage to the gel-coat in case of impact and does not produce rust onboard. Elastic mooring systems | Mooring Code Length m Colour Breaking load kg 01.206.00 1.10 Blue 11.800 01.206.01 1.70 Blue 11.800
www.osculati.comRkJQdWJsaXNoZXIy MjM2MTk=