3 2024 Video Mr. Fantastic extendable roller EXTENDABLE IDEAL FOR VERTICAL BOW SELF LAUNCHING Made of mirror-polished stainless steel, ideal for Trefoil or similar anchors. Fitted with an innovative gas spring system that moves the anchor away from the bow before being launched. At the same time, a tilting movement lets the anchor drop automatically while keeping it at a safety distance from the bow. The roller has a 22-cm extension stroke and is mainly suitable for vertical bows. Its lightweight and sports shape is well-suited to the hull and its steel frame is designed to withstand high loads. Extensible rollers | Mr. Fantastic Code For anchors kg Extension mm A mm B mm C mm D mm Ø mm Plate thickness mm 01.338.07 7.5 - 10 130 468 357 120 228 8.4 5 01.338.15 10 - 15 200 625 480 120 270 10.4 5 01.338.30 20 - 30 220 750 600 140 310 10.4 8
4 2024 0PM 01.120.07/10/20 01.121.07/10/20 01.120.xx 01.121.xx Bow roller + Trefoil® anchor with anti-water plate AISI 316 SELF LAUNCHING Bow roller fitted with an anchor having a coupling plate that closes perfectly the hole on the hull. This system makes the plate strike against the roller preventing water from leaking into the forepeak. The roller is designed to match the Trefoil anchor for a combination of high-level products in style and performance. The system can be easily installed by 4 studs behind the roller and is fitted with two sheaves for smooth sliding of the chain. Made from 100% mirror-polished AISI316 stainless steel. It is recommended to install it on the chain by means of the Twist joint 01.738.01/02. Windlass ideal pull angle at 5° / 20° from the roller horizontal axis. Bow rollers | Steel rollers | Stainless steel rollers Code Description mm A B C D 01.120.07 Trefoil anchor 7.5 kg 7.5 535 230 352 - 01.120.10 Trefoil anchor 10 kg 10 588 331 383 - 01.120.20 Trefoil anchor 20 kg 20 702 370 468 - 01.121.07 Bow roller 7.5 kg 6.3 150 168 232 322 01.121.10 Bow roller 10 kg 9.3 117 203 279 305 01.121.20 Bow roller 20 kg 12.6 206 224 270 254 Video
5 2024 Cruiser power plug and socket 16A IP67 IEC 60309-5 Marine plug and socket for 16A - 230V shore power cord. Made of PA6, fitted with high energy efficiency contacts and IP67 cover. The plug has an ergonomic grip design and the rotating ring fastens it tightly to the onboard socket with a watertight closure IP67 while the rubber cover ensures an IP44 rating protection when not connected. Simple and compact design for easy installation in any corner of the cockpit In compliance with the IEC 60309-5 European safety standards. PlugsCode Model Material A V 14.416.01 3P socket Pa6 16 230 14.416.02 3P plug Pa6 16 230
6 2024 15.471.01 15.471.11 15.471.02 15.471.12 15.471.01 15.471.12 15.480.29 Saturn cold-water shower REGISTERED DESIGN / DISEGNO DEPOSITATO ONLY COLD Flat hidden design. Horizontal or vertical mounting. Shower housing fitted with anti-vibration washer. The flow is adjusted by touching a push lock button that blocks the water jet and prevents waste. Shower heads | Deck showers | Saturn Code Montage Colour Min. inner space mm Flange Ø mm hose m Carbon shower rod OPTIONAL 15.471.01 Horizontal Chromed grey + white base 230 84 4 15.480.29 15.471.02 Horizontal Chromed grey + chromed base 230 84 4 15.480.29 15.471.11 Vertical Chromed grey + white base 160 120 4 15.480.29 15.471.12 Vertical Chromed grey + chromed base 160 120 4 15.480.29 15.471.01/02 15.471.11/12 Video Saturn PVC bag for shower with vertical mounting base (15.470.11/12 and 15.471.11/12) 15.470.90 PVC bag for shower hose that drains out any water seepage. Easy to install at the back of the Saturn shower with vertical mounting base by means of a metal clamp. The two metal rings on the base of the bag make it possible to fix it to the boat hull in any position you wish. Shower heads | Deck showers | Saturn | Bags |
8 2024 Mickey self-tensioning, modular and independent Bimini system It can be used as sunshade or water protection and is UV-resistant. Simple to assemble, disassemble and store. It can be installed in many different ways. The 15°-inclination basis are small and can be easily in different places of the deck depending on the needs and provide a wider coverage than traditional systems. Much more convenient than the standard systems available on the market (canopy not included). Flexible pole for Mickey system Fiberglass pole covered in carbon fibre with AISI316L stainless steel inserts. Bimini top poles | Flexible poles Code Ø mm Overall height A cm Distance gained with slope B cm Net height from flush deck C cm Recess D cm 46.826.14 16 137 34 129 8 46.826.15 16 153.5 38 145 8 46.826.17 16 170 43 160 8 46.826.18 16 185 47 175 8 46.825.00 46.825.00 46.825.00 Stainless steel fastening bushing for Mickey system Recess-fit AISI316 stainless steel bushing with fastening counter-ring. Available in 3 models. Fastening bushings | Bushings for Bimini top Code Description For poles Ø mm mm min/max deck thichness F mm ØA B ØCØD E 46.825.00 No lid 16 52 40 54 4 26 8/40 46.825.01 Rotary lid 16 58 58 54 5 26 2/50 46.825.02 Watertight lid 16 69 62 54 10 26 2/50 46.825.01 46.825.01 46.825.02 46.825.02 46.825.02 46.825.01 Fastening buckle for Mickey system AISI316 stainless steel buckle for a simpler fastening of the Bimini top to the pole. Fastening buckles | Buckles for Bimini tops Code mm buckle slot mm A B 1 2 46.825.09 74 50 40x5 20x3
9 2024 17.076.20 17.079.05 17.076.22 Style tap, Black series Black finish. It can be mounted inside the sink so the countertop is perfectly clear. TapsCode Function Cartridge 17.076.20 Cold water Ceramic 17.076.22 Hot+cold water Ceramic 17.079.05 Hot+cold water Ceramic 17.076.20 17.076.22 17.079.05 Stainless steel lever latch Mirror-polished AISI316 stainless steel lever latch designed to be used for different applications and to close any peak. The closing pin with eccentric hole can be rotated to reach the closing tension wished. Once installed, the device has a flush design with ergonomic handle for easier use. When open, the closing hook rotates at 180° and doesn’t exceed the handle overall dimensions thus preventing to be hit by mistake. It includes a PVC template for easier installation. Lever latch Code mm Screw size A B C 38.213.00 80 26 13 M4 38.213.01 100 32 16 M5 Flush magnetic door stopper AISI316 FLUSH PATENTED (UTILITY MODEL) 38.155.80 Door stopper with magnet inclined at 18° + ground stopper with embedded plate. When the door gets near the plate, the magnet raises the plate and the stop activates. When not in use, the plate automatically gets back in flat position and prevents tripping over it or any obstacle while passing. Fitted with shockproof and vibration-proof gasket and a set of 2 gaskets (2 mm and 4 mm) to adjust the height of the ground stopper according to your needs. For doors mounted at 4 to 10 mm above the ground. Magnetic door stoppers
