83 Skylla-TG 24/30 90-265 VAC 24/50 90-265 VAC 24/100-G 90-265 VAC Input voltage (V AC) 120 / 230 120 / 230 120 / 230 Input voltage range (V AC) 90-265 90-265 90-265 Input voltage range (V DC) 90-400 90-400 90-400 Frequency (Hz) 45-65 Hz or DC Power factor 1 Charge voltage 'absorption' (V DC) 28,5 28,5 28,5 Charge voltage 'float' (V DC) 26,5 26,5 26,5 Charge current house batt. (A) (2) 30 50 100 Charge current starter batt. (A) 4 4 4 Charge characteristic IUoUo (three step) Battery capacity (Ah) 150-300 250-500 500-1000 Temperature sensor √ Can be used as power supply √ Remote alarm Potential free contacts 60V / 1A (1x NO and 1x NC) Forced cooling √ Protection (1) a, b, c, d Operating temp. range -40 to +50°C (-40 - 122°F) (Full output current up to 40°C) Humidity (non-condensing) max 95% ENCLOSURE Material & Colour aluminium (blue RAL 5012) Battery-connection M8 studs 230 V AC-connection screw-clamp 2,5 mm² (AWG 6) Protection category IP 21 Weight kg (lbs) 5,5 (12.1) 5,5 (12.1) 10 (22) Dimensions hxwxd in mm (hxwxd in inches) 365 x 250 x 147 (14.4 x 9.9 x 5.8) 365 x 250 x 147 (14.4 x 9.9 x 5.8) 365 x 250 x 257 (14.4 x 9.9 x 10.1) STANDARDS Vibration 0,7g (IEC 60945) Safety EN 60335-1, EN 60335-2-29, IEC 60945 Emission EN 55014-1, EN 61000-3-2, IEC 60945 Immunity EN 55014-2, EN 61000-3-3, IEC 60945 Germanischer Lloyd Certificate 54 758 – 08HH 1) Protection key: a) Output short circuit b) Battery reverse polarity detection c) Battery voltage too high d) Temperature too high 2) Up to 40°C (100°F) ambient BMV-700 Battery Monitor The BMV-700 Battery Monitor features an advanced microprocessor control system combined with high resolution measuring systems for battery voltage and charge/discharge current. Besides this, the software includes complex calculation algorithms, like Peukert’s formula, to exactly determine the state of charge of the battery. The BMV-700 selectively displays battery voltage, current, consumed Ah or time to go. Skylla Control The Skylla Control allows you to alter the charge current and see the system status. Altering the charge current is useful if the shore power fuse is limited: the AC current drawn by the battery charger can be controlled by limiting the maximum output current, thereby preventing the shore power fuse from blowing. Charger Switch A remote on-off switch Battery Alarm An excessively high or low battery voltage is indicated by an audible and visual alarm.
RkJQdWJsaXNoZXIy MjM2MTk=