TAKING YOU FURTHER Navico Group is the world’s leading supplier of integrated systems and products to industries ranging from marine to recreational vehicle and beyond. We offer an unmatched portfolio comprised of industry-leading brands in power management, digital control & monitoring, networked devices and marine electronics. Lithium Batteries Portable Power AGM Batteries relionbattery.com Chartplotters Radar Autopilots Sonar Technology simrad-yachting.com Digital Control & Monitoring Onboard / Offboard UX czone.navico.com Battery Management Power Distribution bepmarine.com Chartplotters Displays Instruments Sensors bandg.com Battery Chargers promariner.com Wire Wire Management ancorproducts.com Trolling Motors motorguide.com Water & Heating Systems Pumps whale.navico.com Marine Cartography c-map.com Chartplotters Fishfinders Sonar & Radar Trolling Motors lowrance.com Batteries & Battery Management Power Conversion Transformers Alternators & Regulators Digital Control & Monitoring mastervolt.com Water, Fuel & Lighting Systems Marine Accessories Seating & Pedestals & Ladders attwoodmarine.com Battery Management Circuit Protection Power Distribution bluesea.com ® AC Shore Power Marine Accessories marinco.com Integrated Lithium-Ion Management System fathomepower.com Actuators Trim Tab Systems lencomarine.navico.com See how far our innovations can take you at Navico.com AVICO GROUP
PROVEN With more than 30 years’ expertise in developing market leading products, Lenco™ is an established leader in the Marine industry. INNOVATIVE The industry’s foremost engineers are developing trim and surf systems that push the boundaries of what’s achievable on the water. CONNECTED As part of Navico Group™, Lenco are uniquely positioned to deliver unprecedented levels of integration and connectivity. Why Lenco? Because we’re proven leaders in boat stability. Innovating for the smoothest, safest, most enjoyable on-the-water experiences.
Welcome to the World of Trim Trim tabs provide lift to compensate for changes in speed, weight and sea state. Trusted Safety With more predictable movement through the water, you’re better able to navigate the waves safely. Ultimate Control Added stability means you’re in greater control of your vessel. Ultimately, this makes you a better skipper, providing you the ability to make confident adjustments to your boat’s behavior. Total Comfort A smooth ride is ultimately more enjoyable for those on-board. By getting you on the plane faster, trim tabs help limit the impact of waves at all speeds. Proven Durability For three decades, Lenco has led the way in designing products that are built to last. From robust actuators to trim tabs with added electro-polished protection, Lenco products can be relied on time and time again, so you can relax and enjoy your time on the water.
LENCO PRO CONTROL™ TABLE OF CONTENTS 100 SERIES CONTROLS & SWITCHES Standard Integrated Switch Kit 42 LED Integrated Switch Kit 42 LED Indicator (TWO-PIECE) Switch Kit 43 Double Rocker Switch Kit 43 Airboat Single Rocker Switch 44 Flybridge Standard Integrated Indicator Kits 44 Flybridge LED Integrated Indicator Kits 45 Flybridge LED (Two-Piece) Indicator Kits 45 Dimensional Drawings for 100 Series Switches 46 100 SERIES REPLACEMENT PARTS & ACCESSORIES Replacement Blades 54 Mounting Brackets and Hardware 55 Parts & Accessories 56 Pro Control Auto 8 NEW! Pro Control Auto System Kits 10 NEW! Pro Control Auto Keypad Kits 11 Pro Control Assist 12 NEW! Pro Control Assist System Kits 14 NEW! Pro Control Assist Keypad Kits 15 Dimensional Drawings for Pro Control 16 Pro Control (SD Pro) Actuators 17 Pro Control Accessories 18 SURF Lenco Surf 20 NEW! SD Pro Actuators for Surf Applications 19 100 SERIES ELECTRIC TRIM TAB KITS 24 Lenco Trim Tab Kits 26 Trim Tab Selection Guide 27 Standard Mount Trim Tab Kits 28 Edge Mount Trim Tab Kits 29 Standard & Edge Mount Trim Tab Kits (switch included) 30 Standard Performance Trim Tab Kits 31 Heavy Duty (HD) Performance Trim Tab Kits 32 Extreme Duty (XD) Performance Trim Tab Kits 33 High Performance (HP) Trim Tab Kits 34 Super Strong Trim Tab Kits 35 LS-Limited Space Trim Tab Kits 36 Airboat Trim Tab Kit 37 Hybrid Trim Tab Kits 37 Bennett® Hydraulic-to-Lenco Electric Conversion Kit 38 Dimensional Drawings for Trim Tab Kits 100 SERIES ACTUATORS & HATCH LIFTS 50 Trim Tab Actuator Guide 50 Replacement HD Heavy-Duty Actuator 51 100 Series Actuators 52 Electric Hatch Lifts INDEX 57 Index
NEW FROM LENCO – PRO CONTROL Nothing Comes Close. Pro Control Auto delivers best-in-class auto-levelling for unprecedented precision, control, and comfort on the water.
LENCO PRO CONTROL™ NEW! Pro Control Overview 8 NEW! Pro Control System 10 NEW! Pro Control Keypad Controller Kits 11 NEW! Pro Control Keypad Flybridge Kits 12 Pro Control Replacement Actuators 13 Pro Control Accessories 14 SD Pro Overview 16 SD Pro Actuators 17
lencomarine.navico.com 8 LENCO PRO CONTROL™ Reduced Pitch 5 Year Warranty 74% Better Auto-Leveling* 24% Less Impact* PRO CONTROL AUTO Nothing Comes Close. Pro Control will change the way you think about auto levelling, providing unprecedented levels of precision, control, and comfort on the water. Keep a Level Head 74% better auto-levelling Pro Control is a game-changer for auto-levelling and boat stability, boasting a best-in-class 74% improvement*. Pro Control automatically counteracts an array of dynamic running conditions including weight shifts, keeping you and your passengers on an even keel. Slam No More 24% less impact Wave goodbye to the dreaded “thuds” and “slams” caused by impact, and move through water with unparalleled ease. Averaging an industry-best 24% reduction of re-entry impact*, Pro Control makes for a smoother, more comfortable/cushioned ride. Confidence Offshore Tame rough seas Have the confidence to cross the inlet and head out to deeper waters. Pro Control rivals far more expensive products when running offshore, delivering an impressive 15% pitch reduction◊ in dynamic seas. React Faster Control in an instant Fast response times provide enhanced control to the helm, making near-instant adjustments in response to dynamic sea conditions. In addition, improved holeshot gets boaters on plane faster, providing superior comfort and visibility sooner, with a rapid transition into auto-levelling. Built To Last 5-year warranty Just because we’re more affordable doesn’t mean you have to compromise on build quality. Best-in-class 5-year warranty gives peace of mind to both boatbuilders and end users. Simple maintenance extends lifespan. Enhanced Control with Mercury® SmartCraft® Beyond standard (non-Mercury) engine integration, Pro Control connects with Mercury® SmartCraft® devices to enhance your experience by transforming your acceleration, offering superior levelling and control as you launch and slow down to idle. *vs baseline testing ◊vs competitors (competitive boat automatic stabilization systems) Quicker Holeshot I BEX 2024
LENCO PRO CONTROL™ 9 lencomarine.navico.com Pro Control Auto System Diagram SD Pro Actuators and Trim Tabs Pro Control Auto Keypad IMU (Inertial Measurement Unit) Lenco 2k CAN Protocol Full Pro Control Auto Kit Options See page 10.
