79 Victron Energy B.V. | De Paal 35 | 1351 JG Almere | The Netherlands E-mail: sales@victronenergy.com www.victronenergy.com Skylla-i 24/80 (1+1) 24/80 (3) 24/100 (1+1) 24/100 (3) Input voltage (VAC) 230V Input voltage range (VAC) 185-265V Input voltage range (VDC) 180-350V Maximum AC input current @ 180 VAC 16A 20A Frequency (Hz) 45-65Hz Power factor 0,98 Charge voltage 'absorption' (VDC) (1) 28,8V Charge voltage 'float' (VDC) 27,6V Charge voltage ‘storage’ (VDC) 26,4V Charge current (A) (2) 80A 3 x 80A (max total output: 80A) 100A 3 x 100A (max total output: 100A) Charge current starter batt. (A) 4A n. a. 4 n. a. Charge algorithm 7 stage adaptive Battery capacity (Ah) 400-800Ah 500-1000Ah Charge algorithm, Li-Ion 3 stage, with on-off control or CAN bus control Temperature sensor Yes Can be used as power supply Yes Remote on-off port Yes (can be connected to a Li-Ion BMS) VE.Can communication port Two RJ45 connectors, NMEA2000 protocol, galvanically isolated. Integrated 12V CAN-bus power supply, 30V DC maximum (3) Synchronised parallel operation Yes, with VE.Can Alarm relay DPST AC rating: 240VAC/4A DC rating: 4A up to 35VDC, 1A up to 60VDC Forced cooling Yes Protection Battery reverse polarity (fuse) Output short circuit Over temperature Operating temp. range -20 to 60°C (Full output current up to 40°C) Humidity (non-condensing) max 95% ENCLOSURE Material & Colour aluminium (blue RAL 5012) Battery-connection M8 bolts 230 VAC-connection screw-clamp 10mm² (AWG 7) Protection category IP 21 Weight kg (lbs) 7kg (16 lbs) Dimensions hxwxd in mm (hxwxd in inches) 405 x 250 x 150 (16.0 x 9.9 x 5.9) STANDARDS Safety EN 60335-1, EN 60335-2-29 Emission EN 55014-1, EN 61000-6-3, EN 61000-3-2 Immunity EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3 1) Output voltage range 20-36V. Can be set with rotary switch or potentiometers. 2) Up to 40°C (100°F) ambient. Output will reduce to 80% at 50°C, and to 60% at 60°C. 3) When connecting the Skylla-i in a VE.Can network that also contains devices connected to a 48V battery bank, make sure to use a special RJ-45 cable, which has pins 2 and 6 (NET-S / V+) not connected. BMV-700 Battery Monitor The BMV-700 Battery Monitor features an advanced microprocessor control system combined with high resolution measuring systems for battery voltage and charge/discharge current. The software includes complex calculation algorithms, like Peukert’s formula, to exactly determine the state of charge of the battery. The BMV-700 selectively displays battery voltage, battery current, consumed Ah or time to go. Skylla-i Control The Skylla-i Control panel provides remote control and monitoring of the charge process with LED status indication. In addition, the remote panel also offers input current adjustment that can be used to limit the input current and thus the power drawn from the AC supply. This is particularly useful when operating the charger from limited shore power or small gensets. The panel can also be used to change several battery charging parameters. Several control panels can be connected to one charger or to a set of synchronised and parallel connected chargers.
RkJQdWJsaXNoZXIy MjM2MTk=