10 2024 Easy Up under-platform ladder with handles Fitted with overhanging rungs that make it easy to pull out the ladder and built-in climb-back AISI 316 Stainless steel Automatic handles that open and close automatically when pulling out or closing the ladder Easy to install 43-mm rungs for better comfort
11 2024 Easy Up under-platform ladder with handles AISI316 AUTOMATIC HANDLES Under-platform 4-step telescopic ladder made of AISI316 stainless steel. Fitted with overhanging rungs that make it easy to pull out the ladder and built-in climb-back handles that open and close automatically when pulling out or closing the ladder. 43-mm black plastic rungs for better comfort. Under-platform ladders | Telescopic ladders Code Model Steps Length mm Width (C) mm Tube Ø mm No. Colour open (A) folded (B) 49.577.04 Normal 4 Black 1040 480 440 19/25/32/38 49.578.04 Big 4 Black 1040 480 520 19/25/32/38 Battery-powered Bimini top light MAGNETIC WITH BATTERY LED strip light with magnetic clip. With the new magnetic fastening system, the strip light can be mounted in any position of the Bimini top. The clip is small and can be left on the Bimini top even when it’s folded. The LED light is fitted with a long-duration battery (up to 12 hours), a light intensity control, a battery level indicator and a motion sensor for temporary switching on. Rechargeable via USB cable. Bimini top light | LED lights Code V W LED No of LEDs Battery 13.195.12 5 2 White 60 1300 mAh
12 2024 Ideal for fender lines, dinghies and little boats Dome hidden mini cleat Mirror-polished AISI316 stainless steel Easy to install Compact Dome hidden mini cleat AISI316 Ideal for fender lines, dinghies and little boats. Made of mirror-polished AISI316 stainless steel. Mini cleats | Hidden cleats Code Base mm Bore mm Fastening Breaking load kg 40.135.60 52x46 19 screws 2400 06.336.50 Deluxe rubbing strake AISI316 SOLID S.S. They protect against rubbing of the mooring lines. Made of thick mirror-polished AISI316 stainless steel. Available in two versions: with screws or studs. Large rubbing strakes | Stainless steel Code Length A mm Width B mm Mounting Centre distance mm 06.336.32 320 15 Screws (4) 95 06.336.50 500 15 Screws (6) 95 06.337.32 320 15 M5x40 studs (2) 290 06.337.50 500 15 M5x40 studs (3) 235 06.337.50 06.337.32 06.336.32
13 2024 Delux pull handle The rotary opening system provides a large and ergonomic grip in a reduced space Anti-vibration closing system Flush Recess-fit mounting Large and ergonomic grip Delux pull handle FLUSH ERGONOMIC 38.511.00 Small stainless steel handle. The rotary opening system provides a large and ergonomic grip in a reduced space. For recess-fit mounting. Fitted with anti-vibration closing system. Handles ù Frigo° refrigerator Compact and versatile refrigerators. Easy to install on any boat or vehicle. Convenient freezing compartment that can be pulled out if you don’t need to increase the refrigerating capacity. Internal control panel to adjust the temperature. Fitted with Huayi compressor. Electronic refrigerators | Refrigerators/Freezers Code Volume l V mm OPTIONAL frame width depth height 50.960.00 50 12/24 380 490 530 17 50.960.30 50.960.02 85 12/24 475 545 630 21 50.960.32 50.960.00 50.960.02
14 2024 10.600.01 10.600.04 10.600.02 10.600.03 Installation Magnetic and invisible anchoring system for Cushions FOAM ANCHOR® FOAM ANCHOR® is a intuitive and flexible anchoring system, its installation is very simple and makes any foam cushion magnetic. The FOAM ANCHOR® system consists of a powerful magnetic attachment designed to be inserted/ embedded inside the foam layer of nautical cushions. Once the magnet has been inserted into the foam, the cushion can be attached to any surface that attracts the magnet (FOAM ANCHOR® plates, another cushion with FOAM ANCHOR® or metal bars). The magnetic stainless steel plate that comes with the kit includes a 3M double-sided adhesive disc; in case of need for screw fixing, the plate is equipped with two 4 mm side holes. FOAM ANCHOR® can be used to fix cushions to fixed surfaces such as benches or backrests (10.600.02), but it is also the ideal solution for hooking cushions together (10.600.01), preventing them from moving when you are sitting or lying. The number of magnets to be installed can be chosen based on the desired degree of resistance. Magnetic buttons | Magnetic system Example Diagram Boat area Recommended anchoring system q.ty Inside 2 Cockpit 4 Bow 6 Code Description Use type 10.600.01 2 magnetic anchors (positive/negative) Connect 2 cushions together 10.600.02 1 magnetic anchor plus adhesive magnetic anchor stainless steel plate or for 4 mm screws For attaching the cushion to bulkhead/bench/deck 10.600.03 1 magnetic anchor - 10.600.04 Adhesive magnetic anchor stainless steel plate or for 4 mm screws - 10.600.01/03 10.600.04 3-strand polypropylene line POLYPROPYLENE FLOATING 3-strand lines Colour Breaking load kg Ø mm White Black 06.485.08 06.486.08 500 8 200 06.485.10 06.486.10 750 10 200 06.485.12 06.486.12 950 12 200 06.485.14 06.486.14 1400 14 100 06.485.16 06.486.16 2000 16 100 06.485.xx 06.486.xx DOUGLAS MARINE AISI316 stainless steel bow shield Mirror-polished AISI316 stainless steel bow shield, bored and countersunk. Supplied already bent, it adapts to the different bow shapes when installed. With oversized thickness, it resists even the most violent impacts. Bow shields Code Thickness mm 01.290.01 2 340x520 1.78 01.290.03 2 680x450 3 New products