LENCO PRO CONTROL™ 10 lencomarine.navico.com IDEAL FOR BOATS: 16' to 30' (4.9 m to 9.1 m) Standard L" X W" Boat Length Hinge Height Min Transom Height Keypad Retail Box Part # 9" x 12" 16'–25' 2" (5.1 cm) 14" (35.6 cm) Auto – 15182-107 12" x 12" 17'–30' 2" (5.1 cm) 14" (35.6 cm) Auto – 15184-107 Edge Mount L" X W" Boat Length Hinge Height Min Transom Height Keypad Retail Box Part # 12" x 12" 17'–30' 2" (5.1 cm) 11" (27.9 cm) Auto – 15186-107 Standard 15182-107 Edge Mount 15186-107 Kits include: • (1) Pro Control Auto Keypad (15174-107) • (1) Pro Control Auto IMU (15180-001) • (2) 12-gauge 304 (2.7 mm) stainless steel standard finish blades: - Standard blades - with a 5/8" (1.6 cm) flared trailing edge. - Edge Mount blades - with 1" (2.5 cm) turned up edges and a 5 degree taper on both sides to the trailing edge) & 1/8" (3.2 mm) diameter hinge pin. • (2) 2.25" Stroke SD Pro Actuators, 11.5" pin to pin (15189-001) • (6) Micro C Tee Connector (15209-101) • Micro C Power Cable with fuse and ground (15197-101) • (2) 6' Micro C Drop cables (15199-101), (1) 15' (15200-101) and (1) 25' (15201-101) Micro C Drop cables • (2) 6 Pin Detusch to Micro C Actuator Network Adapter Cable (15205-101) • (2) 3' (.91 m) Pro Control Actuator Power Pigtail (15206-101) • (2) Wake Signal Adapter for Non-Mercury Systems (15207-101) • (2) Corrosion proof Upper Mounting Brackets with gland seal (15193-101) • (2) Corrosion proof Lower Mounting Brackets (15194-101) • Lenco 2K Backbone Kit Pro Control Accessories See pages 18-19. Dimensional Drawings See page 16. NEW! Pro Control Auto System Kits 12V System Pro Control Auto delivers industry-leading auto-levelling for unprecedented precision, control, and comfort on the water. Standard Mount Trim Tabs—The original Trim Tab design, ideal for center console fishing boats to cuddy cabin cruisers. Edge Mount Trim Tabs—Designed for boat applications where a lower actuator mounting height is desirable. Actuator mounts at the trailing edge of the blade giving it a 3" (7.6 cm) lower mounting height on 12" (30.5 cm) long blades. All edges are turned up for added strength and style. WARRANTY YEAR 2 YEAR WARRANTY 5 YEAR WARRANTY 10 YEAR WARRANTY WARRANTY WARRANTY YEAR YEAR WARRANTY YEAR WARRANTY YEAR I BEX 2024
LENCO PRO CONTROL™ 11 lencomarine.navico.com WARRANTY YEAR 2 YEAR WARRANTY 5 YEAR WARRANTY WARRANTY WARRANTY YEAR YEAR WARRANTY YEAR WA Y NEW! Pro Control Auto Keypad Kits Pro Control Auto Keypad with auto-levelling capabilities provides intuitive, precision controls for your trim tab system. CAN communication protocol comes as standard, making integration and installation simple. Flybridge Control 15176-107 Helm Control/IMU 15172-107 Helm Control/IMU Description Retail Box Part # Auto Controller Kit – 15172-107 Auto Replacement Keypad – 15174-107 Flybridge Control Description Retail Box Part # Auto Flybridge Keypad Kit – 15176-107 Auto Replacement Flybridge Keypad – 15178-107 Helm Control/IMU Kit Includes: • (1) Pro Control Auto Keypad (15174-107) • (1) Pro Control Auto IMU (15180-001) • (3) Micro C Drop Cables: (2) 6' (1.82 m) (15199-101), (1) 15' (4.57 m) (15200-101) • (1) Wake Signal Adapter for Non-Mercury systems (15207-101) • (3) Micro C Tee Connectors (15209-101) Pro Control Accessories See pages 18-19. Dimensional Drawings See page 16. Dimming Control - Day and Night Mode Dimming control lets you control the lighting across all Mercury® DTS equipment and select displays with a single button press. Flybridge Control Kit Includes: • (1) Pro Control Auto Keypad (15174-107) • (1) Micro C Drop Cable: 6' (1.82 m) (15199-101) • (1) Micro C Tee Connector (15209-101) Please Note: Pro Control Keypads are compatible with SD Pro Actuators only.
LENCO PRO CONTROL™ 12 lencomarine.navico.com • CAN communication protocol as standard • Hole Shot Assist • Class leading user interface with Intuitive keypad design • Day/Night Mode for global dim on selected MFDs • Programmable Memory Position Recall • Built to Last – Easy Maintenance Holeshot Assist Programmable Memory Position Recall NMEA 2000® Integration Intuitive, Precise Controls PRO CONTROL ASSIST The control is in your hands. Pro Control Assist offers a manual control option, featuring a smart, sleek dial controller, designed to provide a class-leading user interface. Get all the benefits of Pro Control including holeshot assist, with CAN communication protocol and the ability to store preferred positions for your trim tabs. 5 Year Warranty
LENCO PRO CONTROL™ 13 lencomarine.navico.com Pro Control Assist System Diagram Full Pro Control Assit Options See page 14. SD Pro Actuators and Trim Tabs Pro Control Assist Keypad Lenco 2k CAN Protocol
LENCO PRO CONTROL™ 14 lencomarine.navico.com NEW! Pro Control Assist System Kits 12V System Pro Control Assist is the manual control option which features a smart, sleek dial controller, providing a best-in-class user interface. Standard Mount Trim Tabs—The original Trim Tab design, ideal for center console fishing boats to cuddy cabin cruisers. Edge Mount Trim Tabs—Designed for boat applications where a lower actuator mounting height is desirable. Actuator mounts at the trailing edge of the blade giving it a 3" (7.6 cm) lower mounting height on 12" (30.5 cm) long blades. All edges are turned up for added strength and style. IDEAL FOR BOATS: 16' to 30' (4.9 m to 9.1 m) Standard L" X W" Boat Length Hinge Height Min Transom Height Keypad Retail Box Part # 9" x 12" 14'–18' 2" (5.1 cm) 14" (35.6 cm) Assist – 15181-106 12" x 12" 22'–30' 2" (5.1 cm) 14" (35.6 cm) Assist – 15183-106 Edge Mount L" X W" Boat Length Hinge Height Min Transom Height Keypad Retail Box Part # 12" x 12" 16'–25' 2" (5.1 cm) 11" (27.9 cm) Assist – 15185-106 Standard 15181-106 Edge Mount 15185-106 Pro Control Accessories See pages 18-19. Dimensional Drawings See page 16. Kits include: • (1) Pro Control Assist Keypad (15175-106) • (2) 12-gauge 304 (2.7 mm) stainless steel standard finish blades: - Standard blades - with a 5/8" (1.6 cm) flared trailing edge. - Edge Mount blades - with 1" (2.5 cm) turned up edges and a 5 degree taper on both sides to the trailing edge) & 1/8" (3.2 mm) diameter hinge pin. • (2) 2.25" Stroke SD Pro Actuators, 11.5" pin to pin (15189-001) • (5) Micro C Tee Connector (15209-101) • Micro C Power Cable with fuse and ground (15197-101) • (2) 6' Micro C Drop cables (15199-101), (1) 25' (15201-101) Micro C Drop cables • (2) 6 Pin Detusch to Micro C Actuator Network Adapter Cable (15205-101) • (2) 3' (.91 m) Pro Control Actuator Power Pigtail (15206-101) • (2) Wake Signal Adapter for Non-Mercury Systems (15207-101) • (2) Corrosion proof Upper Mounting Brackets with gland seal (15193-101) • (2) Corrosion proof Lower Mounting Brackets (15194-101) • Lenco 2K Backbone Kit WARRANTY YEAR 2 YEAR WARRANTY 5 YEAR WARRANTY WARRANTY WARRANTY YEAR YEAR WARRANTY YEAR WARRANTY YEAR
