Victron

Marine systems System examples & products

Marine systems Powered by know-how

5Year Warranty How do you build robust power systems that take you to the horizon and beyond? The solution is powered by know-how. With over 50 years of experience, Victron Energy has learned what it takes to build marine systems that stand the test of time and the environment. Our customers value the reassurance that our power solutions deliver knowing they have a worldwide network of authorized dealers by their side. They know we don’t cut corners. They know our family-owned and operated business is built on a foundation of trust they can always depend on. MARINE SYSTEMS Energy. Anytime. Anywhere.

5

7 4 Introduction 12 Application examples 18 DC-only and inverter system examples 20 Inverter/charger system examples 30 Helpful system design resources 36 Monitoring solutions 38 Marine MFD integrations 43 Technical information 142 Flexible building blocks for any kind of power challenge 144 Why Victron Energy? 146 Marine systems at work Index

Energy. Anytime. Anywhere. When you need robust power solutions that go anywhere you go, it’s good to know the power of know-how is by your side. Freedom. Powered by know-how.

Auto start/stop generator Resistive tank level & temperature inputs Solar irradiance & windmeters Lithium batteries Marine MFDs Victron Connected Products The all new Ekrano GX This flexible powerhouse enables the best of Victron (remote) monitoring for your energy system. Housing the smartest and latest technology powered by know-how, this fully featured communication centre lets you monitor, control and maximise system performance wherever you are. With a waterproof 7-inch touchscreen and aluminium casing that’s built to last. The Ekrano GX puts the power in your hands. victronenergy.com/monitoring The gateway to independence Powered by know-how Energy. Anytime. Anywhere. Works with

Solar-powered sailing around the world 4x LiFePO4 Battery 12,8V / 200Ah - Smart 1x Lynx Smart BMS 1x Lithium SuperPack 12,8V 100Ah 2x Smart BatteryProtect 48V-100A 1x Cyrix-i 400 A 48V 1x MultiPlus-II GX 48/3000/35-32 3x SmartSolar MPPT 100/20 1x SmartShunt 500A 1x Cerbo GX 1x GX Touch 50 1x Lynx Power In 1x Lynx Distributor 1x Shore power cord 25M 16A / 250VA 1x Galvanic Isolator 1x Power inlet stainless with cover 2x solar panels APPLICATION EXAMPLE The first thing Tiger Brisius and his partner Julia did in preparation for their planned circumnavigation of the world was to remove the diesel engine from their thirty-two foot Olle Enderlein yacht and replace it with an electric motor. The motor is a GreenStar Marine E20 rated at over 10kW max - which GreenStar say is equivalent to a 20HP marine engine. The great thing about having an electric motor on board a sailing yacht, of course, is that when you’re voyaging under sail the motor becomes your electricity generator. Sailing at a little over 7 knots (the maximum hull speed for their classic Scandinavian long keeled yacht) they’re expecting their propulsion unit, working as a hydrogenerator, to return an enviable 1000W/1400W from their three blade 15 x 9 propellor. Tiger and Julia are installing the motor themselves. Ocean voyaging demands self reliance - so it is essential to understand every aspect of your vessel’s gear. Tiger’s shopping list for Idun’s electrical installation is as follows: The Lynx Smart Battery Management System controls the charging of Victron Energy Lithium Batteries, and protects them from misuse. The Smart Battery Protect automatically ensures that the ‘house’ and ‘starter’ battery cannot accidentally be depleted by DC loads. The SmartShunt monitors the power in/ out of the main battery bank, and reports its State of Charge. It can also monitor

13 the voltage of a second battery bank, a midpoint voltage, or a temperature sensor. The Galvanic Isolator ensures that her underwater gear will not be damaged by galvanic corrosion whilst plugged into shore power. Julia and Tiger invite you to follow them on their Instagram page which they will keep updated with news and pictures of their preparations. They welcome any questions about their set up and plans ...and once underway they’ll be sharing their ocean experience with you first-hand. AC supply AC loads essential Loads nonessential DC loads

Fountaine Pajot Helia 44 catamaran APPLICATION EXAMPLE Frits Boonen and his wife Liza will soon be setting off on a circumnavigation. For the next ten years they will be living aboard their Fountaine Pajot Helia 44 - a catamaran which they have adapted for their voyage. One of those adaptations was to remove the propane gas cooker - both because of the inherent dangers of gas, and because it can be a real hassle to find replacement cylinders in remote locations around the world. The galley is now all-electric - boasting an induction hob, electric oven, electric Barbecue, and a washing machine. To support all these new conveniences their power supply had to be re-imagined. Frits and Liza want to lie to their anchor independent from the shore for up to two months at a time without using shore-based battery-charging.

At the heart of their power system two 3kW Quattro Inverter/Chargers provide 230VAC to domestic appliances from the boat’s 12VDC battery storage. Their Quattro’s have a 120A charging ability which makes short work of recharging their impressive 900Ah battery bank from generator. On board the catamaran, four charging methods are available: There is a 1kWp solar array with multiple MPPT solar charge controllers to maximise power harvest. Two engine-driven high power smart alternators are provided with two BuckBoost DC-DC converters which accept a wide range of alternator output voltages for conversion to a stable battery-charging voltage at 12V or 24V. There is an AC generator which can be started manually - or automatically by a relay which is tripped whenever the battery bank falls below 30% state-of-charge. Battery charging (and discharging) is controlled by a VE.Bus BMS battery management system.

