219 Electrical materials 14 VICTRON Phoenix Smart battery charger IP43 - Bluetooth-enabled device that can be used to monitor, change settings, and to update the charger. - The 1+1 output configuration provides 3 Amps to the second outlet, ideal for maintaining a starter battery. - The 3-output configuration can provide full power to each outlet. - Voltage automatic compensation to balance voltage drops in DC cables. - Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storage. - Calibrated charge depending on whether the vessel is connected to the dock AC supply. - BatterySafe protects your battery from gassing. - Storage mode to prevent gassing and corrosion of the plates whenever the battery has been idle for 24 hours. - Universal power 90/265 VAC 90/400 VDC-45/60 Hz. - Protection against overvoltage, short circuit, overtemperature. - Also suitable for Li-ion batteries. - Intelligent charge algorithm (via Bluetooth). - Remote on/off. - VE.Direct port. VICTRON | Phoenix Smart | Bluetooth battery Code Type Output V Max charge current A No. of outputs mm 14.266.11 12/30 14.4 30 3 180x249x100 3.5 14.266.13 12/50 14.4 50 3 180x249x100 3.5 14.266.16 24/16 28.8 16 1+1 180x249x100 3.5 14.266.17 24/16 28.8 16 3 180x249x100 3.5 14.266.18 24/25 28.8 25 1+1 180x249x100 3.5 14.266.19 24/25 28.8 25 3 180x249x100 3.5 14.207.30 2m-CE-electric cable E14.270.30 E14.270.36 E14.100.06 VICTRON Centaur analogic battery chargers 3-stage IUOU charge automatic chargers, independent outlets to charge 3 banks at the same time - full power battery. Technical data: - Aluminium frame - Universal supply: 90/265VAC - 90/400 VDC - 45/65 Hz - Analogic ammeter - Internal temperature sensors, forced ventilation - Protections against short circuit, overheating - Acid-GEL-AGM battery selection. VICTRON | Centaur analogic battery chargers Code Type Outlet V Max charge A No of outlets Recommended for batteries A·h mm 14.274.02 12/30 14.3 30 3 120/300 355x215x110 3.8 14.274.03 12/40 14.3 40 3 160/400 426x239x135 5 14.274.05 12/60 14.3 60 3 240/600 426x239x135 5 14.274.06 12/80 14.3 80 3 320/800 505x255x130 12 14.274.07 12/100 14.3 100 3 400/1000 505x255x130 12 14.274.09 24/30 28.8 30 3 120/280 426x239x135 5 14.274.10 24/40 28.5 40 3 160/400 505x255x130 12 14.274.11 24/60 28.5 60 3 240/600 505x255x130 12 14.270.30 Battery alarm panel, a sound or visual alarm warns about too high or too low voltage 14.100.06 BMV-700 Battery monitor E14.270.36 E14.270.30 E14.100.06 E14.270.47 VICTRON Phoenix microprocessor battery charger The ’adaptive’ control with microprocessor perfectly adapts the charge to the battery requirements (very important function in case of sealed batteries). 4-stage charge: bulk-absorption-float storage. The storage function automatically reduces to 13.2V/26.4V the FLOAT function thus minimizing gasification and corrosion of the positive plates. Technical data: Aluminium frame; Universal supply: 90/265VAC - 90/400 VDC - 45/65 Hz; Control LED lights; Internal temperature sensors; Cable voltage drop compensation; Protections against short circuit, polarity inversion, overvoltage, overheating, high voltage of the battery. VICTRON | Phoenix | Microprocessor battery Code Type Outlet V Max charge A Outlets Recommended for batteries A·h mm 14.266.01 12/30 14.4 30 + 4 2 + 1* 100/400 350x200x108 3.8 14.266.02 12/50 14.4 50 + 4 2 + 1* 200/800 350x200x108 3.8 * 2 full outlets + 4 A limited outlet dedicated to starting batteries 14.270.30 Battery alarm panel, a sound or visual alarm warns about too high or too low voltage 14.270.36 PHOENIX control panel. It monitors the charge level and ensures the reduction of outlet DC current if the inlet AC power is low. It also enables to modify the battery charge parameters. RJ45 cable required. 14.270.47 RJ45 7-m cable. 14.100.06 BMV-700 Battery monitor
RkJQdWJsaXNoZXIy MjM2MTk=