LENCO PRO CONTROL™ 15 lencomarine.navico.com NEW! Pro Control Assist Keypad Kits Pro Control Assist Keypad with programmable memory position recall capabilities provides intuitive, precision controls for your trim tab system. CAN communication protocol comes as standard, making integration and installation simple. Flybridge Control 15177-107 Helm Control 15175-106 Helm Control Description Retail Box Part # Assist Controller Kit – 15173-106 Assist Replacement Keypad – 15175-106 Flybridge Control Description Retail Box Part # Assist Flybridge Keypad Kit – 15177-106 Assist Replacement Flybridge Keypad – 15179-106 Helm Control Kit Includes: • (1) Pro Control Assist Keypad (15175-106) • (2) Micro C Drop Cables, 6' (1.82 m) (15199-101) • (1) Wake Signal Adapter for Non-Mercury Systems (15207-101) • (2) Micro C Tee Connector (15209-101) Pro Control Accessories See pages 18-19. Dimensional Drawings See page 16. Dimming Control - Day and Night Mode Dimming control lets you control the lighting across all Mercury® DTS equipment and select displays with a single button press. 2 programmable memory position recall options Flybridge Control Kit Includes: • (1) Pro Control Assist Keypad (15175-107) • (1) Micro C Drop Cable: 6' (1.82 m) (15199-101) • (1) Micro C Tee Connector (15209-101) Please Note: Pro Control Keypads are compatible with SD Pro Actuators only. WARRANTY YEAR 2 YEAR WARRANTY 5 YEAR WARRANTY WARRANTY WARRANTY YEAR YEAR WARRANTY YEAR WA Y
LENCO PRO CONTROL™ 16 lencomarine.navico.com Dimensional Drawings for Pro Control Standard Mount Trim Tab Kits Pro Control Keypads Edge Mount Trim Tab Kits 2" (5.08 cm) 9"–12" (22.86–30.48 cm) 9"–12" (22.86–30.48 cm) 14" (35.56 cm) 12" (30.48 cm) 12" (30.48 cm) 11" (27.94 cm) 2" (5.08 cm) Note: Heights are approximate due to variablity of transom angle. Hole size should be 2-1/16" (53 mm). *including wire allowance Auto Assist 2.76" (70 mm) 2.76" (70 mm) 4.43" (110 mm)* 4.43" (110 mm)* 4.37" (111 mm) 4.37" (111 mm) 1.97" (50 mm) 1.97" (50 mm)
LENCO PRO CONTROL™ 17 lencomarine.navico.com Pro Control (SD Pro) Actuators A core element of the Lenco Pro Control™ system is the SD Pro Actuator - engineered to offer best in-class connectivity, precise control and an unbeatable user experience. For further information on SD Pro Actuators See page 21. 10" Pin to Pin Actuator • 2.25" Stroke 15187-001 10.5" Pin to Pin Actuator • 2.25" Stroke 15188-001 11.5" Pin to Pin Actuator • 2.25" Stroke 15189-001 12" Pin to Pin Actuator • 4.25" Stroke 15190-001 SD Pro Actuator Replacement Guide Before contacting Lenco Customer Service, please have the Parent Actuator number, Date Manufactured and Operator Code on hand. Lenco Customer Service can be reached at info.lencomarine@navicogroup.com. Location of the imprinted actuator branding code Date Manufactured Operator Code Parent Actuator Please Note: SD Pro Actuators are compatible with Pro Control Keypads only. WARRANTY YEAR WARRANTY WARRANTY YEAR YEAR WARRANTY YEAR WA Y
LENCO PRO CONTROL™ 18 lencomarine.navico.com Pro Control Accessories Pro Control Auto Replacement IMU 15180-001 Remote Gland Seal Kit 15191-101 6 Pin Detusch to Micro C Actuator Network Adapter Cable 15205-101 Wake Signal Adapter for Non-Mercury Systems 15207-101 Micro C Drop Cable 15198-101 2' (0.61 m) 15199-101 6' (1.83 m) 15200-101 15' (4.57 m) 15201-101 25' (7.62 m) Micro C Tee Connector 15209-101 Micro C Terminating Resistor Kit (M/F) 15196-101 Micro C Power Cable with Fuse and Ground 15197-101 Mercury® SmartCraft® Interface Cable 15202-101 36" (0.91 m) 15203-101 60" (1.52 m) 15204-101 120" (3.05 m) Actuator Hardware Kit 15195-101 General Spares Micro C Spares Connector Spares Pro Control Power Pigtail, 36" (0.91 m) 15206-101 WARRANTY YEAR WARRANTY WARRANTY YEAR YEAR WARRANTY YEAR WARRANTY YEAR
LENCO PRO CONTROL™ 19 lencomarine.navico.com Pro Control Accessories Lower Mounting Bracket 15194-101 Upper and Lower Mounting Bracket Kit with Hardware 15192-101 Deutsch Connector Kit for Pro Control Actuator Pair 15208-101 Upper Mounting Bracket 15193-101 Connector Spares Bracket Spares WARRANTY YEAR WARRANTY WARRANTY YEAR YEAR WARRANTY YEAR WA Y
20 SURF LENCO SURF Create precise, repeatable wake with Lenco. Precision-engineered Surfing The key to better wake surfing? Practice and repetition. That’s why the SD Pro is precision engineered to deliver a repeatable wake time after time. Simply dial in your number and get surfing – cutting set-up time to a minimum. And improved response times mean you can tweak things in an instant. Simple installation The Lenco team has designed the SD Pro actuator to be easier than ever to install in your wake boats, using CAN communication protocol with no power distribution module (PDM) required. And once it’s installed, it’s there to be relied upon, season after season, with a 5-year warranty as standard. Best-in-class connectivity We know the importance of intelligent, interconnected systems. That’s why the SD Pro is built on new CAN-based hardware, to make integration seamless and simple. Make It Yours The only actuator to enable full white label production, the SD Pro allows you to put your own stamp on things. By implementing your own logos and colouring, the SD Pro helps build your brand and deliver a more seamless user experience. Ultimately it also helps you deliver a better performing, better looking boat to your customers.
SURF 21 lencomarine.navico.com NEW! SD Pro Actuators for Surf Applications Build the ultimate watersports machine with the new SD Pro actuator. The cutting-edge actuator empowers boaters to create precise, repeatable wake. Best-in-class connectivity and total customization deliver an unbeatable user experience in your own image. • Fast, precise, repeatable wake enabled through inductive sensors – within 1% accuracy • Seamless integration into surf systems, with CAN-based hardware enabling smart actuation • MFD integration available • Simple installation and intuitive commissioning • Expanded Mercury® integration, connecting directly with SmartCraft®, providing improved and superior control logic • Fault and diagnostic capability with overload protection Description Stroke Volts Mounting Hardware Cable Part # 10" Pin to Pin 2.25" Stroke (5.72 cm) 12V 3/8" 6' 15187-001 10.5 Pin to Pin 2.25" Stroke (5.72 cm) 12V 3/8" 6' 15188-001 11.5" Pin to Pin 2.25" Stroke (5.72 cm) 12V 3/8" 6' 15189-001 12" Pin to Pin 4.25" Stroke (10.80 cm) 12V 3/8" 6' 15190-001 2.6" (6.6 cm) 11.5" (29.2 cm) .375" (.95cm) 2.6" (6.6 cm) 12" (30.5 cm) .375" (.95cm) 2.6" (6.6 cm) 10.5" (26.7 cm) .375" (.95cm) 2.6" (6.6 cm) 10" (25.4 cm) .375" (.95cm) 10" Pin to Pin Actuator • 2.25" Stroke 15187-001 10.5" Pin to Pin Actuator • 2.25" Stroke 15188-001 11.5" Pin to Pin Actuator • 2.25" Stroke 15189-001 12" Pin to Pin Actuator • 4.25" Stroke 15190-001 WARRANTY YEAR WARRANTY WARRANTY YEAR YEAR WARRANTY YEAR WA Y
100 SERIES TRIM TABS Backed by 30 years of reliable and robust actuation, Lenco's 100 Series Trim Tabs Systems make your boat ride smoother, drier, faster and safer.
