Catalogo Marlow

CRUISER & RACER SERIES MARLOWBRAID 3 STRAND POLYESTER CORE | 16 PLAIT POLYESTER COVER Our famous polyester line offers class leading low stretch for a polyester rope thanks to its laid 3-strand core construction, making Marlowbraid an ideal halyard rope. The tough 16-plait cover is hard wearing and grips well in clutches also offering great abrasion resistance on winches when used as a sheet. The low stretch core and tough cover makes Marlowbraid ideal for all control line applications such as cascades and vangs. APPLICATION : SHEETS CONTROL LINE PURCHASE HALYARDS DIAMETER: 6-20mm DIAMETER (mm) 6 8 10 12 14 16 18 20 BREAK LOAD (kg) 986 1580 2850 4450 5460 7420 10200 11300 WEIGHT (kg/100m) 2.68 4.45 7.30 10.0 14.5 19.0 23.5 28.5 MATTBRAID DIAMETER: 6-16mm DIAMETER (mm) 8 10 12 14 16 BREAK LOAD (kg) 1120 1980 2810 3300 5430 WEIGHT (KG/100m) 5.00 7.00 9.90 12.6 17.8 Soft, flexible and easy on the hands, Mattbraid uses the same braid- on-braid construction as Doublebraid, but with the addition of a soft, spun polyester cover. Great feel and grip in the hands, especially when wet, Mattbraid is the ideal sheet for cruising applications where comfort is key. 12 STRAND POLYESTER CORE | 24 PLAIT POLYESTER COVER APPLICATION : SHEETS CONTROL LINE TAILS PS12 12 STRAND PRE-STRETCHED POLYESTER 12 strand polyester can easily be spliced for halyard tails and lazy jacks. DIAMETER: 4-6mm DIAMETER (mm) 4 5 6 BREAK LOAD (kg) 678 1060 1330 WEIGHT (kg/100m) 1.19 1.91 2.47 APPLICATION : ACCESSORIES M-RIG MAX CASE STUDY YACHT: J-BOATS J97 – 30’ CRUISER RACER STANDARD RIGGING. Total standing rigging weight:18.09 kg (excluding terminations) Discussions with the rigger suggest than approximately 50% additional elongation within the rig is acceptable and manageable. Windage is not an issue, therefore M-Rig Max is specified as follows: Total standing rigging weight:5.47 kg (excluding terminations) Our case study shows that by using M-Rig Max the total standing rigging is 70% lighter, saving 12.62 kg aloft, but is nearly 3 times as strong as the equivalent wire/rod rig. If the rigger is able to manage the initial elastic elongation when installing M-Rig Max and the mast can manage the increased deflection during gusts, smaller diameters can be specified, further reducing both weight and windage. In our example above, a further 1.8 kg can be reduced from the rig by specifying M-Rig Max 2mm smaller. A saving of 14.41 kg in the rig is equivalent to shaving 100kg off the bulb – and the rigging is stronger than with wire. SECTION MATERIAL mm/ mm/100kg MBL (kg) MASS g/m LENGTH (m) QTY FORESTAY -10 Rod 0.00200 4,670 249 12.99 1 TOP SHROUDS 7mm Compact Strand 0.00190 4,910 260 12.56 2 LOWERS 7mm Compact Strand 0.00190 4,910 260 4.82 2 INTERMEDIATE 6mm Compact Strand 0.00259 3,550 194 9.03 2 BACKSTAY 5mm 1x19 Stainless 0.00463 2,000 122 11.00 1 BACKSTAY V 5mm 1x19 Stainless 0.00463 2,000 122 3.72 2 TIE ROD 5mm 1x19 Stainless 0.00463 2,000 122 0.53 1 SECTION MATERIAL mm/ mm/100kg MBL (kg) MASS g/m LENGTH (m) QTY FORESTAY 11mm M-Rig Max 0.00313 12,618 75.5 12.99 1 TOP SHROUDS 11mm M-Rig Max 0.00313 12,618 75.5 12.56 2 LOWERS 11mm M-Rig Max 0.00313 12,618 75.5 4.82 2 INTERMEDIATE 10mm M-Rig Max 0.00376 10,518 63 9.03 2 BACKSTAY 7mm M-Rig Max 0.00630 6,272 35.6 11.00 1 BACKSTAY V 7mm M-Rig Max 0.00630 6,272 35.6 3.72 2 TIE ROD 7mm M-Rig Max 0.00630 6,272 35.6 0.53 1 MGP FURLER 50 Snake skin pattern allows easy end-to-end splicing with no diameter increase. Vectran ® or Technora ® cover ensures heat and abrasion resistance. Has a sacrificial Polypropylene core as standard, but can be up graded to a D12 core for higher load furling systems. POLYPROPYLENE CORE – 16 PLAIT VECTRAN ® / POLYESTER SNAKE SKIN COVER. DIAMETER: 6-12mm PRODRIVE 2.0 - TORSIONAL FURLING CABLE • FAST FURLING • EASIER FURLING • EVEN FURLING • TOP DOWN FURLING • FASTER SAIL CHANGES • ECONOMIC OPTION FOR MULTIPLE HEAD SAILS • INTEGRATES EFFORTLESSLY WITH ANY FURLING UNIT PRODRIVE OFFERS PARA-ARAMID CORE | PARA-ARAMID TORSION JACKET | POLYESTER COVER DIAMETER (mm) 7 9 11 13 15 BREAK LOAD (kg) 2190 3440 5070 6870 7450 WEIGHT (kg) 4.47 6.67 9.84 13.6 18.1 Following the success of Marlow’s original torsional cable, the PRODRIVE 2.0 has been through an engineered evolution which sees a number of improvements to the core and cover resulting in a better performing rope product with improved rigidity and stiffness without increasing the cost. Upgrades to the core include the high modulus aramid from the centre of the rope being replaced with a braided core firm filler which gives the centre of the rope more rigidity and durability. A benefit of the braided core is that this no longer ‘knuckles’ when bent and is then covered with a secondary load bearing aramid core. Secondary braided Black Dyneema® outer jacket Primary braided aramid jacket Load bearing aramid core to encase firm filler Braided core firm filler The PRODRIVE 2.0 has two additional braided jackets; the first continues to be made from aramid fibre to carry torsional load, and now the second braided jacket has been upgraded from polyester to black Dyneema® – a new addition to the DSM Dyneema® product range which wasn’t available at the time of engineering PRODRIVE 1.0. 31