119 Victron Energy B.V. | De Paal 35 | 1351 JG Almere | The Netherlands E-mail: sales@victronenergy.com | www.victronenergy.com Battery Monitor BMV-712 Smart Supply voltage range 6.5 - 70 VDC Current draw, back light off < 1 mA Input voltage range, auxiliary battery 6.5 - 70 VDC Battery capacity (Ah) 1 - 9999 Ah Operating temperature range -40 +50°C (-40–120°F) Measures voltage of second battery, or temperature, or midpoint Yes Temperature measurement range -20 +50°C VE.Direct communication port Yes Bistable relay 60V / 1A normally open (function can be inverted) RESOLUTION & ACCURACY (with a 500 A shunt) Current ± 0.01 A Voltage ± 0.01 V Amp hours ± 0.1 Ah State of charge (0 – 100%) ± 0.1 % Time to go ± 1 min Temperature (0 - 50°C or 30 - 120°F) ± 1°C/°F Accuracy of current measurement ± 0.4 % Accuracy of voltage measurement ± 0.3 % INSTALLATION & DIMENSIONS Installation Flush mount Front 63mm diameter Front bezel 69 x 69mm (2.7 x 2.7 inch) Shunt connections bolts M10 (0.3937 inch) Body diameter and depth 52 mm (2.0 inch) and 31 mm (1.2 inch) Protection category IP55 (not intended for outdoor use) STANDARDS Safety EN 60335-1 Emission / Immunity EN 55014-1 / EN 55014-2 Automotive ECE R10-4 / EN 50498 ACCESSORIES Shunt (included) 500 A / 50 mV Cables (included) 10 meter 6 core UTP with RJ12 connectors, and cable with 1Amp slow blow fuse for ‘+’ connection Temperature sensor Optional (ASS000100000) STORED TRENDS Data stored Battery voltage, Current, State of Charge % as well as the Aux input (Battery temperature, or midpoint deviation, or starter battery voltage). Number of days trends data is stored 46 Color Control The powerful Linux computer, hidden behind the colour display and buttons, collects data from all Victron equipment and shows it on the display. Besides communicating with Victron equipment, the Color Control communicates through CAN bus (NMEA 2000), Ethernet and USB. Data can be stored and analysed on the VRM Portal. 1000A/50 mV, 2000 A/50 mV and 6000 A/50 mV shunt The quick connect PCB on the standard 500 A/50 mV shunt can also be mounted on these shunts. Interface cables - VE.Direct cables to connect a BMV 712 to the Color Control (ASS030530xxx) - VE.Direct to USB interface (ASS030530000) to connect several BMV 70x to a Color Control GX or to a computer. A maximum of four BMVs can be connected directly to a Color Control GX. Even more BMVs can be connected to a USB Hub for central monitoring. Battery Balancer (BMS012201000) The Battery Balancer equalizes the state of charge of two series connected 12V batteries, or of several parallel strings of series connected batteries. When the charge voltage of a 24 V battery system increases to more than 27 V, the Battery Balancer will turn on and compare the voltage over the two series connected batteries. The Battery Balancer will draw a current of up to 1A from the battery (or parallel connected batteries) with the highest voltage. The resulting charge current differential will ensure that all batteries will converge to the same state of charge. If needed, several balancers can be paralleled. A 48 V battery bank can be balanced with three Battery Balancers. Venus GX The Venus GX provides intuitive control and monitoring. It has the same functionality as the Color Control GX, with a few extras: - lower cost, mainly because it has no display or buttons - 3 tank sender inputs - 2 temperature inputs Temperature sensor
RkJQdWJsaXNoZXIy MjM2MTk=