100 SERIES ELECTRIC TRIM TABS KITS Customization 18 Trim Tab Selection Guide 19 Standard Mount Trim Tab Kits 20 Edge Mount Trim Tab Kits 21 Standard & Edge Mount Trim Tab Kits 22 Standard Performance Trim Tab Kits 23 Heavy Duty (HD) Performance Trim Tab Kits 24 Extreme Duty (XD) Performance Trim Tab Kits 25 High Performance (HP) Trim Tab Kits 26 Super Strong Trim Tab Kits 27 LS-Limited Space Trim Tab Kits 28 Airboat Trim Tab Kit 29 Hybrid Trim Tab Kits 30 Bennett® Hydraulic-to-Lenco Electric Conversion Kit 30
lencomarine.navico.com 24 A wide range of our trim tabs are available in an electro-polished finish. This is a process that improves the surface finance of the blades and provides greater protection from the elements. What is Electro-Polishing? Electro-Polishing is a process that improves the surface finish of our 304 stainless steel trim tab blades. Electro-Polishing delivers a smoother, more reflective surface than our standard mill finish and improves surface cleanability. Electro-Polishing dissolves free iron, inclusions, and embedded particles from the surface of our trim tabs. Lenco’s in-house process improves the nearsurface chemistry of the material, and promotes the formation of an improved corrosion resistant surface layer. Benefits: • Removes iron and potential contaminants from the surface of our trim tabs. • Removes a small amount of material from the surface of our trim tab blades, also removing small burrs. • Enhances the chromium and nickel content providing added resistance against environmental factors such as air, fresh and salt water. • Polishes areas inaccessible by any other polishing methods. • Provides a clean and smooth surface that is aesthetically pleasing. ELECTRIC TRIM TAB KITS Electro-Polished LENCO TRIM TAB KITS Everything you need for stability in one box.
100 SERIES ELECTRIC TRIM TAB KITS 25 lencomarine.navico.com 100 Series System Diagram 100 Series Actuators and Trim Tabs 100 Series Switches Full 100 Series Kit Options See page 27-37.
100 SERIES ELECTRIC TRIM TAB KITS 26 lencomarine.navico.com Standard Mount Edge Mount Runabout, Cabin Cruiser & Saltwater Fish 9"x9" 45 knots 9"x12" 45 knots 9x18 45 knots 9"x24" <35 knots 9"x30" <35 knots 9"x36" <35 knots 12"x9" 45 knots 12"x12" 45 knots 12"x18" 45 knots 12"x24" <35 knots 12"x30" <35 knots 12"x36" <35 knots 14"x12" 45 knots 16"x12" 45 knots 18"x12" 45 knots 18"x14" 45 knots 15' 20' 25' 30' 35' 40' 45' 50' 60' 70' 80' Hybrid High Speed Cruisers Extreme Duty High Performance Performance - Salt Water Super Strong Cabin Cruisers & Trawlers 4"x18" 28+ knots 4"x24" 28+ knots 4"x30" 28+ knots 14"x12" 45+ knots 17"x12" 45+ knots 18"x12" 45+ knots 19"x14" 45+ knots 21"x14" 45+ knots 24"x14" 45+ knots 25"x14" 45+ knots 29"x14" 45+ knots 12"x18" <35 knots 12"x24" <35 knots 12"x30" <35 knots 12"x36" <35 knots 16"x24" <35 knots 16"x30" <35 knots 16"x36" <35 knots 16"x42" <35 knots Standard Performance Heavy Duty 15' 20' 25' 30' 35' 40' 45' 50' 60' 70' 80' 15' 20' 25' 30' 35' 40' 45' 50' 60' 70' 80' 15' 20' 25' 30' 35' 40' 45' 50' 60' 70' 80' Trim Tab Selection Guide Lenco carries a variety of trim tabs to meet your needs. Use the guide below to choose the trim tab for the best solution for your boat. 1. Look below to find the type of boat you have. 2. At the top of the that table, find the width of your boat. Then go down the chart until you find the color option(s) available. Refer to the top of the table for the type. 3. Scan to the left to find out what size trim tab you need.
100 SERIES ELECTRIC TRIM TAB KITS 27 lencomarine.navico.com Standard Mount Trim Tab Kits 12V System The series that started the electric revolution! Our original Trim Tab design and still the most popular series we build. Ideal for center console fishing boats to cuddy cabin cruisers. Blades are constructed of 12-gauge (2.7 mm) laser cut 304 stainless steel with a 5/8" (1.6 cm) flared trailing edge & 1/8" (3.2 mm) diameter hinge pin. Upper and lower high impact corrosion proof mounting brackets with mechanical cable gland seal. Standard Finish 15001-101 Electro-Polished Finish 15113-101 IDEAL FOR BOATS: 14' to 69' (4.3 m to 21 m) Standard L" X W" Boat Length Hinge Height Min Transom Height Retail Box Part # 9" x 9" 14'–18' 2" (5.1 cm) 14" (35.6 cm) Yes 15000-101 9" x 12" 16'–25' 2" (5.1 cm) 14" (35.6 cm) Yes 15001-101 9" x 18" 22'–30' 2" (5.1 cm) 14" (35.6 cm) – 15002-101 9" x 24" 26'–40' 1" (2.5 cm) 14" (35.6 cm) – 15003-101 9" x 30" 30'–50' 1" (2.5 cm) 14" (35.6 cm) – 15004-101 9" x 36" 34'–65' 1" (2.5 cm) 14" (35.6 cm) – 15005-101 12" x 12" 17'–30' 2" (5.1 cm) 14" (35.6 cm) Yes 15007-101 12" x 18" 26'–36' 2" (5.1 cm) 14" (35.6 cm) – 15008-101 12" x 24" 30'–44' 1" (2.5 cm) 14" (35.6 cm) – 15009-101 12" x 30" 34'–54' 1" (2.5 cm) 14" (35.6 cm) – 15010-101 12" x 36" 38'–69' 1" (2.5 cm) 14" (35.6 cm) – 15011-101 Electro-polished L" X W" Boat Length Hinge Height Min Transom Height Retail Box Part # 9" x 12" 16'–25' 2" (5.1 cm) 14" (35.6 cm) Yes 15113-101 12" x 12" 17'–30' 2" (5.1 cm) 14" (35.6 cm) Yes 15114-101 Kits include: • (2) 12-gauge 304 stainless steel standard or electro-polished blades • (2) 15054-001 actuators with 6' (1.8 m) leads and Deutsch connectors • (2) 30133-103 actuator extension wiring harnesses - 20' (6.1 m) length • (2) 15085-001 upper mounting brackets with gland seal • (2) 50014-001 lower mounting brackets WARRANTY YEAR 2 YEAR WARRANTY 5 YEAR WARRANTY WARRANTY WARRANTY YEAR YEAR WARRANTY YEAR WA Y Switch kits sold separately See pages 42–45. Dimensional Drawings See page 38. 100 Series Accessories See pages 55-56.
