305 Bilge pumps, impellers, pressure vessels 16 JABSCO - FLOJET fresh water pumps FLOJET self-priming fresh water pump fitted with 3 valves 3-diaphragm version, it can run dry without damage. Quiet operation, pulsation-dampening bypass. 4 fittings (2 x 1/2" threads and 2 x 14-mm with 1/2" hose adapters) and inlet strainer. Code V Flow l/min Current draw A Maximum Pressure Bar mm 16.206.12 12 2.5/7.5 1.9 1.5 101x101x152 2 16.207.12 12 2.5/11 2.9 1.5 127x127x152 2 FLOJET self-priming fresh water pump fitted with 4 valves It can run dry without damage. 4-diaphragm inlet system to prevent vibrations. Special internal bypass that protects the pump against incoming overpressure when the pump is connected to the ground water supply network. Permanent magnet motor fitted with shaft bearing. Code V Flow l/min Current draw A Self-draining up to m Fittings mm 16.440.50 12 From 3,8 to 14,7 2.8 1.80 1/2” threaded bayonet fittings 97x156x207 2.1 JABSCO Washdown Par-Max 6 Plus pump kit Ideal for washing down, this kit includes a Par-Max HD6 pump (increased pressure 4.8 bar), a 90°-strainer and a trigger nozzle. Code V Flow l/min Maximum Consumption A Maximum Pressure Bar Fuse A Fittings mm 16.437.01 12 23 20 4.8 25 2 x 3/4” hose adapters + GHT 3/4” adapter 259x119x129 16.437.02 24 23 10 4.8 15 2 x 3/4” hose adapters + GHT 3/4” adapter 259x119x129 JABSCO Par-Max HD fresh water pump Constant flow, very silent, self-priming up to 3 m, sealed manostat tested for up to 4 million cycles. The pump can run dry without getting damaged. IPX6 watertight in compliance with ISO 8846 standards. Fitted with 1/2" snap fittings. Code V Flow l/min Maximum Consumption A Maximum Pressure Bar Fuse A mm 16.436.01 12 15 10 2.8 15 259x119x129 3.5 16.436.02 24 15 5 2.8 10 259x119x129 3.5 16.436.03 12 23 15 2.8 25 259x119x129 4 16.436.04 24 23 7 2.8 15 259x119x129 4 Pressure switch for FLOJET fresh water pumps (switch assembly) Code For pumps 16.901.04 16.440.50 16.901.18 - 16.901.21 16.207.12 Spare fittings for FLOJET pumps Code Dimensions Type 16.204.06 1/2" hose adaptor for clamp mounting 2 16.204.07 1/2" thread 2 Flojet washable water strainers Version A: plug-in right-angle fittings for the Flojet pump inlet. 40-mesh strainer for fresh water and general purposes. Version B: in-line fittings and fastening support. Universal size for any pump or fresh water pump. Code Version Fittings mm 16.408.02 A plug-in fitting + 19mm hose adaptor 70x57 16.408.03 A plug-in fitting + 1/2" thread adaptor 70x57 16.408.05 B 2 from 12 mm 70x57 16.408.06 B 2 x 19mm fittings 70x57
RkJQdWJsaXNoZXIy MjM2MTk=