1049 Tanks, propellers, impellers 52 Large rigid tank for drinkable water In food-grade linear polyethylene. Tasteless and odourless. Supplied complete with inspection cap and provisions for loading, unloading, and venting. Possibility of modular installation of multiple tanks, thanks to the preparation of a connection nipple. All female fittings in the plastic moulded. Code Capacity l Length x width mm Height mm Standard thickness mm +/- 5%* 52.173.01 215 1000x400 600 6 52.173.03 390 1300x400 800 7 52.173.04 390 1300x400 800 7 52.173.08 350 1620x520 510 8 52.173.09 600 2430x520 510 9.5 52.195.20 165 900x600 400 6 52.195.22 240 870x785 405 6 Symbols: A=1" - B=1"1/4 - C=1"1/2 - D=3/4 - IS=Inspection * Our fresh water tank thickness is calculated for standard use of tanks to be installed on leisure boats. The installer or the designer shall be responsible for checking that both the tanks and their mounting systems comply with the required use. Technical support shall be requested, if necessary. The option to require on demand tanks increased in thickness. \ 52.173.04 \ 52.195.20 \ 52.173.01 \ 52.173.03 \ 52.173.09 \ 52.195.22 \ 52.173.08 \ 52.173.01 Rigid modular tank for drinkable water Made of linear food-quality polyethylene. Fitted with inspection plug and multiple ports for filling, draining, venting with 1" 1/4, 3/4", 1" female threads. Ready to fit a level indicator with 5-bore VDO flange (27.160.xx; 27.161.xx; 27.166.xx). Prepared for level indicator installation with VDO 5-hole flange (27.160.xx; 27.161.xx; 27.166.xx). Code Capacity l Base mm Height mm A - Vent Ø mm B - Filler cap Ø mm C D Standard thickness mm +/- 5%* 52.194.80 172 700x500 600+25 16/20 38/50 3/4" 1"1/4 5.5 52.194.81 247 1000x500 600+25 16/20 38/50 3/4" 1"1/4 7 52.194.82 343 1400x500 600+25 16/20 38/50 3/4" 1"1/4 7 52.194.90 170 500x600 700+25 16/20 38/50 3/4" 1"1/4 6 52.194.91 236 500x600 1000+25 16/20 38/50 3/4" 1"1/4 7 * Our fresh water tank thickness is calculated for standard use of tanks to be installed on leisure boats. The installer or the designer shall be responsible for checking that both the tanks and their mounting systems comply with the required use. Technical support shall be requested, if necessary. The option to require on demand tanks increased in thickness. \ 52.194.80 \ 52.194.81 \ 52.194.82 \ 52.194.90 \ 52.194.91 \ 52.194.80 \ 52.194.81 \ 52.194.82 \ 52.194.91 \ 52.194.90
RkJQdWJsaXNoZXIy MjM2MTk=