100 SERIES ELECTRIC TRIM TAB KITS 28 lencomarine.navico.com Edge Mount Trim Tab Kits 12V System Designed for boat applications where a lower actuator mounting height is desirable. Actuator mounts at the trailing edge of the blade giving it a 1/2" (1.3 cm) lower mounting height on 9" (22.9 cm) long blades & 3" (7.6 cm) lower mounting height on 12" (30.5 cm) long blades. All edges are turned up for added strength and style. The Edge Mount blades are constructed of 12-gauge (2.7 mm) laser cut 304 stainless steel with 1" (2.5 cm) turned up edges and a 5 degree taper on both sides to the trailing edge, & 1/8" (3.2 mm) diameter hinge pin. Upper and lower high impact corrosion proof mounting brackets with mechanical cable gland seal. 15016-101 Standard Finish 15116-101 Electro-Polished Finish IDEAL FOR BOATS: 14' to 36' (4.3 m to 11 m) Standard L" X W" Boat Length Hinge Height Min Transom Height Retail Box Part # 9" x 9" 14'–18' 2" (5.1 cm) 13.5" (34.3 cm) Yes 15013-101 9" x 12" 16'–25' 2" (5.1 cm) 13.5" (34.3 cm) Yes 15014-101 12" x 9" 14'–18' 2" (5.1 cm) 11" (27.9 cm) Yes 15015-101 12" x 12" 17'–30' 2" (5.1 cm) 11" (27.9 cm) Yes 15016-101 12" x 18" 26'–36' 2" (5.1 cm) 11" (27.9 cm) – 15017-101 Electro-polished L" X W" Boat Length Hinge Height Min Transom Height Retail Box Part # 12" x 9" 14'–18' 2" (5.1 cm) 11" (27.9 cm) Yes 15115-101 12" x 12" 17'–30' 2" (5.1 cm) 11" (27.9 cm) Yes 15116-101 Kits include: • (2) 12-gauge 304 stainless steel standard finish blades • (2) 15054-001 actuators with 6' (1.8 m) leads and Deutsch connectors • (2) 30133-103 actuator extension wiring harnesses - 20' (6.1 m) length • (2) 15085-001 upper mounting brackets with gland seal • (2) 50014-001 lower mounting brackets WARRANTY YEAR 2 YEAR WARRANTY 5 YEAR WARRANTY WARRANTY WARRANTY YEAR YEAR WARRANTY YEAR WARRANT YEAR Switch kits sold separately See pages 42–45. Dimensional Drawings See page 38. 100 Series Accessories See pages 55-56.
100 SERIES ELECTRIC TRIM TAB KITS 29 lencomarine.navico.com Standard L" X W" Kit Description Switch Kit Included Part # 9" x 12" Standard Double Rocker Switch 15101-104 9" x 12" Standard Standard Integrated Switch 15104-102 9" x 12" Standard LED Integrated Switch 15108-103 12" x 12" Standard Double Rocker Switch 15103-104 12" x 12" Standard Standard Integrated Switch 15105-102 12" x 12" Standard LED Integrated Switch 15109-103 Edge Mount L" X W" Kit Description Switch Kit Included Part # 12" x 12" Edge Mount Double Rocker Switch 15102-104 12" x 12" Edge Mount Standard Integrated Switch 15106-102 12" x 12" Edge Mount LED Integrated Switch 15110-103 Standard & Edge Mount Trim Tab Kits (switch included) 12V System Everything you need in one box! The Standard and Edge Mount trim tab kit with the added benefit of having the integrated switch choice and power connector all included. The Standard blades are constructed of 12-gauge (2.7 mm) laser cut 304 stainless steel with a 5/8" (1.6 cm) flared trailing edge & 1/8" (3.2 mm) diameter hinge pin. Edge mount blades are constructed of 12-gauge (2.7 mm) laser cut 304 stainless steel with a 1" (2.5 cm) turned up edges and a 5 degree taper on both sides to the trailing edge & 1/8" (3.2 mm) diameter hinge pin. Upper and lower high impact corrosion proof mounting brackets with mechanical cable gland seal. Switch included. Kits include: • Switch Kit - Choose Double Rocker, Standard Integrated or LED Integrated • (2) 12-gauge 304 stainless steel standard finish blades • (2) 15054-001 actuators with 6' (1.8 m) leads and Deutsch connectors • (2) 30133-103 actuator extension wiring harnesses - 20' (6.1 m) length • (2) 15085-001 upper mounting brackets with gland seal • (2) 50014-001 lower mounting brackets 15001-101 Standard Mount 15113-101 Edge Mount Three switches to choose from Double Rocker Details on page 43 Standard Integrated Details on page 42 LED Integrated Details on page 42 WARRANTY YEAR 2 YEAR WARRANTY 5 YEAR WARRANTY WARRANTY WARRANTY YEAR YEAR WARRANTY YEAR WA Y IDEAL FOR BOATS: 14' to 69' (4.3 m to 21 m) Dimensional Drawings See page 38. 100 Series Accessories See pages 55-56.
100 SERIES ELECTRIC TRIM TAB KITS 30 lencomarine.navico.com Standard L" X W" Boat Length Hinge Height Min Transom Height Part # 9" x 9" 13'–20' 2" (5.1 cm) 13.5" (34.3 cm) 15034-101 9" x 12" 16'–26' 2" (5.1 cm) 13.5" (34.3 cm) 15035-101 12" x 9" 16'–26' 2" (5.1 cm) 11" (27.9 cm) 15036-101 12" x 12" 18'–32' 2" (5.1 cm) 11" (27.9 cm) 15037-101 14" x 12" 19'–34' 2" (5.1 cm) 11" (27.9 cm) 15038-101 16" x 12" 20'–36' 2" (5.1 cm) 11" (27.9 cm) 15039-101 18" x 14" 22'–40' 2" (5.1 cm) 11" (27.9 cm) 15040-101 Kits include: • (2) 12-gauge 304 stainless steel Electro-Polished blades • (2) 15054-001 actuators with 6' (1.8 m) leads & Deutsch connectors • (2) 30133-103 actuator extension wiring harnesses - 20' (6.1 m) length • (2) 15085-001 upper mounting brackets with gland seal • (2) 50014-001 lower mounting brackets 15037-101 Standard Standard Performance Trim Tab Kits 12V System Our first series designed specifically for performance. This system comes equipped with a thicker reinforced hinge and complimented with an Electro-Polished finish for added quality and protection. Blades are constructed of Electro-Polished 12-gauge (2.7 mm) laser cut 304 stainless steel with 1" (2.5 cm) turned up edges and a 5 degree taper on the inside, heavy duty hinge with 1/4" (6.4 mm) diameter hinge pin. IDEAL FOR BOATS: 13' to 40' (4 m to 12.2 m) Thicker Reinforced Hinge WARRANTY YEAR 2 YEAR WARRANTY 5 YEAR WARRANTY WARRANTY WARRANTY YEAR YEAR WARRANTY YEAR WARRANTY YEAR Switch kits sold separately See pages 42–45. Dimensional Drawings See page 38. 100 Series Accessories See pages 55-56.
100 SERIES ELECTRIC TRIM TAB KITS 31 lencomarine.navico.com Heavy-duty L" X W" Boat Length Min Transom Height Part # 12" x 12" 18'–34' 10.5" (26.7 cm) 15041-101 14" x 12" 19'–36' 10.5" (26.7 cm) 15042-101 16" x 12" 20'–38' 10.5" (26.7 cm) 15043-101 18" x 14" 22'–42' 10.5" (26.7 cm) 15044-101 Kits include: • (2) 12-gauge 304 stainless steel Electro-Polished blades • (2) 15055-001 XD Extreme Duty actuators with 6' (1.8 m) leads & Deutsch connectors • (2) 30133-103 actuator extension wiring harnesses - 20' (6.1 m) length • Note: Boat-mounting hardware to be supplied by the customer 15041-101 15042-101 15043-101 15044-101 Heavy Duty (HD) Performance Trim Tab Kits 12V System The Heavy Duty series is designed & built for the boats that need extra strength to support them in rougher water at higher speeds. Blades are constructed of Electro-Polished 12-gauge (2.7 mm) laser cut 304 stainless steel with 1" (2.5 cm) turned up edges and a 5 degree taper on the inside, heavy duty hinge with 1/4" (6.4 mm) diameter hinge pin. Full transom back plate with welded on stainless steel upper & adjustable lower actuator mounting brackets, 5/16" (.8 cm) stainless steel mounting bolts & mechanical strain-relief cable seals. 3.75" (9.5 cm) sacrificial anodes installed. IDEAL FOR BOATS: 18' to 42' (5.5 m to 12.8 m) Back Plate Dimensions The actuator leads pass through the water-tight mechanical strain-relief cable seal and the back plate before passing through the transom. This applies to all products with back plates. 10" (25.4 cm) 12"(30.5 cm) 8" (20.3 cm) 5"(12.7 cm) 2" (5.1 cm) 14" (35.6 cm) 6" (15.2 cm) 10" (25.4 cm) 8" (20.3 cm) 2" (5.1 cm) 15043-101 Heavy-duty SHIPPED FULLY ASSEMBLED WARRANTY YEAR 2 YEAR WARRANTY 5 YEAR WARRANTY WARRANTY WARRANTY YEAR YEAR WARRANTY YEAR WA Y Switch kits sold separately See pages 42–45. Dimensional Drawings See page 38. 100 Series Accessories See pages 55-56.