15 2024 Safe Energy Plus batteries Fitted with double lid that prevents acid leaks from the accumulator in case of overturning. - PbCa alloy expanded grid technology - Oversized thickness plates - Elevated starting capacity - Hi-performance polyethylene bag separator - +30% starting power - 180° overturning without leaks - DUPLEX watertight lid with centralized degassing - Explosion-proof pad - Extremely low self-discharge - Vibration-resistant. Code Ah Rush -18° C V Pole (+) mm length width height 12.480.02 65 640 12 RIGHT 242 175 190 15.6 12.480.03 80 730 12 RIGHT 278 175 190 17.4 12.480.05 95 850 12 RIGHT 310 175 190 20.5 BOS LE300 - Lithium extension for lead-acid batteries MODULAR PLUG & PLAY WITH CONVENTIONAL BATTERIES MADE IN GERMANY The LE300 smart battery system is a lithium extension for 12V lead-acid batteries (AGM, GEL or wet cell). The integrated battery management system takes care of protecting and balancing the lithium cells while monitoring the lead-acid battery. The intelligent distribution of loads and capacity in the LE300 continuously keeps the lead-acid battery at a full charge and therefore extends the battery life. Plug & Play installation: simply connect the system to the plus and minus pole of the existing battery with no need to modify the circuit or the charging technology. The LE300 modules are light, compact and modular, and can be combined up to 24 in parallel, increasing the battery capacity to experience self-sufficiency. Auxiliary batteries | Lithium batteries Code Description Ah total V mm 12.455.02 2 moduls x 25 Ah 50 12 175x229x134 6.8 12.455.04 4 moduls x 25 Ah 100 12 175x229x268 13.6 Download PDF Liontron lithium batteries 7 YEARS WARRANTY INTEGRATED BMS DEVELOPED IN GERMANY Liontron lithium batteries totally replace an AGM or lead battery. They are a lightweight solution still being a large power reserve and offering voltage stability even under very high load. These batteries have been designed to fully meet the demanding requirements of a storage battery. Utmost safety and long duration are granted also by means of total discharge cycles thanks to the lithium most advanced technology. Very long life cycle (over 3000 cycles @ 90%). Possible parallel connection to increase capacity. Fitted with BMS and built-in 4.0 Bluetooth for total control even on your smartphone at all times. Batteries | Current Code V Ah Wh Pole (+) mm Width Height Depth 12.460.01 12 55 704 LEFT 350 162 170 10.85 12.460.02 12 80 1024 LEFT 260 211 171 10.85 12.460.03 12 100 1280 LEFT 344 202 172 15.5 12.460.04 12 150 1920 LEFT 355 262 170 20.8 12.460.05 12 200 2560 LEFT 390 255 233 27.5 New products
16 2024 11.000.24 360° removable light with telescopic pole EXTENSIBLE COLREG72 ABYC-C5 COLREG72- and ABYC-C5-certified for vessels < 20-m long. Mooring light with stainless steel telescopic pole. Extensible from 70 to 120 cm in length, fitted with 360° white light (2 MN visibility). When not in use, the light can be stored in the peak since its size can be reduced. Sold with base plate 11.000.24. Removable lights Code Length cm Light colour V 11.039.90 70/120 Black 12 360° LED foldable pole, with adjustable slope LED ABYC-C5-certified for vessels < 20-m long. Mirror-polished AISI316 stainless steel parts. IP65. ABYC-C5 Navigation lights | Lights | 360° lights | Type- Code Length mm Light material LED-bulb included 11.150.01 36 Black polycarbonate 12 V - 1.2 W 14.286.42 14.286.50/51 14.286.34/36 14.286.24/26 14.286.54/56 WAGO® series 221 splicing connectors with snap opening/closing NO TOOL Ideal easily, quickly and safely connect solid, stranded and fine-stranded conductors. Pull the lever up, insert a conductor and push the lever back down. For a faster and safer electrical system. Mounting carriers are available for every 221 Series Splicing Connector – whether it’s the 2-, 3- or 5wire model. They can be mounted vertically or horizontally. Secure the carrier by snapping it onto the DIN-rail, or with screws on smooth surfaces. Conductors can be conveniently connected and removed before or after inserting a connector into the carrier. Max ambient temperature: 85°C. Connecting terminals | WAGO Osculati code WAGO code Description No of conductors Conductor section mm² 14.286.24 221-412 COMPACT 4 mm² 2 0.14 - 4 14.286.34 221-413 COMPACT 4 mm² 3 0.14 - 4 14.286.54 221-415 COMPACT 4 mm² 5 0.14 - 4 14.286.50 221-500 Fixing support for 4 mm² - - 14.286.26 221-612 COMPACT 6 mm² 2 0.5 - 6 14.286.36 221-613 COMPACT 6 mm² 3 0.5 - 6 14.286.56 221-615 COMPACT 6 mm² 5 0.5 - 6 14.286.51 221-510 Fixing support for 6 mm² - - 14.286.42 221-2411 4-mm² in-line joining connector 2 0.2 - 4 Video New products
17 2024 14.195.82 14.195.80 14.195.81 SCANSTRUT Flip Pro USB-A and USB-C watertight sockets IPX4 waterproof when the cover is closed. Very small size. Available in 3 versions: A+C USB socket, power socket, combo (USB + current socket). Plugs | Watertight sockets | Watertight plugs | Code Description V Max current A Mounting hole Ø mm 14.195.80 A+C USB socket 12/24 6 32 14.195.81 Power socket 12 - 32 14.195.82 A+C USB socket and power socket 12/24 6 2x32 14.195.80/81 14.195.82 Europump Smart 5-diaphragm fresh water pump VARIABLE SPEED Fresh water pump fitted with an electronic system that adjusts the motor speed to the water flow demand without generating any pulsations. Very silent yet having an elevated suction capacity. It can run dry for maximum reliability. Fitted with 3/4” straight hose connector, 3/4” 90° elbow hose connector, 1/2” thread fitting and 3/4” quick coupling filter. Fresh water pumps Code V Flow l/min Current draw A Max pressure PSI/bar 16.515.12 12 18.9 10 70/4.8 16.515.24 24 18.9 5.5 70/4.8 Hyperflow axial electric blower Water-resistant product in compliance with ISO 8846 and CE - RoHs standards. Recommended to aerate and cool down effectively both cabins and engine rooms. Elevated air volume but with a low current draw. Vertical or horizontal installation. BlowersCode V Inlet/outlet m3/min Flow m3/min Current draw A Outlet Ø mm mm OPTIONAL hose 16.175.01 12 7.6 5 6 102 204x152x135 16.104.36 16.175.02 24 7.6 5 3 102 204x152x135 16.104.36 LEWMAR Pro-Sport windlass Rugged aluminium centre case and durable composite side covers. Ideal for boats up to 9 metres. Simple installation requiring only one bore to let the chain through. Fitted with: - Bridge control. - Contactor. - Circuit breaker. - Clutch release lever. - Quick mounting studs. - Template and gasket. - Handbook in 6 languages (Italian included). LEWMAR | V700 | Mooring | Gypsy | Steel Code Motor Gypsy Pull kg Line speed m/min Current draw A Recommended circuit breaker A For boats V W chain Ø mm line Ø mm max continuous max continuous 02.521.06 12 150 6 12 250 63 30 25 20 50 6 to 9 m 6.5 The kit includes: windlass, fixing pins, seal, installation tool, contactor, bridge control and circuit breaker. New products
