??????? BATTERY MANAGEMENT SYSTEM (BMS) OVERVIEW www.victronenergy.com Feature highlights common to all models: • Specifically designed for use with our Lithium Smart Battery 12,8 V & 25,6 V range. • Communicates directly with the lithium battery via the battery’s M8 circular connector cables. • Protects the lithium battery cells from overvoltage, undervoltage or a too low or high temperature by turning off loads or charge sources via its “load disconnect” and “charge disconnect“ terminals. • The maximum number of batteries that can be connected to the BMS is 20. System Voltages: • The SmallBMS, VE.Bus BMS V2 and the Lynx Smart BMS can connect to a 12, 24 or 48 V system. • The other BMS models can only connect to a 12 V system. System connection: • The SmallBMS and VE.Bus BMS V2 require that all loads and charge sources are directly connected to the battery. The BMS turns them off in case of a battery cell voltage or temperature alarm via the “load disconnect” and “charge disconnect“ terminals. • The Lynx Smart BMS has a safety DC contactor (500 A or 1000 A, depending on model). It disconnects the system from the battery or battery bank in case of a battery cell voltage or temperature alarm and can be used as a main system on/off switch. • The Smart BMS 12/200 has a dedicated system output to which both, loads and chargers, can be connected. The system output will disconnect in case of a battery cell voltage or temperature alarm. Alternator: • The Smart BMS CL 12/100 and Smart BMS 12/200 have a dedicated alternator input. This input will activate when the alternator is running, and the starter battery has reached a sufficient voltage. It will current limit the alternator supply and block reverse current from the lithium battery into the starter battery. It disconnects in case of a battery cell voltage or temperature alarm. • The Lynx Smart BMS has an alternator ATC mode, so additional alternator protection is not needed. Pre-alarm options: • All models have a pre-alarm output. Remote on/off options: • All models have a “remote on/off” terminal. • The “Smart” BMS models can also be turned on and off via Bluetooth and the VictronConnect app. Bluetooth and the VictronConnect app • All “Smart” BMS models are equipped with Bluetooth and can be monitored, operated, and configured via the VictronConnect app. They all support Instant Readout to display key data at a glance without the need for a paired connection to the BMS. Battery monitor • The Lynx Smart BMS has a full-featured built-in battery monitor. Communication options: • The VE Bus BMS V2 can directly control a VE.Bus inverter or inverter/charger in case of a battery cell undervoltage, overvoltage or temperature alarm. • The VE.Bus BMS V2 and Lynx Smart BMS can be used for communication or control via a GX device and can control compatible inverter/chargers and solar chargers via DVCC control without the need to use the load and/or charger disconnect terminals. • The Lynx Smart BMS can monitor up to 4 Lynx distributor modules. Optional accessories: • The VictronConnect app (free download) for “Smart” BMS modules. • Pair of M8 circular connector 3 pole cables, to extend the battery BMS cables. • Cable for Smart BMS CL 12/100 to MultiPlus. • VE.Direct non inverting remote on/off cable. • Inverting remote on-off cable. • Non inverting remote on-off cable. System design recommendations: • The SmallBMS for 12, 24 or 48 V systems without inverter/chargers. • The VE.Bus BMS V2 for 12, 24 or 48 V systems with inverter/chargers and a GX device • The Lynx Smart BMS for 12, 24 or 48 V systems with digital integration and with the need to have a safety relay to disconnect DC loads and/or inverters or inverter/chargers, like is the case in yachts or recreational vehicles. • Available in two different versions: 500 A (M8 busbar) and 1000 A (M10 busbar). • The Smart BMS CL 12/100 for 12 V systems with an alternator. • The Smart BMS 12/200 for 12 V systems with an alternator and DC loads and an inverter or inverter/charger. Battery Management System (BMS) Overview Smart BMS CL 12/100 Smart BMS 12/200 Lynx Smart BMS 500 A SmallBMS with pre-alarm VE.Bus BMS V2 Lynx Smart BMS 1000 A
RkJQdWJsaXNoZXIy MjM2MTk=