100 SERIES ELECTRIC TRIM TAB KITS 32 lencomarine.navico.com The actuator leads pass through the water-tight mechanical strain-relief cable seal and the back plate before passing through the transom. This applies to all products with back plates. Extreme Duty (XD) Performance Trim Tab Kits 12V System This kit is similar to our Heavy Duty Performance series with a thicker, stronger blade for those boaters who run hard in extreme conditions. Blades are constructed of Electro-Polished 10-gauge (3.4 mm) laser cut 304 stainless steel with 1" (2.5 cm) turned up edges and a 5 degree taper on the inside, heavy duty hinge with 3/8" (9.5 mm) diameter hinge pin. Full transom back plate with mechanical strain-relief cable seals, welded on stainless steel upper & adjustable lower actuator mounting brackets, 3/8" (9.5 mm) stainless steel mounting bolts. 3.75" (9.5 cm) sacrificial anodes installed. 15045-101 Single Actuator 15046-101 Dual Actuator Single Actuator L" X W" Boat Length Min Transom Height Part # 17" x 12" 20'–40' 10.5" (26.7 cm) 15045-101 Dual Actuator L" X W" Boat Length Min Transom Height Part # 19" x 14" 23'–45' 10.5" (26.7 cm) 15046-101 24" x 14" 25'–50' 10.5" (26.7 cm) 15047-101 Kits include: • (2) 10-gauge 304 stainless steel Electro-Polished blades • (2) 15056-001 XD Extreme Duty actuators with 6' (1.8 m) leads & Deutsch connectors • Note: Boat-mounting hardware to be supplied by the customer. • Note: Actuator extension harnesses not in kits, must be purchased separately (2 required for single actuator and 4 required for dual actuator). See page 56. Back Plate Dimensions 10" (25.4 cm) 12"(30.5 cm) 8" (20.3 cm) 5"(12.7 cm) 2" (5.1 cm) 15045-101 14" (35.6 cm) 6" (15.2 cm) 10" (25.4 cm) 8" (20.3 cm) 2" (5.1 cm) 15046-101 15047-101 IDEAL FOR BOATS: 20' to 40' (6.1 m to 12.2 m) single actuator 23' to 50' (7 m to 15.2 m) dual actuator SHIPPED FULLY ASSEMBLED Switch kits sold separately See pages 42–45. Actuator Extension Harnesses sold separately See page 56. WARRANTY YEAR 2 YEAR WARRANTY 5 YEAR WARRANTY WARRANTY WARRANTY YEAR YEAR WARRANTY YEAR WARRANT YEAR Dimensional Drawings See page 38. Single Dual
100 SERIES ELECTRIC TRIM TAB KITS 33 lencomarine.navico.com High Performance (HP) Trim Tab Kits 12V System This powerful, unique series is designed for multiple engine applications with limited transom space. The contoured blade design allows for extra space for engines to turn as well as decreasing and preventing cavitation to the props. Blades are constructed of Electro-Polished 7-gauge (4.6 mm) laser cut 304 stainless steel with heavy duty hinge with 3/8" (9.5 mm) diameter hinge pin. Full transom back plate with mechanical strain-relief cable seals, welded on stainless steel upper & adjustable lower actuator mounting brackets, 3/8" (9.5 mm) stainless steel mounting bolts. 3.75" (9.5 cm) sacrificial anodes installed. Kits include: • (2) 7-gauge 304 stainless steel Electro-Polished blades • (2) 15056-001 XD Extreme Duty actuators with 6' (1.8 m) leads & Deutsch connectors • Note: Boat-mounting hardware to be supplied by the customer. • Note: Actuator extension harnesses not in kits, must be purchased separately (2 required for single actuator and 4 required for dual actuator). See page 56. 15049-101 Single Actuator 15051-101 Dual Actuator IDEAL FOR BOATS: 16' to 40' (4.9 m to 12.2 m) single actuator 24' to 52' (7.3 m to 15.8 m) dual actuator Single Actuator L" X W" Boat Length Min Transom Height Part # 14" x 12" 16'–32' 10.5" (26.7 cm) 15048-101 18" x 12" 20'–40' 10.5" (26.7 cm) 15049-101 Dual Actuator L" X W" Boat Length Min. Transom Height Part # 21" x 14" 24'–42' 10.5" (26.7 cm) 15050-101 25" x 14" 28'–46' 10.5" (26.7 cm) 15051-101 29" x 14" 30'–52' 10.5" (26.7 cm) 15068-101 Back Plate Dimensions 15048-101 15049-101 15050-101 15051-101 15068-101 10" (25.4 cm) 12"(30.5 cm) 8" (20.3 cm) 5"(12.7 cm) 2" (5.1 cm) 14" (35.6 cm) 6" (15.2 cm) 10" (25.4 cm) 8" (20.3 cm) 2" (5.1 cm) Switch kits sold separately See pages 42–45. Actuator Extension Harnesses sold separately See page 56. WARRANTY YEAR 2 YEAR WARRANTY 5 YEAR WARRANTY WARRANTY WARRANTY YEAR YEAR WARRANTY YEAR WA Y The actuator leads pass through the water-tight mechanical strain-relief cable seal and the back plate before passing through the transom. This applies to all products with back plates. SHIPPED FULLY ASSEMBLED Dimensional Drawings See page 38. Single Dual
100 SERIES ELECTRIC TRIM TAB KITS 34 lencomarine.navico.com Kits include: • (2) 7-gauge 304 stainless steel standard finish blades • (2) 15055-001 12 Volt (15062-001 for 24 Volt) XD Extreme Duty actuators with 6' (1.8 m) & Deutsch connectors • (2) 15140-001 120 Lower Mounting Brackets • Note: Actuator extension harnesses not in kits, must be purchased separately (2 required for single actuator and 4 required for dual actuator). See page 56. 15018-101 Single Actuator 15022-101 Dual Actuator Super Strong Trim Tab Kits 12V & 24V Systems This Super Strong design is for sport fishing, large cruising and commercial vessels. This series has a completely flat blade design which reduces spray giving you a clean, dry ride. Blades are constructed of 7-gauge (4.6 mm) laser cut 304 stainless steel with 3/8" (9.5 mm) diameter hinge pin. High impact corrosion proof upper and lower mounting brackets with mechanical gland cable seal, 5/16" (.8 cm) upper and 3/8" (9.5 mm) lower stainless steel mounting bolts. 3.75" (9.5 cm) sacrificial anodes installed. Single Actuator Voltage L" X W" Boat Length Part # 12V 12" x 18" 24' – 40' 15018-101 12V 12" x 24" 27' – 44' 15019-101 12V 12" x 30" 30' – 48' 15020-101 12V 12" x 36" 33' – 52' 15021-101 24V 12" x 18" 24' – 40' 15026-101 24V 12" x 24" 27' – 44' 15027-101 24V 12" x 30" 30' – 48' 15028-101 24V 12" x 36" 33' – 52' 15029-101 Dual Actuator Voltage L" X W" Boat Length Part # 12V 16" x 24" 35' – 50' 15022-101 12V 16" x 30" 40' – 60' 15023-101 12V 16" x 36" 45' – 70' 15024-101 12V 16" x 42" 50' – 80' 15025-101 24V 16" x 24" 35' – 50' 15030-101 24V 16" x 30" 40' – 60' 15031-101 24V 16" x 36" 45' – 70' 15032-101 24V 16" x 42" 50' – 80' 15033-101 IDEAL FOR BOATS: 24' to 52' (7.3 m to 15.8 m) single actuator 35' to 80' (10.6 m to 24.4 m) dual actuator Switch kits sold separately See pages 42–45. Actuator Extension Harnesses sold separately See page 56. WARRANTY YEAR 2 YEAR WARRANTY 5 YEAR WARRANTY WARRANTY WARRANTY YEAR YEAR WARRANTY YEAR WARRANTY YEAR Dimensional Drawings See page 38.
