620 Gas springs, stainless steel hardware 38 Powered Stays E38.376.01/02 E38.376.06 LENCO linear powered stay Linear stay thrust: 225 kg. 60-cm cable with Deutsch plug. Extension cables available (51.259.xx). Stainless steel quick release plug. It can work in pairs (use switch 38.376.02). 100% rustproof parts. Friction system to prevent end-of-stroke burning (extended and retracted). Current draw: 10A (12V), 5A (24V). LENCOCode Lenco code Model V Total length when retracted (bracket to bracket) mm Stroke mm Total length when extended mm 38.374.64 20764-001 HL-800S 12 508 204 712 38.374.66 20766-001 HL-800 12 610 204 813 38.374.68 20768-001 HL-1200S 12 610 305 915 38.374.70* 20770-001 HL-1200 12 737 305 1042 38.374.74* 20774-001 HL-1600S 12 737 407 1143 38.374.76 20776-001 HL-1600 12 839 407 1245 38.374.78 20778-001 HL-2000S 12 839 508 1347 38.374.80 20780-001 HL-2000 12 940 508 1448 38.374.82 20782-001 HL-2400S 12 940 610 1550 38.374.84* 20784-001 HL-2400 12 1042 610 1651 38.374.86* 20786-001 HL-2600 12 1194 661 1855 38.375.65 20765-001 HL-800S/24V 24 508 204 712 38.375.69 20769-001 HL-1200S/24V 24 610 305 915 38.375.79* 20779-001 HL-2000S/24V 24 839 508 1347 38.375.83 20783-001 HL-2400S/24V 24 940 610 1550 38.375.87 20787-001 HL-2600S/24V 24 1194 661 1855 * Available only upon order 38.376.01 Switch for single jacks. 38.376.02 Switch to operate two actuators at the same time 38.376.06 OPTIONAL Bracket for emergency opening in case of current failure. The housing can be lifted by 12.7 cm and the lock plug can be pulled out. Powered stay for hatches type AV, designed for heavy loads Body Ø 48 mm, maximum thrust for a single actuator: 120 kg; manual emergency opening, electronic system, if mounted in pairs or a higher number it balances the engine cycles to provide a synchronous lift, speed 17 mm/sec. Aluminium body and stainless steel telescopic stem, water resistant IP65; total or partial hatch opening in all desired positions. Stay | Powered hatch stay | Hatch stay Code Single type Double type Travel mm Thrust kg Closed length mm volt Amp absorption 38.370.12 x - 300 120 677 12 10 38.370.13 x - 300 120 677 24 5 38.370.14 x - 450 120 827 12 10 38.370.15 x - 600 120 977 12 10 38.370.21 x - 450 120 827 24 5 38.370.16 x - 600 120 977 24 5 38.370.17 - x 450 240 827 12 20 38.370.18 - x 600 240 977 12 20 38.370.19 - x 450 240 827 24 10 38.370.20 - x 600 240 977 24 10 38.370.10/11 OPTIONAL relay box Powered stay for hatches type model Ulysses designed for light loads Electrical linear single mounting stay, 34-mm Ø body, 65-kg maximum thrust, absorption 2 A at 12 V, speed 4 mm/sec at 12 V, 6 mm/sec at 24 V. Fitted with aluminium body and stainless steel telescopic stem, water resistant IP65. Total or partial hatch opening in all desired positions. They cannot be mounted in pairs. Hatch stays | Powered hatch stays Code Travel mm Thrust kg Closed length mm volt 38.370.40 180 65 515 12 38.370.41 180 65 515 24 38.370.43 300 65 635 12 38.370.44 300 65 635 24 Relay boxes enable cycle inversion and synchronization ActuatorsCode Version 38.370.10 12 V (RB 12) 38.370.11 24 V (RB 24) For switches with "O" in the middle and spring return, see the various models available on group 14 of this catalogue.
RkJQdWJsaXNoZXIy MjM2MTk=