Victron-Energy

93 Energy. Anytime. Anywhere. www.victronenergy.com Victron Energy B.V. | De Paal 35 | 1351 JG Almere | The Netherlands General phone: +31 (0)36 535 97 00 | E-mail: sales@victronenergy.com www.victronenergy.com Lithium HE battery 24V / 100Ah 24V / 200Ah Technology Lithium-Ion NMC Lithium-Ion NMC Cell configuration 7S32P 7S64P Nominal voltage 25,2 V 25,2 V Nominal capacity 100 Ah 200 Ah Nominal energy 2,5 kWh 5,0 kWh Cycle Life @80% DoD (0,3C) 2000 2000 Energy/weight ratio (incl. BMS and enclosure) 159 Wh/kg 175 Wh/kg Weight (incl. BMS and enclosure) 15,7 kg 28,6 kg Discharge Discharge cut-off voltage 21 V 21 V Recommended discharge current 30 A (0.3 C) 60 A (0.3 C) Maximum discharge current (10 minutes) 150 A (1.5 C) 300 A (1.5 C) Fuses 150 A, fuse inside 300 A, fuse inside Charge Absorption voltage (1 hour) 28,4 V 28,4 V Float voltage 27,5 V 27,5 V Maximum charge current 100 A (1 C) 200 A (1 C) Recommended charge current 30 A (0.3 C) 60 A (0.3 C) Configuration Series configuration Yes, up to 2 Parallel configuration Yes, up to 96 Temperature Operating temp. charge 0~45°C Operating temp. discharge -20~55°C Storage temp. -20~45°C Mechanical Power connections M8 stud, Max. 15 Nm M8 stud, Max. 15 Nm Protection class IP20 IP20 Cooling Air, active (1x fan inside) Air, active (2x fan inside) Dimensions (l x w x h) 362 x 193 x 214 mm 362 x 193 x 355 mm Safety Battery Management System (BMS) Integrated slave BMS Balancing Passive Compatible BMS master controller Lynx Ion BMS Communication with Lynx Ion BMS CAN bus Standards EMC: Emission EN-IEC 61000-6-3 EMC: Immunity EN-IEC 61000-6-1 Low voltage directive EN 60335-1 Lynx Ion BMS intended for both 100 Ah & 200Ah batteries 400A 1000A Maximum number batteries in series 2 (= 48 VDC) Maximum number batteries in parallel 96 (48 V: 48 strings of two batteries Supply voltage range 18 to 58 VDC Power consumption, standby mode 73 mW @ 26,2V and 138 mW @ 52,4V Power consumption, active mode 8,7 W Main safety contactor 400A 1000A Communication port VE.CAN (NMEA2000, RJ45 connection, galvanically isolated) IO Auxiliary output 13,5 V / 1 A, short circuit protected Allow-to-charge (switched voltage) 13,5 V / 1 A, short circuit protected Allow-to-discharge (switched voltage) 13,5 V / 1 A, short circuit protected Allow-to-charge (relay output) 1 A @ 60 VDC, potential free Allow-to-discharge (relay output) 1 A @ 60 VDC, potential free Programmable contact (relay output) 1 A @ 60 VDC, potential free External status signal 13,5 V / 140 mA Enclosure Material ABS Weight 4,6 kg 5,7 kg Dimensions (lxwxh) 225 x 426 x 117 mm Environmental Operating temperature range -20 °C to 50 °C Humidity Max. 95% (non-condensing) Protection class IP22 Standards EMC: Emission EN-IEC 61000-6-3 EMC: Immunity EN-IEC 61000-6-1 Low voltage directive EN 60335-1