100 SERIES ELECTRIC TRIM TAB KITS 35 lencomarine.navico.com LS-Limited Space Trim Tab Kits 12V System Engineered to fit behind ladders. This unique design gives you all the benefits of a standard tab in an ultra compact design. Blades are constructed of a stronger 11-gauge laser cut 304 stainless steel and 3/8" (9.5 mm) diameter hinge pin. Upper and lower high impact corrosion proof mounting brackets with mechanical cable gland seal. Standard Actuator L" X W" Min Transom Height Hinge Height Actuators In Kit Blade Finish Part # 4" x 12" 14.5" (36.8 cm) 2" (5.1 cm) 15054-001 Standard 15125-101 4" x 12" 14.5" (36.8 cm) 2" (5.1 cm) 15054-001 Electro-Polished 15126-101 XDS Actuator L" X W" Min Transom Height Hinge Height Actuators In Kit Blade Finish Part # 4" x 12" 13" (33 cm) 2" (5.1 cm) 15057-001 Standard 15052-101 4" x 12" 13" (33 cm) 2" (5.1 cm) 15057-001 Electro-Polished 15088-101 Kits include: • (2) 11-gauge 304 stainless steel blades with option of standard finish or electro-polished finish • (2) actuators with 6' (1.8 m) lead and Deutsch connectors • (2) 30133-103 actuator extension wiring harnesses - 20' (6.1 m) length • (2) 15085-001 upper mounting brackets with gland seal • Lower mounting brackets included 15126-101 Standard Actuator 15088-101 XDS Actuator IDEAL FOR BOATS: 14' to 25' (4.3 m to 7.6 m) WARRANTY YEAR 2 YEAR WARRANTY 5 YEAR WARRANTY WARRANTY WARRANTY YEAR YEAR WARRANTY YEAR WA Y Switch kits sold separately See pages 42–45. Dimensional Drawings See page 38. 100 Series Accessories See pages 55-56.
100 SERIES ELECTRIC TRIM TAB KITS 36 lencomarine.navico.com Airboat Trim Tab Kit 12V System The world’s first Airboat specific design. The planing surface provides greater lift and less drag. Engineered to prevent the tab from digging in during hard turns resulting in a safer ride. Blade is constructed of 12-gauge (2.7 mm) laser cut 304 stainless steel with a welded on stainless steel adjustable lower actuator mounting bracket & 1/8" (3.2 mm) diameter hinge pin. High impact corrosion proof upper mounting bracket with mechanical cable gland seal. L" X W" Actuator In Kit Description Part # 9" x14" 15055-001 Airboat Kit without Switch 15112-101 Kit includes: • (1) 12-gauge 304 stainless steel standard finish blade with 2" (5.1 cm) hinge height • (1) actuator with 6' (1.8 m) lead and Deutsch connector • (1) 30133-002 actuator extension wiring harness - 14' (4.3 m) length • (1) 15085-001 upper mounting bracket with gland seal • Lower mounting bracket included 15112-101 Extended Retracted Airboat Switch sold separately See page 44. WARRANTY YEAR 2 YEAR WARRANTY 5 YEAR WARRANTY WARRANTY WARRANTY YEAR YEAR WARRANTY YEAR WARRANTY YEAR Dimensional Drawings See page 38. 100 Series Accessories See pages 55-56.
100 SERIES ELECTRIC TRIM TAB KITS 37 lencomarine.navico.com IDEAL FOR BOATS: 30' to 60' (9.1 m to 18.3 m) Hybrid Trim Tab Kits 12V & 24V Systems Engineered to combine the benefits and features of our Limited Space and Super Strong series. This ultra-compact design utilizes a greater deflection angle creating substantial lift with less surface area. Blades constructed of 7-gauge (4.6 mm) laser cut 304 stainless steel with 3/8" (9.5 mm) diameter hinge pin. High impact corrosion proof upper and lower mounting brackets with mechanical gland cable seal, 5/16" (.8 cm) upper and lower stainless steel mounting bolts. Also includes (2) 3.75" (9.5 cm) sacrificial anodes installed. Kits include: • (2) 7-gauge 304 stainless steel blades with standard finish • (2) Standard actuators with 6' (1.8 m) lead and Deutsch connectors • (2) 15085-001 upper mounting brackets with gland seal • (2) 50014-001 lower mounting brackets • Note: Actuator extension harnesses not in kits, must be purchased separately (2 required). See page 42. Voltage L" X W" Boat Length Part # 12V 4" x 18" 30'–44' 15145-101 12V 4" x 24" 42'–52' 15146-101 12V 4" x 30" 48'–60' 15147-101 24V 4" x 18" 30'–44' 15148-101 24V 4" x 24" 42'–52' 15149-101 24V 4" x 30" 48'–60' 15150-101 Bennett® Hydraulic-to-Lenco Electric Conversion Kit Now you don't have to buy a new boat or an entire new set of trim tabs to get all the advantages of the latest in trim tab technology. Lenco’s high-performance instant response actuators are now available to retro fit any boat equipped with the standard length Bennett hydraulic cylinders. Voltage L" X W" Boat Length Part # 12V 4" x 18" 30'–44' 15145-101 12V 4" x 24" 42'–52' 15146-101 15146-101 WARRANTY YEAR 2 YEAR WARRANTY 5 YEAR WARRANTY WARRANTY WARRANTY YEAR YEAR WARRANTY YEAR WAR Y Switch kits sold separately See pages 42–45. Actuator Extension Harnesses sold separately See page 56. Dimensional Drawings See page 38.