Once the battery bank has been recharged to 90% state of charge the generator is automatically shut down. The vessel’s battery bank can also be charged from a shore supply. An Isolation Transformer ensures the safety of crew and vessel from ground faults and galvanic corrosion; it also automatically switches between 115 and 230 VAC depending on local supply. The Quattros can easily be programmed with a current limit to match the pontoon’s marine power distribution network threshold. Any power-demand above that threshold will not trip a shore-side fuse thanks to Quattros PowerAssist feature which will instantly supplement excess demand with power from the battery bank. When the power demand falls below the set threshold, the Quattro will make maximum use of shore power by sending any surplus power - up to the threshold - to recharge the batteries. APPLICATION EXAMPLE Isolation Transformer AC shore supply AC generator supply VE.Bus BMS Mains detector AC essential loads VE.Bus Quattro Quattro AC non-essential loads Buck-Boost Inverter Starter battery Alternator 1 Charge disconnect Load disconnect DC contactor AC circuit for battery chargers Ignition switch DC system Buck-Boost Starter battery Alternator 2 Ignition switch Lithium Battery Smart BMV-712 Smart VE.Bus BMS

17

MARINE SYSTEM DESIGNS Flexible building blocks for any power challenge With our modular robust product range you can build power systems exactly to the most demanding specifications. Here are a few examples, from a simple system having only DC devices, to larger parallel- and three-phase systems. 1. Simple system using only DC devices The battery charger also funtions as a power supply. Battery Charger DC Loads Shore Power Battery

19 2. System with inverter This system uses an inverter to supply 230VAC or 120VAC. Many charger models have three outputs which allow for several battery groups to be charged separately. Battery Charger Battery Battery Battery Inverter DC Loads Shore Power AC Loads

MARINE SYSTEM DESIGNS Uninterruptable AC-power on board Using our extremely resilient pure sine wave inverter/chargers, sensitive electronics can be safely powered. They provide peak-power supply at about twice their continuous rated capacity - this ensures problem-free start-up of motor- powered devices, for example. Tell the inverter the current limit of available shore- or generator-power and its PowerControl feature will keep the AC input below that limit - regardless of demand. Yet, thanks to the PowerAssist feature, above-limit demands will instantly be met by adding battery-power to the supply. No more tripping shore fuses, or overloaded generators. When on-board loads once again fall below the current limit, the available surplus energy - up to the trip limit - will be used to recharge the batteries. So it's no longer necessary to size a generator according to the maximum expected load; it can be downsized, saving cost and weight. Enjoy reliable energy at any time with a MultiPlus or Quattro inverter/charger on board.

21 PowerAssist – boosting the capacity of shore or generator power 3. Multi-functional The MultiPlus inverter/charger will function as a UPS (uninterruptible power supply). Its AC output power can be added to a limited shore power source - boosting it with battery power thanks to the PowerAssist feature. DC Loads Shore Power AC Loads MultiPlus Water heater Digital Multi Control Battery

MARINE SYSTEM DESIGNS MultiPlus and Quattro inverter/chargers The MultiPlus and Quattro products play a central role in both AC and DC systems. They are both powerful battery chargers and inverters in one box. If more than one AC source is available, choose the Quattro - it accepts two AC sources, automatically switching to the live source (auto source select). It also has two AC outputs, and will shutdown output 2 (which should be used on-purpose to supply non-essential loads) when there is no AC input. 4. System with AC-generator The Quattro has the same functions as the MultiPlus, but with an extra function a transfer system which can be directly connected to shore power and a generator. DC Loads Shore Power AC Loads Quattro Water heater Cerbo GX and GX touch Battery AC Generator

23 MultiPlus vs Quattro 5. Using a DC Generator In this MultiPlus-based system example the DC generator charges the batteries and/or supplies the inverters. This system offers a lot of advantages such as weight reduction and comfort. DC Loads Shore Power AC Loads Digital Multi Control DC Generator MultiPlus Water heater Cyrix ct Alternator Starter battery House battery

MARINE SYSTEM DESIGNS 6. Shore, generator and alternator charging The Quattro inverter/charger will draw power from the battery bank, shoresupply, AC-generator or from the alternator, depending on availability and demand. The Smart BuckBoost prevents alternator overload and safely charges the lithium battery. Quattro DC Loads Shore Power AC Loads AC Generator Water heater Cerbo GX and GX touch Alternator Starter battery Lithium house battery

25 Easy to configure Configuring parallel- and three-phase systems is easy. Our VEConfiguration tools allows the installer to put components together, without any hardware changes or DIP switches. Just using standard products. 7. Parallel system Our inverters, and inverter/chargers can be paralleled to meet higher power requirements. A simple setting with VictronConnect or our VE Configuration tools is sufficient. Digital Multi Control DC Loads AC Loads 3x MultiPlus Shore Power Batteries

MARINE SYSTEM DESIGNS 8. Three-phase configuration Our inverters can be configured for Split- or Three-Phase power supply. DC Loads AC Loads Shore Power Batteries 3x MultiPlus Cerbo GX

27

Energy. Anytime. Anywhere. The solution is powered by know-how. Our inverter/chargers can be connected in parallel and/or 3-phase configuration to meet any power demand - from 500VA to 180kVA. But it’s the combination of proven hardware, up-to-date monitoring apps and integration options that turn a Victron Energy system into an unbeatable system. How can you meet almost any power demand? Spirit P70 yacht with Victron Energy on board. See the film

MARINE SYSTEMS Helpful system design resources Victron Energy offers one of the largest product ranges in the market to cover almost every power challenge. Admittedly, choosing the right system concepts and products can be daunting. This brochure aims to assist with basic system designs and concepts. Check our helpful resources or feel free to discuss your ideas with a local Victron specialist. Check our Marine market webpage to explore our deepdive with example calculations.

31 Energy Unlimited, Wiring Unlimited Understand the principals of battery-based energy systems and get your wiring right with our specialist books. Find a large variety of technical papers and schematics in our download section. System examples booklet Download our system examples booklet for Marine systems to browse many design suggestions. MPPT Calculator With the MPPT calculator you can match solar modules to MPPT charge controllers. www.victronenergy.com/mppt-calculator Product & design information The product pages on our website provide all necessary product information, such as product data sheets, product manuals, more system examples, enclosure drawings and certificates.

