222 Electrical materials 14 E14.270.32 E14.100.06 E14.270.47 E14.270.39 VICTRON Quattro combo system - Battery charger + Inverter Same functions of the Multiplus system, but it can be connected to 2 independent AC sources (eg. dock and generator or 2 generators) and the Quattro system will automatically connect to the active source. VICTRONCode Type AC inlet (2x) DC supply V Inverter Battery charger No of outlets mm Power V - A Outlet V - AC Charge voltage Battery charge current A 14.268.10 12/3000/120 187/265 9.5 - 17 3000 230 14.4 120±4 1+1* 362x258x218 19 14.268.11 24/3000/70 187/265 19 - 33 3000 230 28.8 70±4 1+1* 362x258x218 19 14.268.13 24/5000/120 187/265 19 - 33 5000 230 28.8 120±4 1+1* 444x328x240 30 14.268.14** 24/8000/200 187/265 19 - 33 8000 230 28.8 200±4 1+1* 470x350x280 41 * Second 4A outlet dedicated to the starting batteries. 14.270.32 Digital Multicontrol. Control panel for both inverter and battery charger. Possibility to manage the inlet current when switching from dock supply to generator supply. It can manage parallel and three-phase devices. It can be configured with several VE-BUS remote systems. Cable RJ45 needed. 14.100.06 Battery monitor. 14.270.47 7-m RJ45 cable for 14.270.39 14.270.39 VE-Bus --> USB interface for computer connection. ** Only available on order. E14.070.50 E14.070.51 VICTRON GX series control panel It provides control and monitoring (also in remote mode) of VICTRON devices. All readings on the screen can be forwarded to a remote computer via an external router (WebBoat4G PLUS, not included) for both monitoring and configuration. The GX series supports the following products: Inverter/Multi/Quattro/Skylla-i/Control panels/Battery monitors. VICTRONCode Model Version 14.070.50 Control GX With colour display 14.070.51 Control VENUS GX Without display VICTRON isolation transformer This device prevents all continuity between the onboard electric installation and the dock thus making the installation safer since it is isolated. It allows the automatic circuit breaker to activate correctly and avoids problems due to galvanic currents. VICTRON | VICTRON transformes| Isolation Code Type V Power W mm 14.264.01 2000 115/230 2000 375x214x110 10 14.264.02 3600 115/230 3600 362x258x218 23 14.264.03 7000 230 7000 362x258x218 26 14.264.04* 3600 115/230 3600 362x258x218 23 * Automatic selection of input voltage. VICTRON 120/240V 32/100A isolation autotransformer It is an electrical transformer with only one winding that has at least three taps where electrical connections are made. It drastically reduces ohmic losses and eliminates the need of electrical isolation between windings but, unlike dual-winding transformers, it doesn’t provide electrical isolation between the primary and secondary side of the transformer. It is often used to step up or step down voltages in the 110/120 volt range and voltages in the 220/240 volt range. For example providing 120V from 240V input, allowing equipment designed for 120 volts to be used with a 240 volt supply. VICTRON | VICTRON autotransformers | Code Input/output voltage Max input current (240V) mm 14.264.10 120/240 V; 50/60 Hz 32 A 375x214x110 10 14.264.11 120/240 V; 50/60 Hz 100 A 425x214x110 14
RkJQdWJsaXNoZXIy MjM2MTk=