18 2024 Line Black Eclipse flush latch 38.161.6x/7x - Efficient flush latch with flush design even more elegant in Black Line version New products
19 2024 38.161.01 38.161.62 38.161.02 38.161.61 Eclipse LIFT & TURN flush latch (with compression closure) - SMALL COMPRESSION SYSTEM EXTRA LARGE HANDLE Featuring a very comfortable grip, it offers all the best characteristics in a single flush deck design model. - Flush design. - Large ergonomic handle. - 360° rotation. - Handle can be lowered every 90°. - Open/close indicator. - Ergonomic nut for easy calibration and emergency exit. - Straight cam suitable for sliding doors. - Two-position cam. - Plastic spacer with marks for customized cut. Pull latches Polished SS version Black SS version Lock Outer Ø mm Bore Ø mm Bulkhead thickness mm Stop stroke mm 38.161.01 38.161.61 No 60 50 3-26 22-94 38.161.02 38.161.62 Yes 60 50 3-26 22-94 Spacer included 64 80 54 70 Universal straight cam included Angled cam included Chiave per 38.161.02 Spacer included 38.161.31 38.161.32 38.161.71/72 Key for 38.161.32; 38.161.4x Eclipse LIFT & TURN flush latch (with compression closure) - MEDIUM COMPRESSION SYSTEM EXTRA LARGE HANDLE Featuring a very comfortable grip, it offers all the best characteristics in a single flush deck design model. - Flush design. - Large ergonomic handle. - 360° rotation. - Handle can be lowered every 90°. - Open/close indicator. - Ergonomic nut for easy calibration. - Ergonomic nut for emergency exit. - Straight cam suitable for sliding doors and having two different positions. - Two-position cam. - Plastic spacer with marks for customized cut. Pull latches Polished SS version Black SS version Lock Outer Ø mm Bore Ø mm Bulkhead thickness mm Stop stroke mm Kit No. of latches for kit (same key) 38.161.31 38.161.71 No 75 60 5-36 30-101 No - 38.161.32 38.161.72 Yes 75 60 5-36 30-101 No - 38.161.42 - Yes 75 60 5-36 30-101 Yes 2 38.161.43 - Yes 75 60 5-36 30-101 Yes 3 38.161.44 - Yes 75 60 5-36 30-101 Yes 4 38.161.45 - Yes 75 60 5-36 30-101 Yes 5 64 80 54 70 Universal straight cam included Angled cam included New products
20 2024 39.840.00 39.840.01 39.840.10 39.840.60 39.840.61 Video Rapid Lock system for fenders and bimini tops AISI 316 FLUSH Quick coupling/release system for fast fastening of fenders, Bimini tops, etc. Made of AISI316 stainless steel. When not in use, the recess base is flush with the surface. Fitted with Dyneema ring for fastening to the fender/Bimini top. Quick release | Bimini tops | Fenders | Fastening Polished SS version Black SS version Description mm 39.840.00 39.840.60 Base Rapid Lock Ø 33 x 53 h 39.840.01 39.840.61 Removable part Ø 39 x 30 h 39.840.10 39.840.10 Dyneema ring Ø 7 39.840.01 39.840.00 39.840.60/61 Nordik cleat - Black Line AISI 316 Made of stainless steel with a surface coating that integrates a black layer in the steel cleat whose surface becomes extremely hard and corrosion-resistant. Cleats Code A mm B mm C mm D mm E mm Stud Ø mm 40.137.51 150 45 90 47 30 8 40.137.52 205 55 120 69 35 10 40.137.53 265 70 150 83 40 12 New products
21 2024 40.156.xx 40.155.xx 40.155.xx 40.155.xx Ghost II hidden cleat AISI 316 PERFECT GRIP SMOOTH MOVEMENT Watertight cleat with mounting screws from above. Very smooth operation. Ergonomic lifting handle. Fluorinated rubber O-ring for smooth sliding. ENAVE approved in compliance with ISO 15084:2003. Hidden cleats | Ghost II Polished SS version Black SS version A mm B mm C mm D mm E mm F mm Ø G mm Ø H mm Breaking load kg Mounting OPTIONAL drain pipe 40.155.16 40.156.16 160 38 15 28 47 48 14 24 800 3 x M6 screws 40.155.72 40.155.24 40.156.24 240 52 20 44 70 72 18 32 2050 3 x M8 screws 40.155.74 40.155.31 40.156.31 310 68 25 56 85 93 22 41 5200 3 x M10 screws - 40.156.xx Video 40.156.xx Ghost II hidden cleat Watertight cleat with mounting screws from above. Very smooth operation. Easy grip and ergonomic Smooth sliding and automatic locking Easy installation with mounting from above Working load certificated test New products
22 2024 Spider hinge AISI316 HEAVY DUTY 38.527.01 Polished AISI316 stainless steel spider hinge. Ideal for high-load hatches and pantograph opening systems up to 180°. Its dynamic geometry keeps the hinge far from the seal of the door or hatch. Hatch hinges Spider hinge Ideal for high-load hatches Its dynamic geometry keeps the hinge far from the seal of the door or hatch Pantograph opening systems up to 180o High precision For high loads Video 42.663.00 42.663.00 42.663.10 42.663.00 42.663.20 Polybridge II + EVA folding gangplank made of carbon FPT (technical polyurethane) construction. Anodized aluminium hinges. Wheels with stainless steel case to lift the gangplank. Double pivoting lock. It can be mounted with a single pin to let the gangplank swing, or with two pins for mere tilting (both pins included). The walking surface can be fitted with a white anti-slip cover, or covered in brown or grey EVA. Extra-lightweight folding gangplanks Code Length m Width cm Length when folded m Thickness when folded cm Safety capacity kg Version 42.663.00 2.2 34 1.1 14 140 8 nonslip 42.663.10 2.2 34 1.1 14 140 8 w/brown EVA 42.663.20 2.2 34 1.1 14 140 8 w/grey EVA 42.663.61 2.6 34 1.3 14 140 10 nonslip 42.659.10; 46.659.25; 42.660.25 OPTIONAL fastening bushing 42.663.00 42.663.00 42.663.00 42.663.00 New products
23 2024 52.746.10 27.183.01 27.183.02 GOBIUS C external level sensor MICRORADAR TECHNOLOGY Sensor to be mounted on the outside of the tank. The micro radar technology detects the fluid level without coming into contact with the liquid inside the tank. - It connects to the Bluetooth or BUS networks. - Plug and Play installation. - No need to disassemble the tank. It measures the liquid level from above, no risk of leaks. - It works with any kind of liquid. The Gobius C sensor has to be mounted on the upper side of the tank and its max measuring depth of the tank is 2 metres. It can be connected to control systems and analog devices such as KUS, VDO, WEMA, Faria (10-190 Ohm, 240-33 Ohm, 4-20 mA and 0-5 V). Moreover, it is fitted with 2 single on/off outputs to detect when the tank is empty/full. Installation of the sensor via Bluetooth from your cellphone app for both versions Gobius C (27.183.01) and Gobius C/NMEA 2000 (27.183.02). During the configuration of Gobius C, the user can configure the shape of the tank for a better measuring of the liquids, even in tanks having an irregular shape. For Gobius C/NMEA 2000 (27.183.02), after installation connect the 1-m cable to the NMEA 2000 network and wait for the Gobius C sensor to be detected by the NMEA 2000 system of the boat. The App for iOS and Android systems is available in English, French, German, Italian, Spanish and Swedish. Fuel level sensors | GOBIUS Type of tank Installation Non-drilled plastic tank Apply sensor Gobius C Already drilled plastic tank Plug the hole and apply sensor Gobius C or apply the adapter to sensor Gobius C (27.138.10+27.183.01) Metal tank Drill and apply the adapter to sensor Gobius C (27.138.10+27.183.01) Code Description V Adapter OPTIONAL 27.183.01 GOBIUS C 2.0 12/24 27.183.10 27.183.02 GOBIUS C / NMEA 2000 3.0 12/24 27.183.10 Fender profiles AISI316 Made-in-Italy AISI316 stainless steel C-shaped fender profiles. 