1048 Tanks, propellers, impellers 52 Water tanks Fresh water rigid tank, rectangular version In white polyethylene standard version with rectangular section. Suitable for installation in the central part of the hull or under the bow bed. Supplied complete with inspection cap and 4 blind threaded holes from 1/2” - 1”1/4 where the loading/unloading hose connectors, vent (see various models at group 17), must be ordered separately. Code Capacity l Base mm Height mm Standard thickness mm +/- 5%** 52.194.49 54 700x400 200 4 52.194.50 47 480x400 260 4 52.194.51 70 710x400 260 4 52.194.69 105 900x400 300 4.5 52.194.70 80 700x400 300 4.5 52.194.71 119 880x500 300 4.5 52.194.72* 170 880x500 - 880x400 400-500 5 * It can be rotated at 90° and used with height of 400 mm or 500 mm (fitted with double series of outlets and inspection cap). ** Our fresh water tank thickness is calculated for standard use of tanks to be installed on leisure boats. The installer or the designer shall be responsible for checking that both the tanks and their mounting systems comply with the required use. Technical support shall be requested, if necessary. The option to require on demand tanks increased in thickness. Fresh water rigid tank, tapered version Made from linear food-grade polyethylene. They are flared on the side to perfectly adhere to the hull. They are tasteless and odourless. Supplied complete with inspection cover for cleaning and blind threaded holes for drainage and venting at 1/2" and 1"1/4 for loading. (For hose connection see various models in group 17 and 52). Code Capacity l Plan mm Height mm 52.195.50 46 430x550 290 52.195.75 70 430x800 290 52.195.10 100 450x1020 300 Rigid water tank In white polyethylene, triangular flared for the bow. Complete with 4 blind threaded holes from 1/2” - 1”1/4 where the hose connectors for loading, unloading, and venting are screwed (see various models in group 17). Code Capacity l Standard thickness mm +/- 5% 52.194.00 80 5* * Our fresh water tank thickness is calculated for standard use of tanks to be installed on leisure boats. The installer or the designer shall be responsible for checking that both the tanks and their mounting systems comply with the required use. Technical support shall be requested, if necessary. The option to require on demand tanks increased in thickness. White polypropylene tank, suitable for fresh water, holds 60 litres; designed for wall mounting Suitable for mounting behind cabinets or in cavities. Complete with female threads of 1/2" - 3/4" - 1" 1/2 for loading, unloading, venting + level indicator flange. Code Capacity l mm Max length for float cm Standard thickness mm +/- 5%* 52.145.78 60 450 x 350 depth x 670 total height 60 5 * Our fresh water tank thickness is calculated for standard use of tanks to be installed on leisure boats. The installer or the designer shall be responsible for checking that both the tanks and their mounting systems comply with the required use. Technical support shall be requested, if necessary. The option to require on demand tanks increased in thickness.
RkJQdWJsaXNoZXIy MjM2MTk=