77 Skylla-IP65 12/70 (1+1) 12/70 (3) 24/35 (1+1) 24/35 (3) Input voltage (VAC) 120/230V Input voltage range (VAC) 90-265V Maximum AC input current @ 100 VAC 12A Frequency 45-65Hz Power factor 0,98 Charge voltage 'absorption' (1) 14,4 V 28,8V Charge voltage 'float' 13,8 V 27,6V Charge voltage ‘storage’ 13,2 V 26,4V Charge current (2) 70A 3x 70A (max total output: 70 A) 35A 3 x 35A (max total output: 35 A) Charge current starter batt. (A) 3 A n. a. 3 A n. a. Charge algorithm 7 stage adaptive Battery capacity 350-700Ah 150-350Ah Charge algorithm, Li-Ion 3 stage, with on-off control or CAN-bus control Temperature sensor Yes Can be used as power supply Yes Remote on-off port Yes (can be connected to a Li-Ion BMS) CAN-bus communication port (VE.Can) Two RJ45 connectors, NMEA2000 protocol, not isolated Synchronised parallel operation Yes, with VE.Can Alarm relay DPST AC rating: 240 VAC/4 A DC rating: 4 A up to 35 VDC, 1 A up to 60 VDC Forced cooling Yes (internal air circulation) Protection Battery reverse polarity (fuse) Output short circuit Over temperature Operating temp. range -20 to 60 °C (Full output current up to 40 °C) Humidity (non-condensing) max 95 % ENCLOSURE Material & Colour steel (blue RAL 5012) Battery-connection M6bolts 230 VAC-connection screw-clamp 6mm² (AWG 10) Protection category IP65 Weight 6kg (14lbs) Dimensions (hxwxd) 401 x 265 x 151 mm 16 x 10,5 x 6 inch STANDARDS Safety EN 60335-1, EN 60335-2-29 Emission EN 55014-1, EN 61000-6-3, EN 61000-3-2 Immunity EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3 1) Output voltage range 10-16 V resp. 20-32 V. 2) Up to 40 °C (100°F) ambient. Output will reduce to 60 % at 50 °C, and to 40 % at 60 °C. SmartShunt or BMV-712 Smart Battery Monitor Use a smartphone or other Bluetooth enabled device to: - customize settings, - monitor all important data on single screen, - view historical data, and to - update the software when new features become available. Skylla-i Control The Skylla-i Control panel provides remote control and monitoring of the charge process with LED status indication. In addition, the remote panel also offers input current adjustment that can be used to limit the input current and thus the power drawn from the AC supply. This is particularly useful when operating the charger from limited shore power or small gensets. Several control panels can be connected to one charger or to a set of synchronised and parallel connected chargers.
RkJQdWJsaXNoZXIy MjM2MTk=