860 Bimini tops 46 \ 1 \ 1 \ 2 \ 1 \ 3 \ 4 INDOOR sea cover Polyethylene sheet to protect boats in marinas. Supplied in 50-m rolls with continuous elastics on the outer sides. It comes in rolls of 50 m, with two continuous elastics inserted on the outer edges. Installation instructions 1) Unroll the cover from stern to bow, keeping central to the vessel, leaving an excess of about 50 cm on each side. 2) Apply two ties spaced about 30 cm apart and cut the covering used from the rest of the coil. 3) Extract the elastics and tie them. 4) Open the cover on the vessel. 5) Pull the elastic from one end and tie it to keep it under tension. 6) Use the specific pre-cuts with reinforcements if necessary to connect the transverse perimeter elastic. Code Cover width m Roll length m 46.174.00 4 50 46.174.01 6 50 46.174.02 8 50 46.174.03 10 50 46.174.04 15 50 \ 5 \ 6 Marine heat-shrink covering White polyethylene heat-shrink film. Special additive for UV-ray resistance. Ideal covering to protect whatever boat from dirt, minor impacts, high temperature, etc. during laying up/transport. Easy application by spreading the product from bow to stern and heating it up with the dedicated heat guns. Product sold in rolls (price depends on weight). Code Film width m Roll length m Roll height m Thickness mm Approximate weigth kg Bending UV ray resistance 46.176.07 6 50 1.5/1.6 0.2 62 bellowsbending 12 months guaranteed 46.176.08 8 50 1 0.2 77.7 multiple bending 12 months guaranteed 46.176.10 10 50 1.25 0.2 97.1 multiple bending 12 months guaranteed 46.176.12 12 50 1.5 0.2 116.5 multiple bending 12 months guaranteed 46.176.14 14 50 1.75 0.2 135.9 multiple bending 12 months guaranteed 46.176.17 16 50 2 0.2 161 multiple bending 12 months guaranteed \ 46.176.07 \ 46.176.08/10/12/14/17
RkJQdWJsaXNoZXIy MjM2MTk=