MARINE SYSTEMS Victron Professional Keep up-to-date with the latest product developments and access our large range of training courses. Successful completion is rewarded with a certificate. professional.victronenergy.com Victron Community Search our Knowledge base for questions and answers or ask our large and active community of experienced Victron users. community.victronenergy.com

33 Victron Energy Blog Follow interesting cases in great detail, learn about new products and new system design resources. Never miss the latest by subscribing to the newsletter. victronenergy.com/blog Victron Energy Blog Follow interesting stories in detail, hear about our new products and resources. victronenergy.com/blog YouTube Follow our YouTube channel, see interesting installations and watch field tests. Learn from instructional video’s, Q&A sessions and new product introductions. youtube.com/victronenergy

Energy. Anytime. Anywhere. Experience the power of Victron Energy Monitoring

Bringing the best of Victron systems together in a powerful experience which will redefine life on board. Thanks to the know-how that powers our connected products, you can monitor and control your systems, prevent issues and resolve faults straight from your glassbridge, GX touchscreen, VictronConnect app or VRM remote monitoring portal. Know more at victronenergy.com/monitoring Works with

MONITORING SOLUTIONS Ekrano - All-in-one GX device Combines a fully featured GX device and GX Touch in one. This practical combination of a Cerbo GX and GX Touch gives you easy access to the ports from the back of the device. GlobalLink 520 The GlobalLink 520 allows you to connect Victron VE.Direct equipment, - such as battery monitors, MPPT solar chargers, the IP43 Charger or Inverters to our free remote monitoring website: the VRM Portal. The GlobalLink uses the LTE-M cellular network and the first five years of cellular connectivity is included in the purchase price. The unit will come pre-configured and ready for use out of the box. No need to change any settings. GX Touch 50 and GX Touch 70 The GX Touch 50 and GX Touch 70 are display accessories for our Cerbo GX. The five-inch and seven-inch touch-screen displays give an instant overview of your system and allow settings to be adjusted in the blink of an eye. Simply connect to the Cerbo GX with one cable. The super-slim waterproof design, top-mountable setup and simple installation brings a lot of flexibility when creating a crisp and clean dashboard. Cerbo GX This communication-centre allows you to always have perfect control over your system from wherever you are and maximises its performance. Simply connect through our Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch, an MFD or our VictronConnect app thanks to its added Bluetooth capability. Offers the highest level of control thanks to an impressive range of features and integrations. System monitoring solutions Monitoring sytem data is crucial for optimisation of energy harvest, storage and use. With Victron you have complete insight into your installation, from the system's performance to its tank levels, temperatures and more. For local monitoring choose Smart products with Bluetooth, and connect to our VictronConnect app. For worldwide monitoring choose a GX communication centre such as the Ekrano GX and use our remote management platform - VRM. Learn more at victronenergy.com/monitoring

37 Battery Monitor Key tasks of the Victron Battery Monitor are measuring charge and discharge currents as well as calculating the state-of-charge and time-to-go of a battery. An alarm is sent when certain limits are exceeded (such as an excessive discharge). Smart products can be monitored by our VictronConnect app. GX Tank 140 The GX Tank 140 takes readings from up to four tank-level sensors. It is an accessory for our range of GX system monitoring products, of which the Cerbo GX is the most commonly used model. Tank-levels can be read-out locally in the system, as well remotely through our VRM Portal. Smart Battery Sense Smart Battery Sense is a wireless battery voltage- and temperature-sensor for Victron MPPT Solar Chargers. With voltage- and temperature-sense in place, batteries will be better charged; improving charging-efficiency and prolonging battery life. Digital Multi Control Panel GX With this panel you are able to remotely monitor and control MultiPlus and Quattro systems. A simple turn of the button can limit the power supply of for example a generator and/or shore-side current. The setting range is up to 200A.

Monitor and control your boat’s power system, right on your glass bridge. Thanks to the Victron Marine MFD app, the boat’s power system and navigation status are now integrated and visible from one screen. Simply connect the MFD to a GX-device such as the Ekrano GX with a network cable - and that’s it. Marine MFD Glass bridge Integration Energy. Anytime. Anywhere. Check tank levels, monitor temperature and humidity levels. Monitor incoming energy sources, shore power, generator status, together with the AC and DC loads See the battery stateof-charge % and the charging status.

39 Change all settings of Victron connected devices via Remote Console Operate devices with simple controls, such as generator auto-start or the shore power input current limit. Works with: MFD navigation data Scan to learn more

Energy. Anytime. Anywhere. When you need to monitor your power system to see how far you can push your dream trip it’s good to know the power of know-how is by your side. Adventure. Powered by know-how.

41

Note - for our latest datasheets please refer to our website: www.victronenergy.com

43 Technical information 46 Inverters Smart 1600VA - 5000VA 48 Inverters 250VA - 1200VA - 230V and 120V VE.Direct 50 Inverters 1200VA - 5000VA - 230V 52 MultiPlus Inverter/Charger 500VA - 2000VA - 230V 54 MultiPlus-II Inverter/Charger 230V 56 MultiPlus-II Inverter/Charger 2 x 120V 58 MultiPlus-II GX Inverter/Charger 60 MultiPlus Inverter/Charger 800VA - 5kVA 230V 62 MultiPlus Inverter/Charger 2kVA and 3kVA 120V 64 Quattro Inverter/Charger 3kVA - 15kVA 230V 66 Quattro Inverter/Charger 3kVA - 10kVA 120V 68 Blue Smart IP22 Charger 70 Blue Smart IP67 Charger 72 Smart IP43 Charger 74 Battery charger 12/24V 76 Skylla-IP65 battery charger 78 Skylla-i battery charger 24V 80 Skylla-TG charger 24/48V 230V 82 Skylla charger 24V universal input and GL approval 84 Skylla-TG 24/30 and 24/50 GMDSS 86 Centaur charger 12/24V 88 Isolation transformers 90 Autotransformer 120/240V - 32A and 120/240V - 100A 92 Orion-Tr Smart DC-DC charger isolated 94 Orion-Tr Smart DC-DC charger non-isolated 96 Orion-Tr DC-DC converters, low power, non-isolated 97 Orion DC-DC converters, high power, non-isolated 98 Orion IP67 24/12 and 12/24 DC-DC converters, non-isolated 99 Buck-Boost DC-DC converter 100 Ekrano GX 102 Cerbo GX & GX Touch 104 Color Control GX 108 Wall mounted display enclosures 109 Smart batteryprotect 12/24V 65A/100A/200A 110 Cyrix-ct 12/24V 120A and 230A 112 Cyrix-i 400A 12/24V and 24/48V 114 Cyrix Li-ion 230A series 116 BMV-700 series: Precision battery monitoring 118 BMV-712 Smart: Bluetooth inside 120 SmartShunt 300A / 500A / 1000A / 2000A 122 SmartShunt IP65 300A / 500A / 1000A / 2000A 124 Argodiode battery isolators 125 Argofet battery isolators 126 Battery Balancer 128 12,8 & 25,6V Lithium-Iron-Phosphate batteries Smart: with Bluetooth 130 12,8, 25,6 & 51,2V Lithium NG batteries 132 Battery Management System (BMS) Overview 134 AGM Super Cycle battery 135 Telecom batteries 136 Gel and AGM batteries 140 BlueSolar & SmartSolar MPPT charge controllers - overview

