Victron-Energy

91 Energy. Anytime. Anywhere. www.victronenergy.com Victron Energy B.V. | De Paal 35 | 1351 JG Almere | The Netherlands General phone: +31 (0)36 535 97 00 | Fax: +31 (0)36 535 97 40 E-mail: sales@victronenergy.com | www.victronenergy.com Lithium-Ion battery specifications Lithium-ion 24V 100Ah 2.6kWh battery Lithium-ion 24V 180Ah 4.75kWh battery Technology Lithium iron phosphate (LiFePo4) Lithium iron phosphate (LiFePo4) Nominal voltage 25,6V 25,6V Nominal capacity 100Ah 180Ah Nominal power 2,6kWh 4,75kWh Weight 30kg 55kg Power/Weight ratio 86Wh/kg 86Wh/kg Dimensions (lxwxh) 592x154x278mm 623x193x351mm Charge/Discharge Charge cut-off voltage at 0.05C 28,8V 28,8V Discharge cut-off voltage 20V 20V Recommended charge/discharge current 30A (0,3C) 54A (0,3C) Maximum charge current (1C) 100A 180A Maximum discharge current (1.5C) 150A 270A Pulse discharge current (10s) 500A 1000A Cycle Life @80% DOD (0.3C) 3000 3000 Configuration Series configuration Yes, up to 2 (more in series on request) Yes, up to 2 (more in series on request) Parallel configuration Yes, easy up to 10 (more parallel on request) Yes, easy up to 10 (more parallel on request) Environmental Operating temp. charge 0~45°C 0~45°C Operating temp. discharge -20~55°C -20~55°C Storage temp. -20~45°C -20~45°C Standards EMC: Emission EN-IEC 61000-6-3:2007/A1:2011/C11:2012 EMC: Immunity EN-IEC 61000-6-1:2007 Low voltage directive EN 60335-1:2012/AC:2014 Lynx Ion + Shunt specifications Lynx Ion + Shunt 350A 600A Maximum number batteries in series 2 (= 48 VDC) Maximum number batteries in parallel 48 Supply voltage range 9 ... 60VDC Standby mode 73mW @ 26,2V and 138mW @ 52,4V Active mode 8,7 W Main safety contactor 350A 600A Enclosure Material ABS Weight 2,0kg Dimensions (lxwxh) 185 x 165 x 85 mm IO Aux. output 5A (output voltage = battery voltage), short circuit protection External safety contactor 5A (output voltage = battery voltage), short circuit protection Allow-to-charge 1A @ 60VDC, potential free Allow-to-discharge 1A @ 60VDC, potential free External status signal 12V / 140mA Environmental Operating temperature range -20 °C to 50 °C Humidity Max. 95% (non-condensing) Protection class IP22 IP20 Standards EMC: Emission EN-IEC 61000-6-3:2007/A1:2011/C11:2012 EMC: Immunity EN-IEC 61000-6-1:2007 Low voltage directive EN 60335-1:2012/AC:2014 RoHs EN 50581:2012