1078 Accessories for inflatable boats 66 E66.447.02 “Turbo Max” Electric inflator pump for dinghies It inflates and deflates and automatically stops at set pressure. Built-in LED troubleshooting. Electric inflators | Inflators for SUPs | Inflating | Code Functions V W Flow rate l/min Max pressure Current draw A mm Tube 66.447.00 Inflation+ deflation 12 540/720 1000 250 mbar (3.6 PSI) 45/60 310x180 x190 66.447.02 Optional 66.448.00 Inflation+ deflation 24 700/800 1000 250 mbar (3.6 PSI) 23/26 310x180 x190 - Included 66.447.02 25-mm Ø tube. 25-m roll. OPTIONAL. E66.447.01 - 66.448.01 E66.447.01 - 66.448.01 E66.447.03 BRAVO Turbo Max Kit electric inflator for dinghies Fixed version, for recess mounting. Ideal for installation on the console of the dinghy or near the tender garage. Inflator/deflator. Automatic stop at the set pressure. Electric inflators | Inflators for SUPs | Inflating | Code Functions V W Flow rate l/min Pressure Current draw A mm OPTIONAL watertight case OPTIONAL hose 66.447.01 Inflation+ deflation 12 540/720 1000 250 mbar (3.6 PSI) 45/60 330x210 x230 66.447.03 66.447.02 66.448.01 Inflation+ deflation 24 525/930 1000 250 mbar (3.6 PSI) 25/30 330x210 x230 66.447.03 66.447.02 66.447.03 Watertight case with clear lid for mounting flush with the steering console. Dimensions: 345x220x18 mm. Depth: 130 mm. OPTIONAL. 66.447.02 25-mm Ø tube. 25-m roll. OPTIONAL. E66.447.02 High-pressure electric inflater with GE 22 RC remote-controlled compressor It consists of a pumping unit to be located in a protected housing and a control panel that can be positioned in a different place depending on your boat (tender garage, stern gangplank, boat deck). The 5-m long hose and cables connecting the pump to the panel are included. The function (inflation/deflation) and the pressure needed can be selected on the control panel, where the inflating mouth is located. Connect one end of the inflation hose to the control panel and the other end to the dinghy and press ON to start the pump. The remote-controlled pump drastically reduces noise during operation. High-performance pump for fast and high-pressure inflation. For dinghies, ribs, SUPs, etc. Electric inflaters | Inflaters for SUP | Inflation | Code Function V Current draw A Flow rate / Pressure Pump mm Control panel mm 4-m hose w/ connections OPTIONAL Motor 1 Motor 2 66.447.05 Inflation + deflation 12 30 250 l/min up to 0.2 bar 120 l/min up to 1.4 bar (20 PSI) 370x170x 152 151x90x5 1 66.447.07 E5-m hose included to connect pump to control panel E66.447.07 GE OV6 e GE OV10 electrical inflator High-performance model able to inflate any dinghy or inflatable structure very rapidly. Electric inflators | Inflating | Deflating Code Functions V W Flow l/min Max pressure Current draw A mm Sand filter 66.446.90 Infaltion + deflation 220 600 1600 175 mbar (2.5 PSI) 2.7 150x160x 170 no 66.446.91 Infaltion + deflation 220 1000 1700 250 mbar (3.6 PSI) 4.5 150x160x 170 yes
RkJQdWJsaXNoZXIy MjM2MTk=