Blue Smart Charger IP65 Professional Smart Battery Charger • Waterproof 12V battery charger with a configurable current of 2 or 7A • Check the charging status with the VictronConnect app and configure all settings • Seven-step smart charge algorithm & battery life enhancing features • Recovery of fully discharged ‘dead’ batteries • Automatic power supply function • Severe cold performance down to -40°C Waterproof 12V battery charger with a configurable current Seven step smart charge algorithm & battery life enhancing features Can recover fully discharged ‘dead’ batteries Charging status indicator Takes best of care of Li-ion, WET, MF, GEL, AGMand Ca/Ca batteries Select pre-set charging algorithms for di erent battery types and check the charging status • Short circuit, overheat and reverse polarity protection • Automatic storage mode: no need to disconnect when battery is fully charged. • Automatic power supply function

INCLUDED OPTIONAL ACCESSORIES Connect clamps Eyelet connector Car plug Extension cable Eyelet connector (M8) with fuse Connect clamps with fuse Blue Smart IP65 Charger 6 V/12 V - 1.1 A 12 V4/5/7/10/15/25 A 24 V 5/8/13 A Input voltage and frequency range 100 - 250VAC | 45 - 65Hz 230 VAC Efficiency 82% 94% 95% Standby power consumption <0,5 W 0,5 W Minimum battery voltage Starts charging from down to 0 V Charge voltage ‘absorption’ Normal: 7,2 V | 14,4 V High: 7,35 V | 14,7 V Li-ion: 7,1 V | 14,2 V Normal: 14,4 V High: 14,7 V Li-ion: 14,2 V Normal: 28,8 V High: 29,4 V Li-ion: 28,4 V Charge voltage ‘float’ Normal: 6,9 V | 13,8 V High: 6,9 V | 13,8 V Li-ion: Disabled Normal: 13,8 V High: 13,8 V Li-ion: 13,5 V Normal: 27,6 V High: 27,6 V Li-ion: 27,0 V Charge voltage ‘storage’ Normal: 6,6 V | 13,2 V High: 6,6 V | 13,2 V Li-ion: 6,75 V | 13,5 V Normal: 13,2 V High: 13,2 V Li-ion: 13,5 V Normal: 26,4 V High: 26,4 V Li-ion: 27,0 V Charge current 1.1 A 4 / 5 / 7 / 10 / 15 / 25 A 5 / 8 / 13 A Low current mode 0,5A 2 / 2 / 2 / 3 / 4 / 10 A 2 / 3 / 4 A Temperature compensation (lead-acid batteries only) 8 mV/°C | 16 mV/°C 16 mV/°C 32 mV/°C Power supply mode Yes Back current drain 0,1 Ah/month (140uA) 0,7 Ah/month (1 mA) Protection Reverse polarity, Output short circuit, Over temperature Operating temp. range -30 to +50°C (full rated output up to 30°C) -40 to +60°C (full rated output up to 30°C) (cables retain flexibility at low temperature) Humidity (non-condensing) Max 95% Charge algorithm 7-stage adaptive Bluetooth -4dBm, 2402 - 2480 MHz ENCLOSURE Battery-connection Black and red cable of 1,5 meter 230V AC-connection 1.5m cable with CEE 7/16 or AS/NZS 3112 plug or Cable of 1,5 meter with CE 7/16, CE 7/17, BS 1363 plug (UK) AS/NZS 3112 plug Protection category IP65 (splash and dust proof) Weight 0,4 kg IP65 12 V 25 A 24 V 13 A: 1,9 kg Other: 0,9 kg IP65s 12 V 4/5 A : 45 x 81 x 182 mm IP65 12 V 7 A 24 V 5 A: 47 x 95 x 190 mm Dimensions (h x w x d) 38 x 64 x 153 mm IP65 12 V 10/15 A 24 V 8 A: 60 x 105 x 190 mm IP65 12 V 25 A 24 V 13 A: 75 x 140 x 240 mm STANDARDS Safety EN 60335-1, EN 60335-2-29 Emission EN 55014-1, EN 61000-6-3, EN 61000-3-2 Immunity EN 55014-2,EN 61000-6-1, EN 61000-6-2, EN 61000-3-3

??????? INVERTERS SMART 1600VA - 5000VA www.victronenergy.com Victron Energy B.V. | De Paal 35 | 1351 JG Almere | The Netherlands E-mail: sales@victronenergy.com www.victronenergy.com Bluetooth built-in: fully configurable with a tablet or smartphone • Low battery voltage alarm • Low battery voltage cut-off and restart levels • Dynamic cut-off: load dependent cut-off level • Output voltage: 210 – 245 V • Frequency: 50 Hz or 60 Hz • ECO mode on/off and ECO mode sense level • Alarm relay Monitoring: • In- and output voltage, load and alarms VE.Direct communication port The VE.Direct port can be connected to a computer (VE.Direct to USB interface cable needed) to configure and monitor the same parameters. Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature. High start-up power Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools. ECO mode When in ECO mode, the inverter will switch to standby when the load decreases below a preset value. Once in standby the inverter will switch on for a short period every 2,5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain on. Remote on/off A remote on/off switch or relay contact can be connected to a two pole connector. Alternatively, the H terminal (left) of the two pole connector can be switched to battery plus, or the L terminal (right) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example). LED diagnosis Please see manual for a description. To transfer the load to another AC source: the automatic transfer switch For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption. Alternatively use a MultiPlus with built-in transfer switch. Inverters Smart 1600 VA – 5000 VA Inverter Smart 12/3000 Battery Charger Inverter

