557 Engine instrumentation and systems 27 NEW GOBIUS level indicators GOBIUS PRO level sensor - Bluetooth BLUETOOTH UP TO 9 SENSOR Sensor to be mounted on the outside of any tank whose vibrations indicate the inside level. - It can be mounted on tanks of any materials. - It works with any kind of liquid. - Easy to install without drilling the tank (no leaks or bad smell). - 1 to 9 sensors can be installed per tank (each sensor indicates one step). 1 single sensor is recommended to report 3/4 black water or water/fuel reserve. Gobius Pro can be programmed via Bluetooth and it can be connected to a warning light, relay or buzzer. It can be read also via Bluetooth (App available for download on your smartphone or other devices). App languages: English, Italian, French, German, Norwegian, Swedish. Code Description V No. of sensors 27.182.01 GOBIUS PRO 1 12/24 1 External level sensor bluetooth GOBIUS C MICRORADAR TECHNOLOGY Sensor to be applied on the outside of the tank, with micro radar technology that detects fluid levels without coming into contact with the contained liquid. - connects to Bluetooth or BUS networks; - Plug and play installation - no need to dismantle the tank, measures the liquid level from above, with no risk of leakage; - works with all types of liquids. The Gobius C sensor is mounted on the top part of the tank and the maximum measuring depth of the tank is 2 meters. The Gobius C 2.0 Analogue Sensor (27.183.01) can be connected to control systems and analogue instruments such as KUS, VDO, WEMA, Faria (10-190 Ohm, 240-33 Ohm, 4-20 mA and 0-5 V). Additionally, there are two single on/off outputs to indicate when the tank is empty or full, ensuring a continuous analogue signal. The Gobius C Basic (27.183.03) is the entry level model of the range. Compared to model 27.183.01, it does not provide a continuous analogue signal; it only indicates discrete levels (on/off). Ideal for simple applications where you only want to know if the tank is full, half full or empty, without the need to connect it to external instruments. The installation for all versions Gobius C (27.183.01), Gobius C / NMEA 2000 (27.183.02) and Gobius C Basic (27.183.03) is carried out via the phone using Bluetooth through the app. During the initialisation of the Gobius C Sensor setup, the user can configure the tank's shape to ensure accurate liquid measurement, even for tanks with irregular shapes. For the Gobius C / NMEA 2000 version (27.183.02), after completing the installation, the cable (length 1 m) must be connected to the NMEA 2000 network and wait for the Gobius C sensor to be identified in the boat's NMEA 2000 system. The application for iOS and Android systems is available in English, French, German, Italian, Spanish, and Swedish. Tank type Type of installation Unperforated plastic tank Application of GOBIUS C Sensor Plastic tank already drilled Seal the hole and apply the GOBIUS C sensor or attach the adapter to the GOBIUS C sensor (27.183.10+27.183.01) Metal tank Drill and attach the adapter to the GOBIUS C sensor (27.183.10+27.183.01) Code Description V Optional adapter 27.183.01 GOBIUS C 2.0 Analogue 12/24 27.183.10 27.183.02 GOBIUS C / NMEA 2000 3.0 12/24 27.183.10 27.183.03 GOBIUS C BASIC 12/24 27.183.10 \ 27.183.01 \ 52.746.10 \ 27.183.02 \ Specification \ 27.183.03 Gobius C adapter for metal tanks Code 27.183.10 Special adapter for mounting the sensor on a metal or other material tank with an existing hole. For tanks using S3 flange, just mount the Gobius C with this adapter. For S5 flanges, pair the Gobius C adapter with the mounting flange code 52.746.10.. The adapter is screwed into the existing "Wema & KUS" brackets, 1.25″ SAE 5. The sensor is then mounted on the adapter using the supplied 3M tape. All included: Adapter + 3M tape + o-ring for sealing.
RkJQdWJsaXNoZXIy MjM2MTk=