3-m standard length, tapered and mirror-polished. Each bar is pickled and passivated for optimum resistance in salty environment. They can be used with dedicated UV-resistant PVC base plates available in white, black and grey, and with dedicated mirror-polished AISI316 stainless steel terminals. Fender profiles Code Description Bore type mm Rods m Borecentre distance White PVC base Grey PVC base Black PVC base SS terminal A B H 44.480.20 Profilo 20 flared 19 1.5 4.6 3 198 44.481.33 44.481.43 44.481.53 44.484.33 44.477.20 Profilo 20 deep-drawn 19 1.5 4.6 3 186 44.481.35 44.481.45 44.481.55 44.484.35 44.480.30 Profilo 28 flared 28 1.5 7 3 198 44.481.36 44.481.46 44.481.56 44.484.36 44.480.38 Profilo 35 flared 35 1.5 9 3 198 44.481.37 44.481.47 44.481.57 44.484.37 Base in 24-m-roll 44.480.xx 44.481.33/43/53 44.481.35/45/55 44.481.36/46/56 44.481.37/47/57 44.484.33/35 44.484.36/37 44.480.20/30/38 44.477.20 44.480.20; 44.481.33/43/53 44.477.20; 44.481.35/45/55 44.480.30; 44.481.36/46/56 44.480.38; 44.481.37/47/57 44.481.xx 44.480.xx; 44.477.20 New products
25 2024 Heavy Duty fender Made of high-quality soft PVC. White body and blue head. Fitted with inflation/deflation valve. Models OF4/OF6 can also be used as hull hauling rollers. 0.15bar max pressure. Buoys | Inflating buoys Code Model cm in cm in 33.212.09 OF1 15 6 61 24 10 33.212.08 OF02 19 7.5 66 26 10 33.212.10 OF2 21 8 61 24 10 33.212.11 OF3 25 10 74.5 29 10 33.212.12 OF4 20.2 8 104 41 5 33.212.18 OF5 26.8 11.5 78 30.5 5 33.212.13 OF6 26.8 11.5 107 42.2 5 33.212.14 OF7 37 14.6 100 39.4 2 33.212.15 OF8 37 14.6 144 57 2 Heavy Duty fender and buoy Made of high-quality soft PVC. White body and blue head. Fitted with inflation/deflation valve. 0.15bar max pressure. Buoys | Inflating buoys Code Model cm in cm in 33.300.12 OA1 29 11.4 38 15 10 33.300.27 OA2 36 14.2 49 19.3 10 33.300.50 OA3 43 17 57 22.5 10 33.300.78 OA4 49 19.19 64 25.6 5 G-fender Pack - set of fender profiles The G-fender Pack comes in a carton display box inside which is a set including: - 4 x deflated fenders - 4 x 1.5-m long and 10-mm diameter lines - 1 x inflating pump - 4 needles for inflation - 1 x bag with carton display. The bag of the G-fender Pack can be used as a display box for self selling or as storage bag on the boat. Inflatable buoys Code Model INCLUDED fender rope retail packaging cm Ø mm length m 33.540.03 OG3 33.539.03 4 pcs 10 1.5 49x21x23 33.540.04 OG4 33.539.04 4 pcs 10 1.5 57x25x25 New products
26 2024 48.410.20 48.410.20 48.410.21 Ergonomic padded seat with RM52 flip-up bolster FABRIC FEELING Rotary moulding plastic core. HD foam padding. Hole in the lumbar area. Soft vinyl upholstery with a central diamond-shaped stitch texture with beige double seams. SeatsCode Type Colour 48.410.20 Coated with high-quality vinyl Dark blue with beige seams 48.410.21 Only padding, ready to be coated - - 48.410.21 Double ergonomic padded seat with H99 flip-up bolster Rotary moulding plastic core. HD foam padding. Hole in the lumbar area. SeatsCode Type OPTIONAL slide rail 48.410.40 With padding, ready to be covered 48.715.00 Twin slides for double seat 48.715.00 Twin slides in anodized aluminium to fasten double seats 48.410.40. Only one of the slides is fitted with release lever for an easier sliding movement. Slides for seats | Seats Electric slide for seats ELECTRIC Made of high-resistance anodized aluminium. Very silent and smooth operation with the 12V electric motor. Electric slides Code Type V 48.716.00 Electric slide 12 New products
27 2024 Giant Heavy Duty black table pedestal Made of black anodized aluminium with black plastic fastening collars for a total black effect. Fitted with gas spring for upstroke, no need to bore the floor for downstroke. Tri-telescopic. Table legsCode Height mm Extra-flat base Ø mm Tube Ø mm Table plate mm OPTIONAL extension kit 48.720.04 345/714 305 100/88/72 305x305 48.724.01; 48.724.02 Thread Lock system 48.417.6 0 48.417.61/63 48.417.6 7 48.417.62 OPTION Thread Lock aluminium table pedestal for tables 48.417.50/51/52 Without upper base, it perfectly embeds into the housing of the tables 48.417.50/51/52. Made of anodized aluminium. The pedestal screws into the base by means of the ingenious and extremely stable Tread Lock system. Floor recessless mounting of the base onto the deck floor, overhang of as little as 20 mm. Table legsCode Height H mm Type A/B/C Pedestal Ø mm For table Finish 48.417.60 685 Fixed 60 48.417.50/51/52 Satin-finish 48.417.61 500/700 Telescopic 60/50 48.417.50/51/52 Mirror-polished 48.417.63 450/700 Telescopic 73/60 48.417.50/51/52 Mirror-polished 48.417.67 450/775 Tri-telescopic 73/60/50 48.417.50/51/52 Mirror-polished 48.417.62 OPTIONAL Only base for 48.417.xx. To be used as table pedestal in the cabin and in the cockpit. 48.417.60 48.417.61/63 48.417.67 48.417.64 48.417.65/66 48.417.68 sistema Thread Lock 48.417.62 OPTIONAL Thread Lock aluminium table pedestal for general tables Made of anodized aluminium. The pedestal screws into the base by means of the ingenious and extremely stable Tread Lock system. Floor recessless mounting of the base onto the deck floor, overhang of as little as 20 mm. Table legsCode Height H mm Type A/B/C Pedestal Ø mm Version Finish 48.417.64 689 Fixed 60 For generic tables Satin-finish 48.417.65 500/700 Telescopic 60/50 For generic tables Mirror-polished 48.417.66 450/700 Telescopic 73/60 For generic tables Mirror-polished 48.417.68 450/775 Tri-telescopic 73/60/50 For generic tables Mirror-polished 48.417.62 OPTIONAL Only base for 48.417.xx. To be used as table pedestal in the cabin and in the cockpit. 48.417.64 48.417.65/66 48.417.68 New products
