117 Victron Energy B.V. | De Paal 35 | 1351 JG Almere | The Netherlands General phone: +31 (0)36 535 97 00 | E-mail: sales@victronenergy.com Battery Monitor BMV-700 BMV-702 BMV-702 BLACK BMV-700H Supply voltage range 6.5 - 95 VDC 6.5 - 95 VDC 60 – 385 VDC Current draw, back light off < 4mA < 4mA < 4mA Input voltage range, auxiliary battery n. a. 6.5 - 95 VDC n. a. Battery capacity (Ah) 1 - 9999 Ah Operating temperature range -40 +50°C (-40-120°F) Measures voltage of second battery, or temperature, or midpoint No Yes No Temperature measurement range -20 +50°C n. a. VE.Direct communication port Yes Yes Yes Relay 60V / 1A normally open (function can be inverted) RESOLUTION & ACCURACY (with a 500 A shunt) Current ± 0.01A Voltage ± 0.01V Amp hours ± 0.1 Ah State of charge (0 – 100%) ± 0.1% Time to go ± 1 min Temperature (0 - 50°C or 30 - 120°F) n. a. ± 1°C/°F n. a. Accuracy of current measurement ± 0.4% Accuracy of voltage measurement ± 0.3% INSTALLATION & DIMENSIONS Installation Flush mount Front 63mm diameter Front bezel 69 x 69 mm (2.7 x 2.7 inch) Shunt connection bolts M10 (0.3937 inch) Body diameter and depth 52 mm (2.0 inch) and 31 mm (1.2 inch) Protection category IP55 (not intended for outdoor use) STANDARDS Safety EN 60335-1 Emission / Immunity EN 55014-1 / EN 55014-2 Automotive ECE R10-4 / EN 50498 ACCESSORIES Shunt (included) 500A / 50mV Cables (included) 10 meter 6 core UTP with RJ12 connectors, and cable with 1Amp slow blow fuse for ‘+’ connection Temperature sensor Optional (ASS000100000) Color Control The powerful Linux computer, hidden behind the colour display and buttons, collects data from all Victron equipment and shows it on the display. Besides communicating with Victron equipment, the Color Control communicates through CAN bus (NMEA2000), Ethernet and USB. Data can be stored and analysed on the VRM Portal. 1000A/50mV, 2000A/50mV and 6000A/50mV shunt The quick connect PCB on the standard 500A/50mV shunt can also be mounted on these shunts. Interface cables - VE.Direct cables to connect a BMV 70x to the Color Control (ASS030530xxx) - VE.Direct to USB interface (ASS030530000) to connect several BMV 70x to a Color Control GX or to a computer. A maximum of four BMVs can be connected directly to a Color Control GX. Even more BMVs can be connected to a USB Hub for central monitoring. Battery Balancer (BMS012201000) The Battery Balancer equalizes the state of charge of two series connected 12V batteries, or of several parallel strings of series connected batteries. When the charge voltage of a 24V battery system increases to more than 27V, the Battery Balancer will turn on and compare the voltage over the two series connected batteries. The Battery Balancer will draw a current of up to 1A from the battery (or parallel connected batteries) with the highest voltage. The resulting charge current differential will ensure that all batteries will converge to the same state of charge. If needed, several balancers can be paralleled. A 48V battery bank can be balanced with three Battery Balancers. With the VE.Direct to Bluetooth Smart dongle real time data and alarms can be displayed on Apple and Android smartphones, tablets, macbooks and other devices. Also use your smartphone to adjust settings! (the VE.Direct to Bluetooth Smart dongle must be ordered separately) Temperature sensor See the VictronConnect BMV app Discovery Sheet for more screenshots
RkJQdWJsaXNoZXIy MjM2MTk=