47 Victron Energy B.V. | De Paal 35 | 1351 JG Almere | The Netherlands E-mail: sales@victronenergy.com www.victronenergy.com Inverter Smart 12/1600 24/1600 48/1600 12/2000 24/2000 48/2000 12/3000 24/3000 48/3000 24/5000 48/5000 Parallel and 3-phase operation No INVERTER Input voltage range 9.3–17V 18.6–34V 37.2–68V Output Output voltage: 230 VAC ±2% 50Hzor60Hz±0.1% (1) Cont. output power at 25ºC (1) 1600VA 2000VA 3000VA 5000VA Cont. output power at 25ºC 1300W 1600W 2400W 4000W Cont. output power at 40ºC 1200W 1450W 2200W 3700W Cont. output power at 65ºC 800W 1000W 1700W 2800W Peak power 3000W 4000W 6000W 10000W Dynamic (load dependent) DC low shut down (fully configurable) Dynamic cut-off, see https://www.victronenergy.com/live/ve.direct:phoenix-inverters-dynamic-cutoff Max. efficiency 12/ 24 /48 V 92 / 94 / 94 % 92 / 94 / 94 % 93 / 94 / 95 % 95 / 96 % Zero load power 12 / 24 / 48 V 8/9/11W 8/9/11W 12 / 13 / 15 W 18 / 20 W Zero load power in ECO mode 0.6 / 1.3 / 2.1 W 0.6 / 1.3 / 2.1 W 1.5 / 1.9 / 2.8 W 2.2 / 3.2 W GENERAL Programmable relay (2) Yes Stop & start power ECO-mode adjustable Protection (3) a -g Bluetooth wireless communication For remote monitoring and system integration VE.Directcommunication port For remote monitoring and system integration Remote on-off Yes Common Characteristics Operating temperature range: -40 to +65ºC (fan assisted cooling) Humidity (non-condensing): max 95 % ENCLOSURE Common Characteristics Material & Colour: steel (blue RAL 5012; and black RAL 9017) Protection category: IP21 Battery-connection M8 bolts M8 bolts 12 V/24 V: 2+2 M8 bolts 48V:M8 bolts 24 V: 2+2 M8 bolts 48 V: M8 bolts 230 VAC-connection Screw terminals Weight 12kg 13kg 19kg 29 kg / 28 kg Dimensions (hxwxd) 485 x 219 x 125 mm 485 x 219 x 125 mm 533 x 285 x 150 mm (12 V) 485 x 285 x 150 mm (24 V/48 V) 595 x 295 x 160 mm (24 V) 555 x 295 x 160 mm (48 V) STANDARDS Safety EN 60335-1 Emission Immunity EN 55014-1 / EN 55014-2/ EN-IEC 61000-6-1 / EN-IEC 61000-6-2 / EN-IEC 61000-6-3 Automotive Directive ECE R10-5 1) Non-linear load, crest factor 3:1 2) Programmable relay that can a.o. be set for general alarm, DC under voltage or genset start/stop function. AC rating: 230 V /4 A DC rating: 4 A / 35 VDC, 1 A / 60 VDC 3) Protection key: a) output short circuit b) overload c) battery voltage too high d) battery voltage too low e) temperature too high f) 230 VAC on inverter output g) input voltage ripple too high Inverter Control This panel is intended for remote on/off control of all Inverters Smart units. Color Control GX and other GX devices Provides monitoring and control. Locally, and remotely on the VRM Portal. BMV-712 Smart Battery Monitor The BMV Battery Monitor features an advanced microprocessor control system combined with high resolution measuring systems for battery voltage and charge/discharge current. Besides this, the software includes complex calculation algorithms, like Peukert’s formula, to exactly determine the state of charge of the battery. The BMV selectively displays battery voltage, current, consumed Ah or time to go. The monitor also stores a host of data regarding performance and use of the battery. VE.Direct to USB interface Connects to a USB port. Bluetooth wireless communication Connects to a smart phone (both iOS and Android).

??????? INVERTERS 250VA - 1200VA - 230V AND 120V VE.DIRECT www.victronenergy.com VE.Direct communication port The VE.Direct port can be connected to: • A computer (VE.Direct to USB interface cable needed) • Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smartdongle needed) Fully configurable: • Low battery voltage alarm trip and reset levels • Low battery voltage cut-off and restart levels • Dynamic cut-off: load dependent cut-off level • Output voltage 210 - 245V • Frequency 50 Hz or 60 Hz • ECO mode on/off and ECO mode sense level Monitoring: • In- and output voltage, % load and alarms Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature. High start-up power Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools. ECO mode When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on. Remote on/off A remote on/off switch can be connected to a two-pole connector, or between battery plus and the left-hand contact of the two-pole connector. LED diagnosis Please see manual for a description. To transfer the load to another AC source: the automatic transfer switch For our low power inverters, we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption. Available with different output sockets Schuko UK AU/NZS IEC-320 Nema5-15R (male plug included) DC connection with screw terminals No special tools needed for installation GFCI Inverters 250VA – 1200VA 230V and 120V, 50Hz or 60Hz Inverter 12/375 VE.Direct Inverter 12/375 VE.Direct

