1075 Winch handles, furlers 57 Universal winch handle holder Made of black nylon, suitable for winch handles; 3-screw mounting, used instead of PVC pockets. Code Base Ø mm Overhang mm 57.635.70 52 26 Jib furlers and spreader covers Self-adjusting spreader boots with aerodynamic profile Made of soft thermoplastic, designed for round- and wing-section crosstrees. Fast to mount by means of our self-amalgamating tape 65.115.01 or similar. Code For cables up to mm For crosstrees, max section mm External dimensions mm 57.492.01 4 38x13 114x45x48 2 57.492.02 6 57x17 145x65x60 2 57.492.03 8 83x25 190x93x71 2 Self amalgamating tape for spreader boots Made of soft UV-resistant plastic material; easy to remove when worn out. Code Colour Roll 57.374.00 light grey 25 mm x 10 m “Sailguard” sail savers Made of white nylon; easily installed without dismounting the shrouds; supplied in an elegant package. Code Suitable for 57.373.40 2 stays up to 9 mm Sea Sure jib furling system with manual return line Made of stainless steel, fitted with nylon pulley. Designed to guarantee full reliability. The drum is closed and protected thus avoiding the line from getting stuck or twisting when opening and closing. It consists of stainless steel bearings for perfect functioning even when the forestay is under maximum tension. It is only 50-mm high thus allowing to install the jib very low, just above the deck in order for the sail to be fully efficient. It can also be mounted below deck by using an additional stainless steel extension hose. The jib furling system can wind up to 3.5 mm of 3-mm diameter line thus allowing the use of sails with approx. 3-mm long lower rim (length from tack to sheet). This length is shorter in case of lines with larger diameter. Code Suitable for Ø Drum mm 57.299.00 All types of keels 69 116 Sea Sure swivel Code Description 57.295.00 Made of stainless steel, for furler, integrated stainless steel bearing
RkJQdWJsaXNoZXIy MjM2MTk=