98/99 SS180007 (Available in the USA only) 3mm diameter wire, PVC coated PART NO. DESCRIPTION 69000499 12.5mm Studlink vertical DCRS (V8) 69000412 14mm Shortlink vertical DCRS (V8) 69000507 14mm Studlink Vertical DCRS (V8) 69000508 14mm Studlink Vertical DCRS (V9) 69000500 16mm Studlink Vertical DCRS (V8) PART NO. DESCRIPTION 69000506 16mm Studlink Vertical DCRS (V9) 69000515 16mm Studlink Horizontal DCRS (V9 / V10 / V12) 69000504 17,5mm Studlink Horizontal DCRS (V9 / V10 / V12) 69000510 19mm Studlink Horizontal DCRS (V10 / V12) 69000509 22mm Horizontal DCRS (V12) PART NUMBER (Non PVC coated) DESCRIPTION SAFE WORKING LOAD kg lb 66840027 Anchor Safety Strap 3mm Wire 70 154 66840028 Anchor Safety Strap 4mm Wire 140 309 2. Anchoring Anchor Safety Straps • Lewmar recommends securing the anchor to the boat when not in use • Prevents the anchor from deploying unintentionally • Simply clipped on the chain, shackle, or anchor • The windlass is not designed to hold the anchor to the boat when not in use The Devil's Claw Chain Stopper units are designed to be used with Lewmar V8 to V12 windlass range. • Paddles hold the load of the anchor and chain when at anchor, taking the load off the windlass • Devil's Claw is used for tensioning the anchor chain when the anchor is stowed, preventing it from moving when under way. • Required by classification societies at 80%, Lewmar exceed the breaking load of these units which is calculated at 125% of the breaking load of the chain. • Stopper paddles made from high tensile 17-4PH Stainless Steel, and the main bodies are made from 316 Stainless Steel, combined with an integral high tensile 17-4PH Stainless Steel stopper block. • Available in horizontal & vertical configurations and a wide range of chain size from 12.5 to 22mm. • Vertical units have the Devil's Claw operating vertically, while horizontal units have the Devil's Claw operating horizontally. • The height of chain operation is designated by windlass size. For example, it is possible to use a V8 size unit with a V9 windlass if the Devil's Claw is mounted on a plinth to raise it to the correct height. • Custom options available. Contact custom@lewmar.com for more information. Min Length 305mm (12") Stainless Steel Devil's Claw Horizontal Devil's Claw Vertical Devil's Claw Chain Stoppers
RkJQdWJsaXNoZXIy MjM2MTk=