49 Inverter 12 Volt 24 Volt 48 Volt 12/250 24/250 48/250 12/375 24/375 48/375 12/500 24/500 48/500 12/800 24/800 48/800 12/1200 24/1200 48/1200 Cont. power at 25°C (1) 250VA 375VA 500VA 800VA 1200VA Cont. power at 25°C / 40°C 200 / 175W 300 / 260W 400 / 350W 650 / 560W 1000 / 850W Peak power 400W 700W 900W 1500W 2200W Output AC voltage / frequency (adjustable) 230VAC or 120VAC +/- 3% 50Hz or 60Hz +/- 0,1% Input voltage range 9,2 - 17 / 18,4 - 34,0 / 36,8 - 62,0V DC low shut down (adjustable) 9,3 / 18,6 / 37,2V Dynamic (load dependent) DC low shut down (fully configurable) Dynamic cut-off, see https://www.victronenergy.com/live/ve.direct:phoenix-inverters-dynamic-cutoff DC low restart and alarm (adjustable) 10,9 / 21,8 / 43,6V Battery charged detect (adjustable) 14,0 / 28,0 / 56,0V Max. efficiency 87 / 88 / 88% 89 / 89 / 90% 90 / 90 / 91% 90 / 90 / 91% 91 / 91 / 92% Zero-load power 4,2 / 5,2 / 7,9W 5,6 / 6,1 / 8,5W 6 / 6,5 / 9W 6,5 / 7 / 9,5W 7 / 8 / 10W Default zero-load power in ECO mode (default retry interval: 2,5 s, adjustable) 0,8 / 1,3 / 2,5W 0,9 / 1,4 / 2,6W 1 / 1,5 / 3,0W 1 / 1,5 / 3,0W 1 / 1,5 / 3,0W ECO mode stop and start power setting Adjustable Protection (2) a - f Operating temperature range -40 to +65°C (fan assisted cooling) Derate 1,25% per °C above 40°C Humidity (non-condensing) max 95% ENCLOSURE Material & Colour Steel chassis and plastic cover (blue Ral 5012) Battery-connection Screw terminals Maximum cable cross-section 10mm² / AWG8 10mm² / AWG8 10mm² / AWG8 25/10/10mm² / AWG4/8 /8 35 / 25 / 25mm2 / AWG2/4 /4 Standard AC outlets 230V: Schuko (CEE 7/4), IEC-320 (male plug included) UK (BS 1363), AU/NZ (AS/NZS 3112) 120V: Nema 5-15R, GFCI Protection category IP 21 Weight 2,4kg / 5,3lbs 3,0kg / 6,6lbs 3,9kg / 8.5lbs 5,5kg / 12lbs 7,4kg / 16,3lbs Dimensions (h x w x d, mm) (h x w x d, inch) 86 x 165 x 260 3.4 x 6.5 x 10.2 86 x 165 x 260 3.4 x 6.5 x 10.2 86 x 172 x 275 3,4 x 6,8 x 10,8 105 x 216 x 305 4.1 x 8.5 x 12.1 (12V model: 105 x 230 x 325) 117 x 232 x 327 4.6 x 9.1 x 12.9 (12V model: 117 x 232 x 362) ACCESSORIES Remote on-off Yes Automatic transfer switch Filax STANDARDS Safety EN-IEC 60335-1 / EN-IEC 62109-1 / UL 458(3) EMC EN 55014-1 / EN 55014-2 / IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000-6-3 Automotive Directive ECE R10-4 1) Nonlinear load, crest factor 3:1 2) Protection key: a) output short circuit b) overload c) battery voltage too high d) battery voltage too low e) temperature too high f) DC ripple too high 3) UL 458 only for inverters with GFCI output socket Battery Alarm An excessively high or low battery voltage is indicated by an audible and visual alarm, and a relay for remote signalling. BMV Battery Monitor The BMV Battery Monitor features an advanced microprocessor control system combined with high resolution measuring systems for battery voltage and charge/discharge current. Besides this, the software includes complex calculation algorithms to exactly determine the state of charge of the battery. The BMV selectively displays battery voltage, current, consumed Ah or time to go. The monitor also stores a host of data regarding performance and use of the battery. VE.Direct Bluetooth Smart dongle (must be ordered separately)

??????? INVERTERS 1200VA - 5000VA - 230V www.victronenergy.com Victron Energy B.V. | De Paal 35 | 1351 JG Almere | The Netherlands E-mail: sales@victronenergy.com www.victronenergy.com SinusMax - Superior engineering Developed for professional duty, this range of inverters is suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimized efficiency but without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem-free, to any load. Extra start-up power A unique feature of the SinusMax technology is very high start-up power. Conventional high frequency technology does not offer such extreme performance. The Inverters, however, are well suited to power up difficult loads such as refrigeration compressors, electric motors and similar appliances. Virtually unlimited power thanks to parallel and 3-phase operation capability Up to 6 units inverters can operate in parallel to achieve higher power output. Six 24/5000 units, for example, will provide 24 kW / 30 kVA output power. Operation in 3-phase configuration is also possible. To transfer the load to another AC source: the automatic transfer switch If an automatic transfer switch is required we recommend using the MultiPlus inverter/charger instead. The switch is included in these products and the charger function of the MultiPlus can be disabled. Computers and other electronic equipment will continue to operate without disruption because the MultiPlus features a very short switchover time (less than 20 milliseconds). Communications interface These larger inverter models come with a VE.Bus port. All you need to connect to your PC is our MK3-USB VE.Bus to USB interface (see under accessories). Together with our VictronConnect or VEConfigure software, which can be downloaded free of charge from our website, parameters of the inverters can be customized. This includes output voltage and frequency, over and under voltage settings and programming the relay. This relay can for example be used to signal several alarm conditions, or to start a generator. The inverters can also be connected to a GX device (eg Cerbo GX) for monitoring and control. New applications of high power inverters The possibilities of paralleled high power inverters are truly amazing. For ideas, examples and battery capacity calculations please refer to our book ‘Energy Unlimited’ (available free of charge from Victron Energy and downloadable from www.victronenergy.com). Inverter Compact 24/1600 Inverters Inverter 24/5000 1200 VA – 5000 VA (per module) Inverter Battery Charger

51 Victron Energy B.V. | De Paal 35 | 1351 JG Almere | The Netherlands E-mail: sales@victronenergy.com www.victronenergy.com Inverter C12/1200 C24/1200 C12/1600 C24/1600 C12/2000 C24/2000 12/3000 24/3000 48/3000 24/5000 48/5000 Parallel and 3-phase operation Yes INVERTER Input voltage range (VDC) 9,5 – 17 V 19 – 33 V 38 – 66 V Output Output voltage: 230 VAC ± 2 % Frequency: 50 Hz ±0,1 % (1) Cont. output power at 25ºC (VA) (2) 1200 1600 2000 3000 5000 Cont. output power at 25ºC (W) 1000 1300 1600 2400 4000 Cont. output power at 40ºC (W) 900 1200 1450 2200 3700 Cont. output power at 65ºC (W) 600 800 1000 1700 3000 Peak power (W) 2400 3000 4000 6000 10000 Max. efficiency 12/ 24 / 48V (%) 92 / 94 92 / 94 92 / 92 93 / 94 / 95 94 / 95 Zero load power 12 / 24 / 48V (W) 8 / 10 8 / 10 9 / 11 20 / 20 / 25 30 / 35 Zero load power in AES mode (W) 5 / 8 5 / 8 7 / 9 15 / 15 / 20 25 / 30 Zero load power in Search mode (W) 2 / 3 2 / 3 3 / 4 8 / 10 / 12 10 / 15 GENERAL Programmable relay (3) Yes Protection (4) a -g VE.Bus communication port For parallel and three phase operation, remote monitoring and system integration Remote on-off Yes Common Characteristics Operating temperature range: -40 to +65ºC (fan assisted cooling) Humidity (non-condensing): max 95 % ENCLOSURE Common Characteristics Material & Colour: aluminium (blue RAL 5012) Protection category: IP21 Battery-connection battery cables of 1.5 meter included M8 bolts 2+2 M8 bolts 230 V AC-connection G-ST18i plug Spring-clamp Screw terminals Weight (kg) 10 12 18 30 Dimensions (hxwhd in mm) 375 x 214 x 110 520 x 255 x 125 362 x 258 x 218 444 x 328 x 240 STANDARDS Safety EN 60335-1 Emission Immunity EN 55014-1 / EN 55014-2 1) Can be adjusted to 60 Hz and to 240 V 2) Non-linear load, crest factor 3:1 3) Programmable relay that can a.o. be set for general alarm, DC under voltage or genset start/stop function. AC rating: 230 V /4 A DC rating: 4 A up to 35 VDC, 1 A up to 60VDC 4) Protection key: a) output short circuit b) overload c) battery voltage too high d) battery voltage too low e) temperature too high f) 230 VAC on inverter output g) input voltage ripple too high Computer controlled operation and monitoring Several interfaces are available: Inverter Control This panel can also be used on a MultiPlus Inverter/Charger when an automatic transfer switch but no charger function is desired. The brightness of the LEDs is automatically reduced during night time. BMV-700 Battery Monitor The BMV-700 Battery Monitor features an advanced microprocessor control system combined with high resolution measuring systems for battery voltage and charge/discharge current. Besides this, the software includes complex calculation algorithms, like Peukert’s formula, to exactly determine the state of charge of the battery. The BMV-700 selectively displays battery voltage, current, consumed Ah or time to go. The monitor also stores a host of data regarding performance and use of the battery. Several models available (see battery monitor documentation). VE.Bus to NMEA 2000 interface Connects the device to a NMEA 2000 marine electronics network. See the NMEA 2000 & MFD integration guide MK3-USB VE.Bus to USB interface Connects to a USB port (see ‘A guide to VEConfigure’) Color Control GX Provides monitor and control. Locally, and also remotely on the VRM Portal.