28 2024 Oval-section climb-up handle AISI316 Oval-section climb-up handle for a better grip. Stud-mounting near the ladder, made of mirror-polished AISI316 stainless steel. This item is sold alone, order 2 pieces if you need a pair. HandlesCode mm Section mm Mounting 49.570.00 403x263 23x33 Studs M8x50 Mini retractable ladder AISI316 Compact built-in telescopic ladder with 3 steps + case to be integrated into the gangplank thickness. Ideal for smaller boats for its compact size. Made of mirror-polished stainless steel. Made in Italy by Douglas Marine. High-precision slip-in/out sliding movement. Built-in ladders Code Steps Length mm Front plate mm Casing mm Type 49.549.63 3 889 307x88 250x460x53 Manual closure EasyOne retractable ladder AISI316 AUTOMATIC HANDLE 4-step recess-fit AISI316 stainless steel telescopic ladder. Fitted with built-in railing that automatically raises and lowers when you rotate the ladder. The railing closing system makes it easier to retrieve the ladder from the gangplank. The ladder has a guided pull-out system for better and more precise sliding. Retractable ladders Code Steps Length mm Front plate mm Casing mm Type 49.570.04 4 1156/1367 455x112 395x550x73 Manual lock New products
29 2024 AUTOTERM diesel-powered air heater Autoterm air heaters are independent, diesel-powered heating systems that can be easily installed on your boat or vehicle. They are excellent products for spaces which need to be heated or dehumidified quickly. Equipped with built-in fail-safe systems and sensors that will automatically shut down the heater if any errors occur. Accessories included: - Fuel pump cable with connector. - Intake hose with silencer. - Fuel dosing pump. - 1.8-m control panel cable. - 24-mm Ø thermal isolation. - Silencer/muffler with mounting kit. - 1-m exhaust pipe. - 1.5-m nylon hose for fuel. - Mounting bracket. Air heaters Code Model Recommended for boats (m) V Power kW Heating capacity m3/h mm Mediterranean climate Northern climate 50.252.12 AIR 2D 8-10 7-9 12 2 86 310x119x145 2.9 50.254.12 AIR 4D 10-12 8-10 12 4 168 402x157x188 5.5 50.254.24 AIR 4D 10-12 8-10 24 4 168 402x157x188 5.5 50.255.02 50.255.03 50.255.01 Skin fittings Skin fittings with 24-mm diameter intake hose. Made of AISI316 stainless steel. Skin fittings Code Type Tube Ø mm Material 50.255.01 Standard 24 SS 316 50.255.02 With bent 24 SS 316 50.255.03 Slanted 24 SS 316 50.251.01/02/03 50.251.11 50.251.12 AUTOTERM control panel for air heaters Digital or analogic control panels are available depending on the requirements. The extension cord is compatible with both versions. Max length of the compatible cable: 11.8 metres (5 m + 5 m + 1.8 m already included). Accessories for heaters Code Control panel Language OPTIONAL 5m-extension cable 50.251.11 Analogic ALL 50.251.12 50.251.01 Digital EN-DE-PL 50.251.12 50.251.02 Digital EN-ES-IT 50.251.12 50.251.03 Digital EN-FR-NL 50.251.12 AUTOTERM installation and air distribution kit for air heaters To install a heater, choose a air distribution kit depending on the type of burner chosen and the number of air vents you wish to install. The kits include all the accessories needed for installation. Heater kits Code Heater Outlets Open outlets Adjustable and closable outlet Connettors hose Yshaped Tshaped length m Ø mm 50.252.62 AIR 2D 2 1 1 1 - 5 65 50.252.63 AIR 2D 3 1 2 1 - 8 65 50.254.63 AIR 4D 3 1 2 1 1 8 90 50.254.64 AIR 4D 4 1 3 2 1 10 90 New products
30 2024 Gas hob with glass top GAS NON ELECTRIC Innovative hob for boats: safe, easy to use, ecologic and stylish. The burners are placed under the glass top and heat the surface so that the flame burns safely even in outdoor and windy places. Designed to be installed even on boats without a generator. Gas hobs Code No of burners mm V Power kW Current draw W 50.601.02 2 460x280x70 12 2.4/2.8 15 4.8 50.601.12 2 545x450x70 12 3.8/4.4 17 10.2 Touch control glass ceramic hob unit Glass ceramic cooktop, hi-ligth units, touch controls with 9 heating levels. Glass ceramic resistant to high temperatures. Residual heat indicators, fast and easy cleaning. Heat up technology: after choosing the max heating level, you can set a second level the system will switch to after reaching the max heating power for a preset period of time. This function is ideal to heat up soups while reducing the current draw. All hob units are fitted with touch controls and child restraint system. At the touch of a key, all settings are reliably locked thus preventing any misuse. Touch-control | Kitchens Code No of burners V mm Burners W Ignition outside recess 50.707.82 2 220 505x300 482x282 1800 - 1200 Touch-control Universal removable pot holder set with flush base 50.707.00 The adjustable arms adapt to any type of pots and pans. Made of AISI316 stainless steel and PA6 nylon (V0 fire rating flame retardant plastic). Flush base to be installed on hobs or 2- to 42-mm thick kitchen tops. Satin-finish stainless steel electric barbecue Stainless steel surface. Black enamel cast iron grid. Overheat prevention circuit. Barbecues Code V Power W mm external recess 50.709.09 220 2400 510x305 482x282 New products
31 2024 TECMA electric toilet bowls Tecma products feature ultra quiet operation, reliable systems, low consumption in terms of power and water (0.5 to 2.7 litres per cycle), fast installation and high-quality components. The product range comes in different lines and formats to suit all needs still offering the same technology and respecting the installations design restrictions. 