Victron-Energy

29 Energy. Anytime. Anywhere. Victron Energy B.V. | De Paal 35 | 1351 JG Almere | The Netherlands General phone: +31 (0)36 535 97 00 | Fax: +31 (0)36 535 97 40 MultiPlus 12 Volt 24 Volt 48 Volt C 12/800/35 C 24/ 800/16 C 12/1200/50 C 24/1200/25 C 12/1600/70 C 24/1600/40 C 12/2000/80 C 24/2000/50 12/3000/120 24/3000/70 48/3000/35 24/5000/120 48/5000/70 PowerControl Yes Yes Yes Yes Yes Yes PowerAssist Yes Yes Yes Yes Yes Yes Transfer switch (A) 16 16 16 30 16 or 50 100 INVERTER Input voltage range (V DC) 9,5 – 17 V 19 – 33 V 38 – 66 V Output Output voltage: 230 VAC ± 2% Frequency : 50 Hz ± 0,1% (1) Cont. output power at 25°C (VA) (3) 800 1200 1600 2000 3000 5000 Cont. output power at 25°C (W) 700 1000 1300 1600 2400 4000 Cont. output power at 40°C (W) 650 900 1200 1400 2200 3700 Cont. output power at 65°C (W) 400 600 800 1000 1700 3000 Peak power (W) 1600 2400 3000 4000 6000 10.000 Maximum efficiency (%) 92 / 94 93 / 94 93 / 94 93 / 94 93 / 94 / 95 94 / 95 Zero load power (W) 8 / 10 8 / 10 8 / 10 9 / 11 20 / 20 / 25 30 / 35 Zero load power in AES mode (W) 5 / 8 5 / 8 5 / 8 7 / 9 15 / 15 / 20 25 / 30 Zero load power in Search mode (W) 2 / 3 2 / 3 2 / 3 3 / 4 8 / 10 / 12 10 / 15 CHARGER AC Input Input voltage range: 187-265 VAC Input frequency: 45 – 65 Hz Power factor: 1 Charge voltage 'absorption' (V DC) 14,4 / 28,8 / 57,6 Charge voltage 'float' (V DC) 13,8 / 27,6 / 55,2 Storage mode (V DC) 13,2 / 26,4 / 52,8 Charge current house battery (A) (4) 35 / 16 50 / 25 70 / 40 80 / 50 120 / 70 / 35 120 / 70 Charge current starter battery (A) 4 (12 V and 24 V models only) Battery temperature sensor yes GENERAL Auxiliary output (5) n. a. n. a. n. a. n. a. Yes (16A) Yes (50A) Programmable relay ( 6) Yes Protection (2) a - g VE.Bus communication port For parallel and three phase operation, remote monitoring and system integration General purpose com. port n. a. n. a. n. a. n. a. Yes Yes Remote on-off Yes Common Characteristics Operating temp. range: -40 to +65°C (fan assisted cooling) Humidity (non-condensing): max 95% ENCLOSURE Common Characteristics Material & Colour: aluminium (blue RAL 5012) Protection category: IP 21 Battery-connection battery cables of 1.5 meter M8 bolts Four M8 bolts (2 plus and 2 minus connections) 230 V AC-connection G-ST18i connector Spring-clamp Screw terminals 13 mm 2 (6 AWG) M6 bolts Weight (kg) 10 10 10 12 18 30 Dimensions (hxwxd in mm) 375x214x110 520x255x125 362x258x218 444x328x240 STANDARDS Safety EN-IEC 60335-1, EN-IEC 60335-2-29, IEC 62109-1 Emission, Immunity EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3 Road vehicles 12V and 24V models: ECE R10-4 Anti-islanding See our website 1) Can be adjusted to 60 HZ; 120 V 60 Hz on request 2) Protection key: a) output short circuit b) overload c) battery voltage too high d) battery voltage too low e) temperature too high f) 230 VAC on inverter output g) input voltage ripple too high 3) Non-linear load, crest factor 3:1 4) At 25˚C ambient 5) Switches off when no external AC source available 6) Programmable relay that can a.o. be set for general alarm, DC under voltage or genset start/stop function AC rating: 230 V/4A DC rating: 4 A up to 35 VDC, 1 A up to 60 VDC Computer controlled operation and monitoring Several interfaces are available: Digital Multi Control Panel A convenient and low cost solution for remote monitoring, with a rotary knob to set PowerControl and PowerAssist levels. Blue Power Panel Connects to a Multi or Quattro and all VE.Net devices, in particular the VE.Net Battery Controller. Graphic display of currents and voltages. BMV-700 Battery Monitor The BMV-700 Battery Monitor features an advanced microprocessor control system combined with high resolution measuring systems for battery voltage and charge/discharge current. Besides this, the software includes complex calculation algorithms, like Peukert’s formula, to exactly determine the state of charge of the battery. The BMV-700 selectively displays battery voltage, current, consumed Ah or time to go. The monitor also stores a host of data regarding performance and use of the battery. Several models available (see battery monitor documentation). Color Control GX Provides monitor and control. Locally, and also remotely on the VRM Portal. MK3-USB VE.Bus to USB interface Connects to a USB port (see ‘A guide to VEConfigure’ ) VE.Bus to NMEA 2000 interface Connects the device to a NMEA2000 marine electronics network. See the NMEA2000 & MFD integration guide