??????? www.victronenergy.com Multifunctional, with intelligent power management The MultiPlus is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology, and a highspeed AC transfer switch in a single compact enclosure. Next to these primary functions, the MultiPlus has several advanced features, as outlined below. Parallel operation and three phase capability Up to six Multis can operate in parallel to achieve higher power output. In addition to parallel connection, three units can be configured for three-phase output. PowerControl - Dealing with limited generator, shore side or grid power With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist - Boosting the capacity of shore or generator power This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. Four stage adaptive charger and dual bank battery charging The main output provides a powerful charge to the battery system by means of advanced ‘adaptive charge’ software. The software finetunes the three-stage automatic process to suit the condition of the battery, and adds a fourth stage for long periods of float charging. The adaptive charge process is described in more detail on the Charger datasheet and on our website, under Technical Information. In addition to this, the MultiPlus will charge a second battery using an independent trickle charge output intended for a main engine or generator starter battery. High start-up power Needed to start high inrush loads such as power converters for LED lamps, halogen lamps or electric tools. Search Mode When Search Mode is ‘on’, the power consumption of the inverter in no-load operation is decreased by approx. 70%. In this mode the Multi, when operating in inverter mode, is switched off in case of no load or very low load, and switches on every two seconds for a short period. If the output current exceeds a set level, the inverter will continue to operate. If not, the inverter will shut down again. Programmable relay By default, the programmable relay is set as an alarm relay, i.e. the relay will de-energise in the event of an alarm or a pre-alarm (inverter almost too hot, ripple on the input almost too high, battery voltage almost too low). Remote on / off / charger on Three pole connector. On-site system configuring, monitoring and control After installation, the MultiPlus is ready to go. Some settings can be changed with DIP switches. 500/800/1200VA models: remote switch / battery charge voltage / inverter frequency /search mode. 1600/2000VA models: battery charge voltage / search mode. For more settings use VE-Config or the VE.Bus Smart dongle. Remote configuring and monitoring Install a Cerbo GX or other GX product to connect to the internet. Operational data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge. When connected to the internet, systems can be accessed remotely, and settings can be changed. MultiPlus Inverter/Charger 500VA - 2000VA 12 / 24 / 48V MultiPlus 500 / 800 / 1200 / 1600 VA MultiPlus 2000 VA (bottom cover removed) GX Touch and Cerbo GX Provides intuitive system control and monitoring. Besides system monitoring and control the Cerbo GX enables access to our free remote monitoring website: the VRM Online Portal. VRM Portal Our free remote monitoring website (VRM) will display all your system data in a comprehensive graphical format. System settings can be changed remotely via the portal. Alarms can be received by e-mail. MULTIPLUS INVERTER/CHARGER 500VA - 2000VA - 230V