50.227.07/08; 50.227.17/18 50.227.00/01/05/06; 50.227.10/11/15/16 Touch Panel 50.226.51 All in one Panel 50.226.50 Built-in bidet Built-in bidet TECMA Silence Plus 2G electric toilet bowl The second generation of Silence Plus ‘big bowl’ model. The length of 51 cm creates the at-home seating feeling. Made-in-Italy white ceramic, soft-close thermosetting plastic board that covers the seat. Control panel included. Fitted with solenoid to bypass the onboard plumbing. For installation with sea water inlet pump, order code 16.525.12 / 16.525.24 or similar ones. Toilets | Bathrooms | Sanitary fixtures | Electric Model V mm height width depth Silence Plus 2G Short Deep Bowl 12 360 397 513 23.5 Silence Plus 2G Short Deep Bowl 24 360 397 513 23.5 Silence Plus 2G 12 460 390 510 25.5 Silence Plus 2G 24 460 390 510 25.5 Silence Plus 2G 12 460 390 510 25.5 Silence Plus 2G 24 460 390 510 25.5 WC Model Built-in bidet Installation All in one panel Touch panel 50.227.07 50.227.17 Silence Plus 2G Short Deep Bowl No Under the floor 50.227.08 50.227.18 Silence Plus 2G Short Deep Bowl No Under the floor 50.227.00 50.227.10 Silence Plus 2G No Above the floor 50.227.01 50.227.11 Silence Plus 2G No Above the floor 50.227.05 50.227.15 Silence Plus 2G Yes Above the floor 50.227.06 50.227.16 Silence Plus 2G Yes Above the floor All models can be ordered in ivory or black, and can have a built-in bidet function 50.227.07/08; 50.227.17/18 50.227.00/01/05/06; 50.227.10/11/15/16 50.227.20/21; 50.227.30/31 50.227.24/25; 50.227.34/35 TECMA Elegance 2G electric toilet bowl The second generation of Elegance 2G is the ‘small bowl’ model. The length of 43 cm maximizes comfort within reduced spaces onboard. Made-in-Italy white ceramic, soft-close thermosetting plastic board that covers the seat. Control panel included. Fitted with solenoid to bypass the onboard plumbing. For installation with sea water inlet pump, order code 16.525.12 / 16.525.24 or similar ones. Toilets | Bathrooms | Sanitary fixtures | Electric Model V mm height width depth Elegance 2G Short Deep Bowl 12 355 377 434 23.5 Elegance 2G Short Deep Bowl 24 355 377 434 23.5 Elegance 2G 12 460 370 430 25.5 Elegance 2G 24 460 370 430 25.5 WC Model Installation All in one panel Touch panel 50.227.24 50.227.34 Elegance 2G Short Deep Bowl Under the floor 50.227.25 50.227.35 Elegance 2G Short Deep Bowl Under the floor 50.227.20 50.227.30 Elegance 2G Above the floor 50.227.21 50.227.31 Elegance 2G Above the floor All models can also be ordered in ivory or black with built-in bidet function. 50.227.20/21; 50.227.30/31 50.227.24/25; 50.227.34/35 All in one Panel 50.226.50 Touch Panel 50.226.51 New products
32 2024 14.691.04 14.691.06 14.691.04/06 14.691.06 14.691.90 Settable electric touch panel with CAN-BUS MODULAR BACKLIGHT AUTOMATIC FUSE Touch modular panel made of glass and with backlit symbols. It comes with 40 stickers indicating the different functions and to be applied under the glass so that the surface is smooth and gives a printlike effect. Every switch can be set in 3 different modes: - Traditional ON-OFF: press a key to activate/deactivate the relating function. Ex. COCKPIT LIGHTS ----------------------------------------------- - Temporary (ON)-OFF: this function is active only when the key is pressed. Ex. 1: switch – HORN Ex. 2: switches – WINDLASS UP/DOWN ----------------------------------------------- - ALTERNATE ON-OFF: two keys can be set to activate a function and deactivate another one and vice versa. Ex.: BILGE PUMP IN MANUAL/AUTOMATIC MODE. ----------------------------------------------- The keys are backlit in yellow when in standard mode, in blue when the function is active and in red in case of short circuit. The panels are designed to be modular: if placed side by side in vertical and/or horizontal position, they look like a single built-in panel with 4, 6, 8 (4 + 4), 10 (6+4), 12 (6 + 6) switches and so on. The connection between the CAN-BUS and the panel is wired by means of a quick fitting. 1.5-m cable and another 1.5-m extension cord can be added. The MOSFET module is a protection against overloads and voltage inversions. The CAN-BUS is fitted with 4 or 6 thermal fuses that activate in case of short circuit (function key lit in red). The fuse can be reset automatically once the short circuit has been solved and the key is then lit in yellow. CE-certified panels, IP67 protection degree. Modular panels Code No. of switches V Circuit breaker power panel mm Installation bore Ø mm control box mm 1.5-m extension cable 14.691.04 4 12/24 1x5A; 2x10A; 1x15A 62x62x10 16 100.5x152 14.691.90 14.691.05 4 12/24 2x10A; 2x20A 62x62x10 16 100.5x152 14.691.90 14.691.06 6 12/24 2x5A; 2x10A; 2x15A 93x62x10 16 100.5x152 14.691.90 65.894.01 65.894.04 PROPGLIDE® foul-release coating MADE IN USA PropGlide™ is a foul-release coating that when applied to your propeller(s) and running gear will increase fuel efficiency and the performance of any vessel. This super slick coating keeps your propellers clean from marine growth for extended periods of time, reducing the resistance caused by incrustations on the propeller and on the running gear. Higher RPM and vessel for better efficiency of the engine. PropGlide® is not a prop antifoulant and it contains no harmful biocides. Easy to apply for Do-It-Yourselfers and not just for the professional applicator. PaintsCode Description Content ml Traditional application No of props No of blades Prop Ø or HP Primer Hardener for primer Clear paint 65.894.01 175-ml kit 60 15 100 Sailboats or small/medium displacement yachts 1 - up to 75 HP 65.894.02 250-ml kit 120 30 100 Large sailboats or displacement yachts 1 - over 75 HP 33-60 cm Single sterndrive 1 3-4 33-60 cm 65.894.03 625-ml kit 300 75 250 Large displacement yachts 1 4-5 60-90 cm Double sterndrives 2 3-4 33-60 cm 65.894.04 1250-ml kit 2 x 300 2 x 75 250 Large displacement yachts 1 5-7 90-120 cm Double sterndrives/duo prop 2 4-6 60-120 cm Propellers + shafts and wheels 2 3-4 33-60 cm New products
33 2024 52.198.01/02/03/04 52.198.05/06 Liquid flexible water tank HEAVY DUTY EASY INSTALLATION Food-grade PVC water tanks. Made with food-grade terephthalate-free PVC fabric, they easily adapt to bilge and peak spaces. The resistance of the fabric and the high-strength double weld ensure long duration in time. They are fitted with 2 welded vents with G 1 ½, male thread. Fitted with hose connector swivel nuts (38-mm Ø for intake and 16-mm Ø for draining). Fix the tank to metal eyelet during installation. Tanks | Water tanks Code Litres cm 52.198.01 55 69x72 - 52.198.02 100 69x110 - 52.198.03 150 69x136 - 52.198.04 210 69x177 - 52.198.05 55 107x94 triangular 52.198.06 100 131x102 triangular H2O / fuel tap plug for stainless steel, plastic and aluminium tanks Made of nylon, fitted with a stainless steel tap plug elbow-shaped hose. Easy to fix on any flat surface by boring a 5-cm hole. Code Version 52.199.02 Pipe Ø 12 mm, length 56 cm, bore Ø 50 mm 52.199.14 Pipe Ø 14 mm, length 84 cm, bore Ø 50 mm High-Tech shock cord High-quality latex core elastic cord coated in abrasion-resistant polyester. This combination makes the cord compact, stable and durable. Sold in retail package to be hung. Elastic cables | Cables Code Ø mm Length mm Colour 63.174.05 5 10 White/Blue 63.174.06 6 10 White/Blue 63.174.08 8 10 White/Blue 63.174.10 10 5 White/Blue White gelcoat spray SPRAY Single-component gel coat for fast finish of fiberglass surfaces. It makes porous surfaces even and the result is a satin-finish in the colour applied. Gelcoat | Spray Code Package 65.520.11 400 New products