100 SERIES ELECTRIC TRIM TAB KITS 38 lencomarine.navico.com 9"–18" (22.86–45.72 cm) 9"–14" (22.86–35.56 cm) 11" (27.94 cm) Dimensional Drawings for Trim Tab Kits Standard Mount Standard Performance Heavy Duty (HD) Performance Extreme Duty (XD) Perfomance Edge Mount Single Actuator Dual Actuator 2" (5.08 cm) 2" (5.08 cm) 9"–18" (22.86–45.72 cm) 9"–14" (22.86–35.56 cm) 9"–18" (22.86–45.72 cm) 9"–14" (22.86–35.56 cm) 10" (25.4 cm) 10" (25.4 cm) 9"–12" (22.86–30.48 cm) 9"–36" (22.86–91.44 cm) 14" (35.56 cm) 9"–12" (22.86–30.48 cm) 9"–18" (22.86–45.72 cm) 13.5" (34.29 cm) for actuator in 9" (22.86 cm) tab length 12" (30.48 cm) for actuator in 12" (30.48 cm) tab length 12"–18" (30.48–45.72 cm) 12"–14" (30.48–35.56 cm) 2" (5.08 cm) 2" (5.08 cm) 2" (5.08 cm) 2" (5.08 cm) 10" (25.4 cm) Note: Heights are approximate due to variablity of transom angle. L W
100 SERIES ELECTRIC TRIM TAB KITS 39 lencomarine.navico.com Dimensional Drawings for Trim Tab Kits High Performance Super Strong LS-Limited Space Airboat Hybrid Single Actuator Single Actuator Dual Actuator Dual Actuator 10" (25.4 cm) 10" (25.4 cm) 14" (35.56 cm) 14" (35.56 cm) 12"–16" (30.58–40.64 cm) 16" (40.64 cm) 18"–36" (45.72–91.44 cm) 14" (35.56 cm) 24"–42" (60.96–106.68 cm) Note: Heights are approximate due to variablity of transom angle. 4" (10.16 cm) 4" (10.16 cm) 9" (22.86 cm) 12" (30.48 cm) 18"-30" (45.72–76.2 cm) 12" (30.48 cm) 14" (35.56 cm) 14"–18" (35.56–45.72 cm) 21"–29" (53.34–73.66 cm) 2" (5.08 cm) 2" (5.08 cm) 2" (5.08 cm) 2" (5.08 cm) 2" (5.08 cm) 2" (5.08 cm) 2" (5.08 cm) 12" (30.48 cm) 12" (30.48 cm) 12" (30.48 cm) L W
100 SERIES CONTROLS & SWITCHES Lenco controls and switches allow users to position and balance their boat with ease and are precision engineered for superior response times.
100 SERIES CONTROLS & SWITCHES Standard Integrated Switch Kit 34 LED Integrated Switch Kit 34 LED Indicator (TWO-PIECE) Switch Kit 35 Double Rocker Switch Kit 35 Airboat Trim Tab Rocker Switch 36 Flybridge Standard Integrated Indicator Kits 36 Flybridge LED Integrated Indicator Kits 37 Flybridge LED (Two-Piece) Indicator Kits 37
100 SERIES CONTROLS & SWITCHES 42 lencomarine.navico.com Features • Simple, quick, Plug & Play installation • Instant response • Built-in retractor • Low profile keypad design • Self-contained keypad with waterproof Plug & Play Deutsch connectors • Wiring harness length 30" (76.2 cm) from the back of the switch bezel • 36" power pigtail • 2-1/16" hole cut-out size, overall keypad size of 2.75" x 2.75" • 4.08" clearance required from the back of the keypad's mounting location Features • Simple, quick, Plug & Play installation • Instant response • Built-in retractor • Low profile keypad design • Self-contained keypad with waterproof Plug & Play Deutsch connectors • Wiring harness length 30" (76.2 cm) from the back of the switch bezel • 36" power pigtail (single actuator) or 72" power pigtail (dual actuator) • 2-1/16" hole cut-out size, overall keypad size of 2.75" x 2.75" • 4.08" clearance required from the back of the keypad's mounting location • Two high-intensity LED Indicator displays show the exact position of your trim tabs at all times • Photo Eye for optimum viewing in all light conditions • Backlit keypad for optimum viewing at night • Self-Check feature (single) Standard Integrated Switch Kit 12 & 24 Volt The standard (All-In-One) integrated tactile switch improves accuracy and integrates the control box functionality into the keypad bezel. LED Integrated Switch Kit 12 & 24 Volt The LED indicator (All-In-One) integrated tactile switch for use with single or dual actuator systems, improves accuracy and integrates the control box functionality into the keypad bezel. 15169-001 Single Actuator Single Actuator Description Power Pigtail Part # Standard Integrated Switch Kit 36" (91.4 cm) 15169-001 Single Actuator Description Power Pigtail Part # LED Integrated Switch Kit 36" (91.4 cm) 15170-001 Dual Actuator Description Power Pigtail Part # LED Integrated Switch Kit 72" (1.8 m) 15171-001 15170-001 Single Actuator 15171-001 Dual Actuator ATTENTION: REPLACEMENT KEYPADS & CONTROL BOXES FOR 2016 AND PRIOR SWITCHES ARE NOT COMPATIBLE WITH THESE SWITCH KITS. NTY AR 2 AR NTY 5 YEAR WARRANTY 10 YEAR WARRANTY NTY WARRANTY AR YEAR WARRANTY YEAR WARRANTY YEAR WARRANTY YEAR 2 YEAR WARRANTY 5 YEAR WARRANTY 10 YEAR WARRANTY WARRANTY WARRANTY YEAR YEAR WARRANTY YEAR WARRANTY YEAR Replacement Pigtails See page 56. Dimensional Drawings See page 46. Replacement Pigtails See page 56. Dimensional Drawings See page 46.
100 SERIES CONTROLS & SWITCHES 43 lencomarine.navico.com Single Actuator Description Power Pigtail Part # LED Indicator (TWO-PIECE) Switch Kit 36" (91.4 cm) 15270-001 LED (TWO-PIECE) Keypad only 30343-001 (TWO-PIECE) Control box - Single 30340-001 Dual Actuator Description Power Pigtail Part # LED Indicator (TWO-PIECE) Switch Kit 72" (1.8 m) 15271-001 LED (TWO-PIECE) Keypad only 30343-001 (TWO-PIECE) Control box - Single 30340-001 Single Actuator Description Power Pigtail Part # Double Rocker Switch Kit 36" (91.4 cm) 10222-211D Dual Actuator Description Power Pigtail Part # Double Rocker Switch Kit 72" (1.8 m) 10221-211D LED Indicator (TWO-PIECE) Switch Kit 12 & 24 Volt The LED Two Piece Kits are for use with single or dual actuator systems with a shortened bezel requiring less depth to mount. Functionality is built into the separate control box and must be mounted remotely. 15271-001 Dual Actuator 15270-001 Single Actuator Features • Simple, quick, Plug & Play installation • Instant response • Built-in retractor • Low profile keypad design • Self-contained, solid state control box with waterproof Plug & Play Deutsch connectors • 36" power pigtail (single actuator) or 72" power pigtail (dual actuator) for control box • 2-1/16" hole cut-out size, overall keypad size of 2.75" x 2.75" • 2.33" clearance required from the back of the keypad's mounting location • Two high-intensity LED Indicator displays show the exact position of your trim tabs at all times • Photo Eye for optimum viewing in all light conditions • Backlit keypad for optimum viewing at night • Self-Check feature (single) Double Rocker Switch Kit 12 & 24 Volt | Single & Dual Actuator Systems Double Rocker Switch available for Standard Trim Tabs, Standard & HD Performance Tabs single or dual actuator systems. Does not have retractor feature. 10221-211D Dual Actuator 10222-211D Single Actuator Kit Includes: • #122 Carling Double Rocker Switch • Plug and Play Deutsch Connectors • 36" (91.4 cm) power pigtail (Single) and 72" (182.9 cm) power pigtail (Dual) • Installation hardware included • 2.25" hole cut-out size, overall keypad size of 2.75" x 2.75" ATTENTION: REPLACEMENT KEY PADS & CONTROL BOXES FOR 2016 AND PRIOR SWITCHES ARE NOT COMPATIBLE WITH THIS SWITCH KIT. WARRANTY YEAR 2 YEAR WARRANTY 5 YEAR WARRANTY 10 YEAR WARRANTY WARRANTY WARRANTY YEAR YEAR WARRANTY YEAR WARRANTY YEAR WARRANTY YEAR 2 YEAR WARRANTY 5 YEAR WARRANTY 10 YEAR WARRANTY WARRANTY WARRANTY YEAR YEAR WARRANTY YEAR WARRANTY YEAR Replacement Pigtails See page 56. Dimensional Drawings See page 46. Replacement Pigtails See page 56. Dimensional Drawings See page 46.
www.osculati.comRkJQdWJsaXNoZXIy MjM2MTk=