53 Victron Energy B.V. | De Paal 35 | 1351 JG Almere | The Netherlands E-mail: sales@victronenergy.com 12 Volt 24 Volt 48 Volt MultiPlus 12/500/20 MultiPlus 24/500/10 MultiPlus 48/500/6 MultiPlus 12/800/35 MultiPlus 24/800/16 MultiPlus 48/800/9 MultiPlus 12/1200/50 MultiPlus 24/1200/25 MultiPlus 48/1200/13 MultiPlus 12/1600/70 MultiPlus 24/1600/40 MultiPlus 48/1600/20 MultiPlus 12/2000/80 MultiPlus 24/2000/50 MultiPlus 48/2000/25 PowerControl / PowerAssist No Yes Yes Yes Yes Three Phase and parallel operation Yes Yes Yes Yes Yes Transfer switch 16A 16A 16A 16A 35A INVERTER Input voltage range 9,5 – 17 V 19–33V 38–66V Output Output voltage: 230VAC ± 2% Frequency: 50Hz ± 0,1% (1) Cont. output power at 25°C(3) 500VA 800VA 1200VA 1600VA 2000VA Cont. output power at 25°C 430W 700W 1000W 1300W 1600W Cont. output power at 40°C 400W 650W 900W 1100W 1400W Cont. output power at 65°C 300W 400W 600W 800W 1000W Peak power 900W 1600W 2400W 2800W 3500W Maximum efficiency 90 / 91 / 92% 92 / 93 / 94% 93 / 94 / 95% 93 / 94 / 95% 93 / 94 / 95% Zero-load power 6/6/7W 7/7/8W 10 / 9 / 10 W 10 / 9 / 10 W 10 / 9 / 10 W Zero-load power in search mode 2/2/3W 2/2/3W 3 / 3 /3W 3 / 3 /3W 3 / 3 /3W CHARGER AC Input Input voltage range: 187-265 VAC Input frequency: 45 – 65 Hz Charge voltage 'absorption' 14,4 / 28,8 / 57,6 V Charge voltage 'float' 13,8 / 27,6 / 55,2 V Storage mode 13,2 / 26,4 /52,8 V Charge current house battery(4) 20 / 10 / 6 A 35/16/9A 50 / 25 / 13 A 70 / 40 / 20 A 80 / 50/ 25 A Charge current starter battery 1A (12 V and 24 V models only) Battery temperature sensor Yes GENERAL Programmable relay (5) Yes Protection (2) a –g VE.Bus communication port For parallel and three phase operation, remote monitoring and system integration (RJ45-spliter ASS030065510 needed for 500 / 800 / 1200 VA models) Remote on-off On/off/charger only On/off DIP switches Yes(6) Yes(6) Yes(6) Yes(7) Yes (7) Internal DC fuse 125 / 60 /30 A 150/80/40A 200/100/50A 200/125/60A no Common Characteristics Operating temp. range: -40 to +65°C (fan assisted cooling) Humidity (non-condensing): max 95% ENCLOSURE Common Characteristics Material & Colour: Steel/ABS (blue RAL 5012) Protection category: IP 21 Steel (RAL 5012), IP22 Battery-connection 16 / 10 / 10 mm² 25 / 16 / 10 mm² 35 / 25 / 10 mm² 50/35/16mm² M8bolts 230V AC-connection G-ST18i connector Screw Weight 4,4 kg 6,4 kg 8,2 kg 10,2 kg 15,5 kg Dimensions (h x w x d) 311 x 182 x 100 mm 360 x 240 x 100 mm 406 x 250 x 100 mm 470 x 265 x 120 mm 506 x 236 x 147 mm STANDARDS Safety EN-IEC 60335-1, EN-IEC 60335-2-29, EN 62109-1 Emission Immunity EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3 Automotive Directive ECE R10-5 1) Can be adjusted to 60Hz and to 240V 2) Protection: a. Output short circuit b. Overload c. Battery voltage too high d. Battery voltage too low e. Temperature too high f. 230VAC on inverter output g. Input voltage ripple too high 3) Non-linear load, crest factor 3:1 4) Up to 25°C ambient 5) Programmable relay which can be set for: general alarm, DC under voltage or generator start/stop signal function AC rating: 230V/4A DC rating: 4A up to 35VDC, 1A up to 60VDC 6) Remote / battery charge voltage / inverter frequency / search mode 7) Battery charge voltage / search mode Digital Multi Control Panel A convenient and low cost solution for remote monitoring, with a rotary knob to set PowerControl and PowerAssist levels. VE.Bus Smart Dongle Measures battery voltage and temperature and allows monitoring and control of Multis and Quattros with a smartphone or other Bluetooth enabled device. BMV-712 Smart Battery Monitor Use a smartphone or other Bluetooth enabled device to: 1.customize settings, 2.monitor all important data on single screen, 3.view historical data, 4.update the software when new features become available. MK3-USB (VE.Bus to USB interface) Connects to a USB port (see ‘A guide to VEConfigure’) VRM app Monitor and manage your Victron Energy system from your smart phone and tablet. Available for both iOS and Android

??????? MULTIPLUS-II INVERTER/CHARGER 230V \ MultiPlus-II Inverter/Charger 230 V Grid parallel topology with MPPT solar charge controller The MultiPlus-II will use data from the external AC current sensor (must be ordered separately) or power meter to optimise selfconsumption and, if required, to prevent grid feed. In case of a power outage, the MultiPlus-II will continue to supply the critical loads Standard marine, mobile or off-grid application Loads that should shut down when AC input power is not available can be connected to a second output (not shown). These loads will be taken into account by the PowerControl and PowerAssist function in order to limit AC input current to a safe value when AC power is available. A MultiPlus, plus ESS (Energy Storage System) functionality The MultiPlus-II is a multifunctional inverter/charger with all the features of the MultiPlus, plus an external current sensor option which extends the PowerControl and PowerAssist function to 50A resp. 100A. The MultiPlus-II is ideally suited for professional marine, yachting, vehicle and land based off-grid applications. It also has built-in anti-islanding functionality, and an increasingly long list of country approvals for ESS application. Several system configurations are possible. For more detailed information see the ESS Design and configuration manual. PowerControl and PowerAssist - Boosting the capacity of the grid or a generator A maximum grid or generator current can be set. The MultiPlus-II will then take account of other AC loads and use whatever is extra for battery charging, thus preventing the generator or grid from being overloaded (PowerControl function). PowerAssist takes the principle of PowerControl to a further dimension. Where peak power is so often required only for a limited period, the MultiPlus-II will compensate insufficient generator, shore or grid power with power from the battery. When the load reduces, the spare power is used to recharge the battery. Solar energy: AC power available even during a grid failure The MultiPlus-II can be used in off grid as well as grid connected PV and other alternative energy systems. It is compatible with both solar charger controllers and grid-tie inverters. Two AC Outputs The main output has no break functionality. The MultiPlus-II takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus-II. Loads that should not discharge the battery, like a water heater for example, can be connected to this output. Virtually unlimited power thanks to parallel (not for the 8k, 10k and 15k models) and three phase operation Up to 6 Multis can operate in parallel to achieve higher power output. Six 48/5000/70 units, for example, will provide 25 kW / 30 kVA output power with 420 Amps charging capacity. In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a 75 kW / 90 kVA inverter and more than 1200 Amps charging capacity. On-site system configuring, monitoring and control Settings can be changed in a matter of minutes with VEConfigure software (computer or laptop and MK3-USB interface needed). Several monitoring and control options are available: Cerbo GX, Color Control GX, Venus GX, Octo GX, CANvu GX, laptop, computer, Bluetooth (with the optional VE.Bus Smart dongle), Battery Monitor, Digital Multi Control Panel. Remote configuring and monitoring Install a Cerbo GX or other GX product to connect to the internet. Operational data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge. When connected to the internet, systems can be accessed remotely, and settings can be changed. Victron online product page https://ve3.nl/6H

Made with FlippingBook

RkJQdWJsaXNoZXIy MjM2MTk=