34 2024 SCANSTRUT Low Profile stuffing box It offers perfect watertightness (IP68) for cable passing and lets the cable pass without disassembling end connectors, if any. Threaded holes for easy installation, it can disassembled endless times. Each piece is supplied with a choice of bored or to-be-bored seals for easy and flexible use. The overall height of the Low Profile range is 70% shorter in comparison with the standard range stuffing boxes for a cleaner and more refined result. Vertical and horizontal installation. 100% watertight. Marine sealant not needed. Packed in a convenient display blister. Scanstrut SS Black anodized aluminium Cable Ø mm Max connector Ø B Ø A 14.177.01 14.177.11 2-8 16 49.9 14.177.02 14.177.12 4-9 21 60.7 14.177.03 14.177.13 9-14 21 60.7 14.177.04 14.177.14 9-14 30 75.6 14.177.05 14.177.15 up to 15 - - 14.177.01/02/03/04 14.177.11/12/13/14 14.177.05 14.177.15 14.177.01/02/03/ 11/12/13 14.177.05/15 ATMOS Integrated Air station 12V inflator IPX6 INFLATE/DEFLATE IGNITION PROTECTION The ATMOS onboard built-in inflator combines an elevated air flow and high-pressure capacity (20 psi / 1.37 Bar) and is therefore ideal for any kind of inflatable: tenders, SUPs, towables. It is IPX6 watertight and is designed to resist the most challenging marine weather conditions. Its newgeneration technology inflates and deflates rapidly and effortlessly. Compact and with reduced depth, ATMOS adapts to almost all the panels on board. Supplied with a 2.5-m inflating hose and a fitting-valve universal kit. Handy and ready to use, just set the target pressure on the display and start it: the inflator automatically stops when the set pressure is reached. ATMOS is ignition-protected certified (standard ISO 8846) so that is can be installed in area where flammable gases or fuel are stored. It complies with the directive EMC CE-RED (2014/53/UE) and the standard EN 62368. It comes in a practical and resistant storage bag. Average inflating time for SUPs: 6 to 8 minutes. Certifications: CE, ROHS, UN ECE R10, UKCA. It complies with the following standards: ISO 8846 and SAE J1171. Electric inflators | Inflators for SUP | Inflation | Code Scanstrut code Function V W A Max pressure Flow rate / Pressure Installation angle mm 66.452.01 SC-AOB-A2 Inflation + deflation 12 140 12 1.37 BAR (20 PSI) Flow rate 350 l/m (0-1 PSI) - Flow rate 70 l/m- (1-20 PSI) +10° to -30° 297x123 x198 New products
35 2024 66.446.35 66.446.35 VA NX inflating valve EASY MAINTENANCE VA NX is smaller than other valves currently available on the market. Its main feature is that the valve body can be replaced without removing the external part glued to the inflatable (only the internal valve is replaced). Valves | Inflating | Deflating Code Color Fabric thickness mm A mm B mm Bore Ø mm Nominal flow l/min 66.446.35 Grey 0.5 - 3.5 69 42 43 2000 66.446.36 Black 0.5 - 3.5 69 42 43 2000 66.446.37 Chromed 0.5 - 3.5 69 42 43 2000 66.446.38 - Valve body only - - - - - 66.446.46 Spanner kit including: universal spanner 66.446.45 + specific spanner for VA NX valve tightening 66.446.46 66.446.36 66.446.37 66.446.38 22.504.01 22.504.02 VersaChock removable dinghy holders MADE IN USA UNIVERSAL Easily removable holders for dinghies, jet skis and water scooters. To be fixed on stern gangplanks, flybridge or on the deck. 4 low and rounded base plates are fixed to the boat while the holders can be easily removed to clear the deck from obstacles. Brackets and base plates made of powder-coated aluminium. HDPE holders + rubber profile. Removable dinghy holders | VersaChock Code Version Capacity kg Max horizontal load kg Notes holders WxDxH mm 22.504.01 Tender Chocks 560 230 - 225x150x25 22.504.02 Tender Chocks Heavy Duty 560 230 Double width holder for better weight distribution on the hull 225x150x50 VersaChock davit and dinghy holder MADE IN USA TILTING Its tilting movement makes it easier to haul the dinghy. Automatic block system when the tender reaches the horizontal position. End-of-course belts included to limit the inclination angle. It can be paired with manual or electric winches. Easily removable system. Small tool to always keep at hand and connected. Anti-fall strap included. Removable dinghy holders | VersaChock Code Version Capacity kg WxDxH mm 22.504.03 Dinghy Davits with wheel 3G 160 1194x77x175 New products
36 2024 01.119.50 01.119.51 ITALWINCH steel chain stopper Chain stopper compatible with the most common chains (8- to 14-mm diameter and locking pin). Made of 100% AISI316 stainless steel. Code Base mm For chain Ø mm 01.119.50 110x62 8mm ISO - 8 mm DIN 766 - 10mm ISO - 10mm DIN 766 01.119.51 130x85 12mm ISO - 13mm DIN766 - 13mm DIN 764, 14mm ISO - 12,5 C.T., 14 C.T. 02.534.12 02.534.14/16 02.534.18 V700 spares Code Description 02.534.10 Chain feeder kit 02.534.12 Cover 02.534.14 Fastening kit (in inches) 02.534.16 Fastening kit (in metres) 02.534.18 Full Safe Kit 02.534.20 Gasket and bearing kit 02.534.22 Mast kit 02.534.24 Engine kit 02.534.26 Gear case 02.534.28 Gear complete kit 02.534.34 Magnet and sensor kit 02.534.20 02.534.22 02.534.24 02.534.34 02.534.26 02.531.78 02.531.80 02.531.82 02.531.84 Pro-Series 1000 spares Code Descritoion 02.531.78 Chain expulsion kit 02.531.80 Side cover gasket 02.531.82 Engine kit 02.531.84 Gasket and screw kit 02.590.12 02.590.14 02.590.07 02.590.08 02.590.10 02.590.16 Spare parts series VX,VXL,HX VX,VXL,HX | Solenoid | Switches | Gypsy | Code Description 02.590.07 12V watertight remote control switch 02.590.08 Lewmar toggle switch with protection 02.590.10 VX windlass chain cover and control arm 02.590.12 VX1 12V 500W motoreducer IP67 RMU40 02.590.14 VX2/3 chain cover kit 02.590.16 VX2/3 manual conversion kit 02.590.18 Manual retrieval for VX2/3 gypsy only 02.590.20 VX2 12V 700W motoreducer IP67 RMU50 02.590.22 VX2 12V 1000W motoreducer IP67 RMU50 02.590.96 VX1/VX1L 6/7mm gypsy 02.590.98 VX1/VX1L 8mm gypsy 02.593.80 VX2/3 10mm gypsy kit, DIN766 02.593.90 VX2/3 10mm gypsy kit, ISO 02.593.96 VX2/3 7mm gypsy kit 02.593.98 VX2/3 8mm gypsy kit 02.590.20/22 02.590.18 New products
www.osculati.comRkJQdWJsaXNoZXIy MjM2MTk=